Continuous microwave assisted flow synthesis and characterization of calcium deficient hydroxyapatite nanorods

Synthetic calcium deficient hydroxyapatite (CDHA) nanorods (<100?nm) were rapidly prepared with the help of a new continuous microwave assisted flow synthesis (CMFS) reactor in 5?min only from aqueous solution of calcium hydroxide and orthophosphoric acid at pH 8.5. The effect of various reaction parameters like, pH, concentration, temperature, residence time, degree of crystallinity and particle surface area were studied in detail. The phase purity, particle size and morphology of the powder samples were characterised by techniques such as X-ray diffraction analysis, transmission electron microscopy, scanning electron microscopy and FTIR and Raman spectroscopy. With the help of X-ray photoelectron spectroscopy, the chemical analysis was completed. Measurements were taken into account to estimate the particle size following the dynamic light scattering. The results showed that the employed synthesis procedure offered an efficient and economical route to achieve high quality nano-sized products with suitable size and low level of impurities.     

Structural,magnetic and microwave absorption characteristics of BaCoxMnxTi2xFe12 − 4xO19

The effect of Mn⁺²Co⁺²Ti⁺⁴ substitution on microwave absorption has been studied for BaCo_xMn_xTi_2xFe_12 ? 4xO₁₉ ferrite–acrylic resin composites, where x varies from 0.3 to 0.5 in steps of 0.1, in frequency range from 12 to 20 GHz. X-ray diffraction (XRD), scanning electron microscope (SEM), vibrating sample magnetometer, and vector network analyzer were used to analyze the structures, electromagnetic and microwave absorption properties. The results showed that, the magnetoplumbite structures for all samples have been formed. Based on microwave measurement on reflectivity, BaCo_xMn_xTi_2xFe_12 ? 4xO₁₉ may be a good candidate for electromagnetic compatibility and other practical applications at high frequency.     

Designing a cellular manufacturing system considering decision style,skill and job security by NSGA-II and response surface methodology

Cell formation is a traditional problem in cellular manufacturing systems that concerns the allocation of parts, operators and machines to the cells. This paper presents a new mathematical programming model for cell formation in which operators’ personality and decision-making styles, skill in working with machines, and also job security are incorporated simultaneously. The model involves the following five objectives: (1) minimising costs of adding new machines to and removing machines from the cells at the beginning of each period, (2) minimising total cost of material handling, (3) maximising job security, (4) minimising inconsistency of operators’ decision styles in cells and (5) minimising cost of suitable skill. On account of the NP-hard nature of the proposed model, NSGA-II as a powerful meta-heuristic approach is used for solving large-sized problems. Furthermore, response surface methodology (RSM) is used for tuning the parameters. Lastly, MOPSO and two scalarization methods are employed for validation of the results obtained. To the best of our knowledge, this is the first study that presents a multi-objective mathematical model for cell formation problem considering operators’ personality and skill, addition and removal of machines and job security.     

通过双级固溶热处理制备新型高强Al−10.5Si−3.4Cu−0.2Mg合金

通过析出硬化提高Al?Si?Cu合金的力学性能.这些合金对时效硬化的反应非常缓慢.为了解决这一问题,在Al?10.5Si?3.4Cu合金中分别加入0.2％、0.4％和0.7％(质量分数)的镁.该新型合金在固溶处理阶段经过两种不同的析出硬化过程.结果表明,添加不同含量的镁可加速该合金对时效处理的响应,提高其硬度和强度.双...     

A comparison of Zayandehrood River water values for agriculture and the environment

River water management is challenging not only since they are open systems with changing physical structures, but also because the water values are mostly unknown over varied sectors. If policymakers grasp water values, water management will be more efficient. This research intends to examine the values of water in agriculture, which receives the most substantial portion of water resources, with the values of water in the environment in Isfahan located in the Zayandehrood River basin of Iran. The consequences of contingent valuation and production function methods revealed that per cubic metre value of water is 13 times higher in the environment than agriculture. The government should reconsider the higher value of the environment despite it is a non‐market value. The contingent valuation model additionally proved that women exhibited 21% more willingness to pay than men in order to protect the environment; however, they are paid less by 36%.     

