A novel approach to design optimal 2-D digital differentiator using vortex search optimization algorithm

Multimedia Tools and Applications - The designing of 2-D digital differentiator is multimodal and high dimensional problem which requires large number of differentiator coefficients to be...     

用椰壳制活性炭吸附去除三价铋离子(英文)

In present study,we report the preparation of coconut shell activated carbon as adsorbent and its appli-cation for Bi(Ⅲ) removal from aqueous solutions.The developed adsorbent was characterized with scanning elec-tron microscope(SEM),Fourier Transform Infrared(FTIR),C,H,N,S analyzer,and BET surface area analyzer.The parameters examined include agitation time,initial concentration of Bi(Ⅲ),adsorbent dose and temperature.The maximum adsorption of Bi(Ⅲ)(98.72%) was observed at 250 mg·L-1 of Bi(Ⅲ) and adsorbent dose of 0.7 g when agitation was at 160 r·min-1 for 240 min at(299±2) K.The thermodynamic parameters such as Gibb’s free energy(△Gθ),enthalpy(△Hθ) and entropy(△Sθ) were evaluated.For the isotherm models applied to adsorption study,the Langmuir isotherm model fits better than the Freundlich isotherm.The maximum adsorption capacity from the Langmuir isotherm was 54.35 mg?g?1 of Bi(Ⅲ).The kinetic study of the adsorption shows that the pseudo second order model is more appropriate than the pseudo first order model.The result shows that,coconut shell ac-tivated carbon is an effective adsorbent to remove Bi(Ⅲ) from aqueous solutions with good adsorption capacity.     

Effect of Nb doping on structural and electric properties of PZT (65/35) ceramic

The aim of this study is to determine the effect of Nb⁵⁺ doping on PZT (65/35) based bulk materials in their structure, micro structure and electrical properties. The Nb content was chosen 0-9 mole%. These materials were prepared by conventional mixed oxide method. X ray diffraction studies suggest the compound to be of rhombohedral perovskite phase. Excess addition of Nb result in pyrochlore and fluorite phase develops in PZT (65/35) sample. Detailed studies of dielectric constant as a function of temperature (40degC to 500degC) and frequency (100 Hz to 1 MHz) suggest that the compounds undergo diffuse type of phase transition. Maximum dielectric constant and resistivity were found to be strongly dependent on doping and measuring frequencies. Using complex impedance analysis micro structural parameters such as bulk and grain boundary resistance, bulk charge carrier concentration and relaxation time were determined     

Comparative wear performance of titanium based coatings for automotive applications using exhaust gas recirculation

This paper reports tribological characterization of titanium based coatings ion bonded on steel balls for automotive applications using exhaust gas recirculation (EGR). It is well known that lubricating oil drawn from EGR operated engine is contaminated with soot and higher amounts of wear debris compared to non-EGR operated engine. In this study, steel balls coated with TiN, TiAlN and TiCN are investigated in both fresh lubricating oil and EGR stressed oil for a comparative assessment of their wear characteristics in two mediums. Normal load was applied on the samples, tested against a rotating cast iron disk, simulating ring-liner interaction. In each experiment, about one quarter of disk was dipped in the oil (a) to ensure the presence of a thin oil film on the disk-ball interface during the experiment, and (b) to avoid exposure of the worn surface to atmospheric air. The results reveal that the wear rates of the coatings based on the change in the scar diameters of the samples, tested in EGR oil was 2-4 times higher than that of fresh lubricating oil. It was found that despite lowest hardness, TiN coated samples showed smaller scar diameters than TiAlN and TiCN coated samples in both lubricating oil environments. A simple geometric model was used to calculate the thickness of the coating removed as a function of the test duration. Results show that TiN coatings last for 120 min in fresh oil as compared to 30 min in the EGR oil under normal loading, whereas TiAlN and TiCN coating last for 60 and 30 min respectively in fresh oil and wear out in 15 min in EGR oil.     

A simple decision tree-based disturbance monitoring system for VSC-based HVDC transmission link integrating a DFIG wind farm

Fault detection and classification is a key challenge for the protection of High Voltage DC (HVDC) transmission lines. In this paper, the Teager–Kaiser Energy Operator (TKEO) algorithm associated with a decision tree-based fault classi f ier is proposed to detect and classify various DC faults. The Change Identification Filter is applied to the average and differential current components, to detect the first instant of fault occurrence (above threshold) and register a Change Identified Point (CIP). Further, if a CIP is registered for a positive or negative line, only three samples of currents (i.e., CIP and each side of CIP) are sent to the proposed TKEO algorithm, which produces their respective 8 indices through which the, fault can be detected along with its classification. The new approach enables quicker detection allowing utility grids to be restored as soon as possible. This novel approach also reduces computing complexity and the time required to identify faults with classification. The importance and accuracy of the proposed scheme are also thor oughly tested and compared with other methods for various faults on HVDC transmission lines.     

Irradiation of large area Mylar membrane and characterization of nuclear track filter

Ion irradiation of Si⁸⁺ ion beam of 100 MeV was scattered by a gold foil on a Mylar membrane of 25 Μm thickness in the form of film roll (width, 12.5 cm and length, 400 cm) at the Nuclear Science Centre, New Delhi. The characterization of etched nuclear tracks was carried out by gas permeation measurements. The samples cut from the film roll of required size for permeability measurements were etched in a controlled manner in a constant temperature bath of 6N NaOH solution. The opening of the conical etched tracks was characterized by hydrogen gas permeation.     

In Situ Confocal Raman Mapping Study of a Single Ti-Assisted ZnO Nanowire

In this work, we succeeded in preparing in-plane zinc oxide nanowires using a Ti-grid assisted by the chemical vapor deposition method. Optical spatial mapping of the Confocal Raman spectra was used to investigate the phonon and geometric properties of a single ZnO nanowire. The local optical results reveal a red shift in the non-polar E₂ high frequency mode and width broadening along the growth direction, reflecting quantum-confinement in the radial direction.     

Mitotic Diversity in Homeostatic Human Interfollicular Epidermis

Despite decades of skin research, regulation of proliferation and homeostasis in human epidermis is still insufficiently understood. To address the role of mitoses in tissue regulation, we utilized human long-term skin equivalents and systematically assessed mitoses during early epidermal development and long-term epidermal regeneration. We now demonstrate four different orientations: (1) horizontal, i.e., parallel to the basement membrane (BM) and suggestive of symmetric divisions; (2) oblique with an angle of 45°–70°; or (3) perpendicular, suggestive of asymmetric division. In addition, we demonstrate a fourth substantial fraction of suprabasal mitoses, many of which are committed to differentiation (Keratin K10-positive). As verified also for normal human skin, this spatial mitotic organization is part of the regulatory program of human epidermal tissue homeostasis. As a potential marker for asymmetric division, we investigated for Numb and found that it was evenly spread in almost all undifferentiated keratinocytes, but indeed asymmetrically distributed in some mitoses and particularly frequent under differentiation-repressing low-calcium conditions. Numb deletion (stable knockdown by CRISPR/Cas9), however, did not affect proliferation, neither in a three-day follow up study by life cell imaging nor during a 14-day culture period, suggesting that Numb is not essential for the general control of keratinocyte division.