Magnetic domain imaging of nano‐magnetic films using magnetic force microscopy with polar and longitudinally magnetized tips

Perpendicular or parallel magnetic fields are used to magnetize the tips used in magnetic force microscopy (MFM). In this process, perpendicular or parallel magnetic dipole moments are produced on the tip plane, thus leading to the formation of polar magnetized tips (PM‐tips) or longitudinally magnetized tips (LM‐tips), respectively. The resolution of an MFM image of a magneto‐optic disk is used for calibration of these tips, and the saturated magnetic fields of the PM‐ and LM‐tips are found to be 2720 Oe and 680 Oe, respectively. Because both tips can simultaneously magnetize the sample during the scanning process when measuring a Co thin film, clear MFM images are captured, which enable the identification of magnetizable regions and the distribution of the magnetic domains on the sample surface. These results will be useful for improving the manufacturing processes required for soft nano‐magnetic film production.     

Assessment of the Moderate-Resolution Imaging Spectroradiometer algorithm for retrieval of aerosol parameters over the ocean

The Moderate Resolution Imaging Spectroradiometer aerosol algorithm over the ocean derives spectral aerosol optical depth and aerosol size parameters from satellite measured radiances at the top of the atmosphere (TOA). It is based on the adding of apparent optical properties (AOPs): TOA reflectance is approximated as a linear combination of reflectances resulting from a small particle mode and a large particle mode. The weighting parameter eta is defined as the fraction of the optical depth at 550 nm due to the small mode. The AOP approach is correct only in the single scattering limit. For a physically correct TOA reflectance simulation, we create linear combinations of the inherent optical properties (IOPs) of small and large particle modes, in which the weighting parameter f is defined as the fraction of the number density attributed to the small particle mode. We use these IOPs as inputs to an accurate multiple scattering radiative transfer model. We find that reflectance errors incurred with the AOP method are as high as 30% for an aerosol optical depth of 2 at 550 nm. The retrieved optical depth has a relative error of up to 8%, and the retrieved fraction eta has an absolute error of approximately 6%. We show that the use of accurate radiative transfer simulations and a bimodal fraction f yields accurate values for the retrieved optical depth and the fraction f.     

EK100 and Antrodin C Improve Brain Amyloid Pathology in APP/PS1 Transgenic Mice by Promoting Microglial and Perivascular Clearance Pathways

Alzheimer’s disease (AD) is characterized by the deposition of β-amyloid peptide (Aβ). There are currently no drugs that can successfully treat this disease. This study first explored the anti-inflammatory activity of seven components isolated from Antrodia cinnamonmea in BV2 cells and selected EK100 and antrodin C for in vivo research. APPswe/PS1dE9 mice were treated with EK100 and antrodin C for one month to evaluate the effect of these reagents on AD-like pathology by nesting behavior, immunohistochemistry, and immunoblotting. Ergosterol and ibuprofen were used as control. EK100 and antrodin C improved the nesting behavior of mice, reduced the number and burden of amyloid plaques, reduced the activation of glial cells, and promoted the perivascular deposition of Aβ in the brain of mice. EK100 and antrodin C are significantly different in activating astrocytes, regulating microglia morphology, and promoting plaque-associated microglia to express oxidative enzymes. In contrast, the effects of ibuprofen and ergosterol are relatively small. In addition, EK100 significantly improved hippocampal neurogenesis in APPswe/PS1dE9 mice. Our data indicate that EK100 and antrodin C reduce the pathology of AD by reducing amyloid deposits and promoting nesting behavior in APPswe/PS1dE9 mice through microglia and perivascular clearance, indicating that EK100 and antrodin C have the potential to be used in AD treatment.     

Synthesis and characterization of sol-gel derived gallium-doped zinc oxide thin films

Gallium-doped ZnO (GZO) semiconductor thin films were prepared by a sol-gel spin coating process. The effects of Ga dopant concentrations on the microstructure, electrical resistivity, optical properties, and photoluminescence (PL) were studied. XRD results showed that all the as-prepared GZO films had a wurtzite phase and a preferred orientation along the [0 0 2] direction. ZnO thin films doped with Ga had lower electrical resistivity, lower RMS roughness, and improved optical transmittance in the visible region. The lowest average electrical resistivity value, 2.8 × 10² Ω cm, was achieved in the ZnO thin films doped with 2% Ga, which exhibited an average transmittance of 91.5%. This study also found that the optical band gap of Ga-doped films was 3.25 eV, slightly higher than that of undoped samples (3.23 eV), and the PL spectra of GZO films showed strong violet-light emission centers at about 2.86 eV (the corresponding wavelength of which is about 434 nm).     