Light microscopy of Pakistani Berberis leaf cuticles and its taxonomic implications

Taxonomy of the genus Berberis is quite complex, due to overlapping morphological characters, making it very difficult to differentiate the species within the genus. In order to resolve this taxonomic complexity, the foliar anatomy of 10 Berberis L. species was carried out, for the first time from Pakistan, using light microscopy (LM). Significant variation in terms of epidermal cells shape, size, cell wall pattern, and stomata type was observed. B. baluchistanica has the largest epidermal cells, Adaxial: length = 45–(53.9 ± 3.6)–62.5 μm; and width = 22.5–(26.3 ± 1.3)–30 μm; Abaxial: length = 37.5–(43.25 ± 2.5)–50 μm; and width = 20–(22.6 ± 0.8)–25. The highest number of stomata was observed in B. glaucocarpa as 62 on the abaxial surface while the lowest number of stomata was recorded in B. baluchistanica as 8 on the adaxial surface. Of 10 investigated species, 6 possess anomocytic type stomata, while 2 species that is, B. aitchisonii and B. parkeriana have both anomocytic and anisocytic stomata while B. baluchistanica and B. calliobotrys have only paracytic type stomata. The highest number of cells per unit area was present on the adaxial surface of B. calliobotrys ranging from 245–(252.4)–260 followed by B. parkeriana with 209–(227.8)–250 on the abaxial surface. Stomatal index (SI) also varied considerably and was the lowest (2.6) percentage in B. baluchistanica and highest (31.9) percentage in B. kunawurensis. A taxonomic key based on micro‐morphological characters is provided for species identification.     

Modeling metallurgical responses of coal Tri-Flo separators by a novel BNN:a "Conscious-Lab" development

Tri-flo cyclone,as a dense-medium separation device,is one of the most typical environmentally friendly industrial techniques in the coal washery plants.Surpris...     

Polymer Membrane Electrodes for Sensitive Potentiometric Determination of β-blockers

ABSTRACT

The construction of PVC matrix-type β-blockers (sotalol, carvedilol, and betaxolol) ion selective electrodes and their use for direct potentiometry of their respective species are described. The proposed sensors are based on the complex ion associates of β-blockers with tungstophosphate (TP) and Ammonium Reineckate (Rein) ionophoris in poly vinyl chloride membrane (PVC) with Dioctylphthalate (DOP) plasticizer. The four electrodes (Beta-TP), (Sota-TP), (Carve-TP), and (Cave-Rein) show stable potential response with near Nernstian slope of 50.8, 33.7, 32.35, and 33 mv per decade, range of concentration 10?2–10?7 M β-blockers. Selectivity coefficients data obtained for 11 different organic and inorganic ions are presented. The electrodes have fast response time (30 and 40 s) and were used over wide range of pH 4.5–8.5. Validation of the method according to the quality assurance standers shows suitability of proposed sensors for use in the quality control assessment of these drugs. The results obtained for the determination of β-blockers with the proposed electrodes show average recoveries of 100.78% and a mean standard deviation of ±1.2. The nominal are obtained. The data agree well with those obtained by standard methods.     

Locality‐Conscious Nested‐Loops Parallelization

To speed up data‐intensive programs, two complementary techniques, namely nested loops parallelization and data locality optimization, should be considered. Effective parallelization techniques distribute the computation and necessary data across different processors, whereas data locality places data on the same processor. Therefore, locality and parallelization may demand different loop transformations. As such, an integrated approach that combines these two can generate much better results than each individual approach. This paper proposes a unified approach that integrates these two techniques to obtain an appropriate loop transformation. Applying this transformation results in coarse grain parallelism through exploiting the largest possible groups of outer permutable loops in addition to data locality through dependence satisfaction at inner loops. These groups can be further tiled to improve data locality through exploiting data reuse in multiple dimensions.     

Multiscale analysis of viscoelastic laminated composite plates using generalized differential quadrature

In this paper, a laminated composite plate is analyzed using a multiscale method. At first, material properties of a lamina are obtained using an analytical micromechanical approach called simplified unit cell method (SUCM), and then in structural level, the generalized differential quadrature method (GDQM) is used to analyze a laminated composite plate. By means of the Boltzmann superposition principle, the viscoelastic behavior of the matrix is obtained. The Prony series is considered to define the compliance of matrix. To verify the results, graphiteT300/epoxy5208 composite material is analyzed and the results are compared with existing experimental data. The multiscale algorithm includes obtaining overall properties of the composite by SUCM; then, these properties are used to define the bending stiffness. Governing equations of motion of laminated composite plate are solved via GDQM and Newton–Raphson method. Variations of stresses and displacements versus time and volume fraction of the fibers are shown for laminated composite plates with different boundary conditions.