Compressive and Tensile Behaviours of PLLA Matrix Composites Reinforced with Randomly Dispersed Flax Fibres

Nowadays, the ecological footprint of a material is becoming tremendously important. The Poly l-Lactide Acid (PLLA) matrix composites reinforced by randomly scattered flax fibres have mechanical properties similar to polyester/glass composites [1], lower environmental impacts and can be compost at the end of their lives. In this study, the mechanical characterization of biocomposites has been pushed further with the determination of the compressive and tensile properties. Furthermore, the mechanical properties of single flax fibres have been measured and implemented in a micro-mechanical estimation of the composite elastic modulus. Tensile and compressive stiffness determined by the mechanical analyses show very good correlations with the mathematical estimation.     

Morphological contrast index based on the Weber's law

In this article, a morphological contrast index based on the Weber's law is proposed to quantify the contrast in a processed image. This measure involves the contours of the image along with its background. The proposal made here is applied to detect the image with higher contrast, and also identify the enhanced image most similar to the original. Moreover, the contrast index is compared with other four indexes reported in the current literature. © 2012 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 22, 137–144, 2012     

Ion Beam Analysis and Normal-State Conduction Mechanisms for (Bi, Pb)-2223 and (Tl, Pb)/Sr-1212 Superconducting Phases Substituted by Ruthenium

Superconducting samples of type Bi_1.8Pb_0.4Sr₂Ca_2.1Cu_3−x Ru _x O_10+δ , (Bi, Pb)-2223, with 0.0≤x≤0.4 and type Tl_0.5Pb_0.5Sr_1.6Ba_0.4CaCu_2−x Ru _x O_7−δ , (Tl, Pb)/Sr-1212, with 0.0≤x≤0.525 were synthesized using the standard solid-state reaction technique. The lattice parameters and the surface morphology for these samples were determined using X-ray powder diffraction (XRD) and scanning electron microscope (SEM) measurements, respectively. All element-contents of the samples prepared were estimated from the electron dispersive X-ray (EDX) technique, and their results were compared with those obtained from particle-induced X-ray emission (PIXE). In addition, the oxygen-content was determined using elastic Rutherford backscattering spectroscopy (RBS) technique at 3 MeV proton beam. The superconducting transition temperature T _c and the hole carrier concentration P were determined from the electrical resistivity measurement. The data of both T _c and P for Bi_1.8Pb_0.4Sr₂Ca_2.1Cu_3−x Ru _x O_10+δ and Tl_0.5Pb_0.5Sr_1.6Ba_0.4CaCu_2−x Ru _x O_7−δ phases increased up to x=0.05 and 0.075, respectively and then they decreased as x increased. The superconductivity was completely destroyed around x=0.4 and 0.525 for (Bi, Pb)-2223 and (Tl, Pb)/Sr-1212 phases, respectively. The normal-state electrical resistivity data were analyzed using the two and three dimensional variable range hopping (2D-VRH and 3D-VRH) and the Coulomb gab (CG).     

Superconducting Vortex Lattice Configurations on Periodic Potentials: Simulation and Experiment

Nb films have been fabricated on top of array of Ni nanodots. The array of periodic pinning potentials modifies the vortex lattice for specific values of the external applied magnetic field. By means of an implemented code developed from scratch, computer simulations based only on the vortex?Cvortex and the vortex?Cnanodot interactions provide the total interaction between vortices and pinning sites as well as the position of the vortices in the array unit cell. This simulation approach could be performed on square, rectangular or triangular arrays of nanodefects of different size.     

The effect of the martensitic packet size on the machinability of modified AISI P20 prehardened mold steel

The effect of martensitic packet size on the machinability of prehardened mold steel at a hardness of ~40 HRC (typical hardness for prehardened mold steels) was studied in terms of cutting force and tool life. The machinability tests were performed in end milling using coated, cemented carbide tools at three different cutting speeds. The results showed that an increase in the martensite packet size led to higher cutting force and shorter tool life. The increase in cutting force was related to the increase of work hardening. The work material with a coarser martensite packet size showed a higher amount of work hardening that can explain the higher cutting force. The longer tool life in the workpieces with finer structure was correlated to smaller amplitude of the variation in cutting force.     