Fe–Nx/C electrocatalysts synthesized by pyrolysis of Fe(II)–2,3,5,6-tetra(2-pyridyl)pyrazine complex for PEM fuel cell oxygen reduction reaction

2,3,5,6-Tetra(2-pyridyl)pyrazine (TPPZ) was employed as a ligand to prepare an iron(II) complex (Fe–TPPZ) that served as a precursor to synthesize carbon-supported catalysts (Fe–N_x/C) through heat-treatment at 600, 700, 800 and 900 °C under N₂ atmosphere. Both the structure and composition of the synthesized Fe–N_x/C were analyzed by X-ray diffraction and energy-dispersive X-ray microanalysis, respectively. The rotating disk and ring-disk electrode measurements showed that these catalysts have strong ORR activity with an overall 4-electron transfer process through a (2 + 2)-electron transfer mechanism, which was assigned to the catalytic function of the Fe–N_x center. A study on the heat-treatment temperature on the ORR activity showed that 800 °C is the optimal temperature for the synthesized catalysts. Furthermore, the effect of both catalyst and Nafion^® ionomer loadings in the catalyst layer on the corresponding ORR activity was also investigated. The kinetic parameters such as the chemical reaction rate between O₂ and Fe–N_x/C (adduct formation reaction), the rate constant for the rate-determining step (RDS), and the electron numbers in the ORR, were obtained. The methanol tolerance of the catalyst was also tested. To validate the ORR activity, a membrane electrode assembly in which the cathode catalyst layer contained Fe–N_x/C was constructed and tested in a real fuel cell. The results obtained are encouraging when compared with similar non-noble catalysts.     

Structural and optical studies on sol–gel derived ZnO thin films by excimer laser annealing

High-quality polycrystalline ZnO thin films were deposited onto alkali-free glasses at a temperature of 300°C in air ambience by combining sol–gel spin coating and KrF excimer laser annealing. The effects of laser irradiation energy density on the crystallization, microstructure, surface morphology, and optical transmittance of as-prepared ZnO thin films were investigated and compared to the results of thermally annealed ZnO thin films. The crystallinity level and average crystallite size of laser annealed ZnO thin films increased as laser energy density increased. The crystallinity levels and average crystallite size of excimer laser annealed (ELA) thin films were greater than those of the thermally annealed (TA) thin films. However, laser annealed thin films had abnormal grain growth when irradiation energy density was 175 mJ/cm². Experimental results indicated that the optimum irradiation energy density for excimer laser annealing of ZnO sol–gel films was 150 mJ/cm². The ELA 150 thin films had a dense microstructure, an RMS roughness value of 5.30 nm, and an optical band gap of 3.38 eV, close to the band gap of a ZnO crystal (3.4 eV).     

Removing tool marks of blade surfaces by smoothing five-axis point milling cutter paths

Focused on the reverse movements of moving axes along five-axis tool paths, this study presents a procedure of removing a gouge phenomenon on impeller surfaces in five-axis machining. That is, when an impeller of a centrifugal compressor is being cut in finish milling, reverse movements and/or other linearization problems of moving axes along a five-axis interference-free tool path may make a cutter leave tool marks on the impeller surfaces. For generating interference-free cutter location (CL) data needed in rough, semi-finish and finish five-axis cutting processes, first, a simple yet useful approach is proposed. To identify the potential gouge area and to solve the problem for a tool path having reverse motion directions with its moving axes in finish milling, the CL data are further smoothed to remove the reverse movements about its rotating and tilting axes. The effectiveness of this procedure has been experimentally confirmed by successful five-axis finish milling of an impeller without leaving tool marks on its surfaces. In addition, with the spline tool paths, the machining time can be saved up to 23.57%.     

The effect of grain size and aging on hydrogen embrittlement of a maraging steel

Notched tensile tests were conducted under a slow displacement rate to evaluate the influences of grain size and aging on hydrogen embrittlement (HE) of T-200 maraging steel. In addition, an electrochemical permeation method was employed to measure the effective diffusivity (D_eff) and apparent solubility (C_app) for hydrogen of various heat-treated specimens. The results indicated that the aged (482 °C/4 h) specimens comprised of numerous precipitates led to a raised C_app and a decreased hydrogen diffusivity as compared to those of the solution-treated ones. The solution-treated specimens were resistant to gaseous HE, whereas aged specimens were susceptible to it, implying the strength level was the controlling factor to affect the HE susceptibility of the specimens. Nevertheless, all specimens suffered from sulfide stress corrosion cracking (SSCC) severely but to different degrees. The aged specimens were more likely to form intergranular (IG) fractures in H₂S but quasi-cleavage (QC) in H₂. For the solution-treated specimens, a fine-grained structure was susceptible to HE in H₂S and revealed mainly QC that differed from the IG fracture of the coarse-grained one. The fracture mode of the specimens could also be related to the transport path and / or the supply of hydrogen to the plastic zone of notched specimens in hydrogen-containing environments.     

Optimal contracts decision of industrial customers

This paper develops a software package to calculate the optimal contract capacities for industrial customers. Based on the time-of-use (TOU) rates employed by the Taiwan Power Company, the objective function is formulated, to minimize the electricity bill of industrial customers during the whole year period. Evolutionary programming (EP) was adopted to solve this problem. Users can get the optimal contract capacities for the peak load, semi-peak load, and off-peak load, respectively. Practical load consumption data were used to prove the validity of this program. Results show that the software developed in this paper can be used as a useful tool for industrial customers in selecting contract capacities to curtail the electricity bill.