Nanometric Scale Investigation of Phase Transformations in Advanced Steels for Automotive Application

The current trend toward producing lighter vehicles in the automotive industry is driven by the need to conform to the new exhaust emission control regulations. This objective presents a challenge to steel manufacturers. The difficulty lies in designing new alloys with an optimum strength/formability/cost balance for the various components. Here, the key to success lies in controlling the steel microstructure and especially the phase transformations at the smallest possible scale. Among the different alloying elements, light elements such as carbon and boron are of prime importance due to their major effects on the kinetics of phase transformations. Characterization tools combining high spatial and analytical resolution such as secondary ion mass spectrometry (SIMS) and field emission gun-transmission electron microscopy (TEM) were used. In this article, the examples presented are as follows. (1) Boron segregation and precipitation effects to control hardenability in martensitic steels. (2) Local carbon distribution in advanced high-strength steels, with a specific emphasis on martensite tempering. Links have been established between the boron and carbon distribution and the formability.     

A cross‐cultural comparison of colour emotion for two‐colour combinations

Psychophysical experiments were conducted in the UK, Taiwan, France, Germany, Spain, Sweden, Argentina, and Iran to assess colour emotion for two‐colour combinations using semantic scales warm/cool, heavy/light, active/passive, and like/dislike. A total of 223 observers participated, each presented with 190 colour pairs as the stimuli, shown individually on a cathode ray tube display. The results show consistent responses across cultures only for warm/cool, heavy/light, and active/passive. The like/dislike scale, however, showed some differences between the observer groups, in particular between the Argentinian responses and those obtained from the other observers. Factor analysis reveals that the Argentinian observers preferred passive colour pairs to active ones more than the other observers. In addition to the cultural difference in like/dislike, the experimental results show some effects of gender, professional background (design vs. nondesign), and age. Female observers were found to prefer colour pairs with high‐lightness or low‐chroma values more than their male counterparts. Observers with a design background liked low‐chroma colour pairs or those containing colours of similar hue more than nondesign observers. Older observers liked colour pairs with high‐lightness or high‐chroma values more than young observers did. Based on the findings, a two‐level theory of colour emotion is proposed, in which warm/cool, heavy/light, and active/passive are identified as the reactive‐level responses and like/dislike the reflective‐level response. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2012     

Incorporation of polyfluorenes into poly(lactic acid) films for sensor and optoelectronics applications

Films of neat and plasticized biodegradable poly(lactic acid) (PLA) matrices containing anionic conjugated polyelectrolytes, poly[9,9‐bis(4‐phenoxybutylsulfonate)]fluorene‐2,7‐diyl‐alt‐arylenes, with 1,4‐phenylene and 4,4″‐p‐terphenylene, respectively, as arylene groups or a neutral poly(9,9‐dialkylfluorene) for comparison were prepared by solution casting. These films were characterized using differential scanning calorimetry, thermogravimetry, scanning electron microscopy and fluorescence spectroscopy. In addition, the effects of plasticizer on the thermal properties and the oxygen permeability of the PLA films were measured through the oxygen transmission rate. Results show that it is possible to obtain thin, optically transparent and luminescent films with potential in oxygen sensing, exhibiting good thermal and photochemical stability. At high polyelectrolyte content, evidence is found for phase separation and aggregate formation and it is no longer possible to obtain completely homogeneous films. The possibility of incorporating the cationic metal complex tris(2,2′‐bipyridyl)ruthenium(II) into plasticized PLA films containing conjugated polyelectrolytes for dual‐wavelength ratiometric luminescence sensing is also discussed. Copyright © 2012 Society of Chemical Industry