Effects of Er:YAG laser on bond strength of self‐etching adhesives to caries‐affected dentin

The erbium:yttrium–aluminum–garnet (Er:YAG) laser may be effective the bond strength of adhesive systems on dentine surfaces, the chemical composition and aggressiveness of adhesive systems in clinical practice. The purpose of this study was to evaluate the effects of the Er:YAG laser system with the bonding ability of two different self‐etching adhesives to caries‐affected dentine in primary molars. Ninety mid‐coronal flat dentine surfaces obtained from sound and caries‐affected human primary dentine were treated with an Er:YAG laser or a bur. The prepared surfaces were restored with an adhesive system (Xeno V; Clearfil S³) and a compomer (Dyract Extra). The restored teeth were sectioned with a low‐speed saw and 162 samples were obtained. The bond strength of the adhesive systems was tested using the micro‐tensile test method. The data were statistically analyzed. A restored tooth in each group was processed for scanning electron microscopy evaluation. The values of the highest bond strength were obtained from the Clearfil S³‐Er:YAG laser‐sound dentine group in all groups. (24.57 ± 7.27 MPa) (P > 0.05). The values of the lowest bond strength were obtained from the Xeno V‐Er:YAG laser‐sound dentine group in all groups (11.01 ± 3.89 MPa). It was determined that the Clearfil S³ increased the bond strength on the surface applied with Er:YAG laser according to the Xeno V. Microsc. Res. Tech. 77:282–288, 2014. © 2014 Wiley Periodicals, Inc.     

Oxidative DNA damage correlates with carotid artery atherosclerosis in hemodialysis patients

Oxidative stress is accepted as a nonclassical cardiovascular risk factor in chronic renal failure patients. The aim of this study was to evaluate the relation between oxidative DNA damage (8‐hydroxy‐2′‐deoxyguanosine/deoxyguanosine [8‐OHdG/dG] ratio), oxidative stress biomarkers, antioxidant enzymes, and carotid artery intima‐media thickness (CIMT) in hemodialysis (HD) patients. Forty chronic HD patients without known atherosclerotic disease and 48 age‐ and sex‐matched healthy individuals were included in the study. Plasma malondialdehyde (MDA) levels and 8‐OHdG/dG ratio were determined as oxidative stress markers. Superoxide dismutase (SOD) and glutathione peroxidase (GPx) activities were measured as antioxidants. CIMT was assessed by carotid artery ultrasonography. 8‐OHdG/dG ratios and MDA levels were higher; SOD and GPx activities were lower in HD patients compared to controls. HD patients had significantly higher CIMT compared to controls (0.61 ± 0.08 vs. 0.42 ± 0.05, p < 0.001). There was a significant positive correlation between CIMT and 8‐OHdG/dG ratio (r = 0.57, p < 0.01) and MDA levels (r = 0.41, p < 0.01), while there was a significant negative correlation between CIMT and SOD (r = ?0.47, p < 0.01) and GPx levels (r = ?0.62, p < 0.01). It is firstly demonstrated that CIMT is positively correlated with oxidative DNA damage in HD patients without known atherosclerotic disease.     

A simple method to estimate phosphorus mobilization in hemodialysis using only predialytic and postdialytic blood samples

We have recently developed a pseudo one-compartment model to describe intradialytic and postdialytic rebound kinetics of plasma phosphorus. In this model, individual patient differences in phosphorus kinetics were characterized by a single parameter; the phosphorus mobilization clearance (K(M) ). In this work, we propose a simple method to estimate K(M) from predialytic and postdialytic plasma phosphorus concentrations. Clinical data were collected from 22 chronic hemodialysis patients that underwent a 4-hour treatment session. A simple algebraic equation was derived from the pseudo one-compartment model to determine K(M) from predialytic and postdialytic plasma phosphorus concentrations. K(M) values computed using this equation were compared with values obtained from nonlinear regression of the full kinetic model to frequent intradialytic and postdialytic measurements of plasma phosphorus concentrations. There was good agreement between K(M) values (concordance correlation coefficient of 0.94) obtained from the simple method (105?±?52?mL/min, mean?±?SD) and from the full model (99?±?47?mL/min). The 95% confidence interval for the difference between estimated K(M) values was -26 to 36?mL/min. The proposed simple method requires the use of only predialytic and postdialytic blood samples to estimate patient specific K(M) ; this approach may allow easy clinical evaluation of phosphorus kinetics in hemodialysis patients.     

Synthesis and evaluation of tetra(2,7-octadienyl) titanate as a reactive diluent for air-drying alkyd paints

Environmental regulations are forcing the reformulation of many decorative and protective coatings systems. In particular, air-drying solventborne alkyd paints need to meet increasingly stringent emission limits and often must be reformulated with suitable exempt solvents or reactive diluents to achieve volatile organic compound (VOC) reduction. In the research summarized in this article, a new reactive diluent, tetra(2,7-octadienyl) titanate, was synthesized and evaluated in alkyd formulations for VOC reduction and property enhancement. A soy-based long-oil alkyd resin; a soy-based high-solids, long-oil alkyd resin; and a linseed-based, high-solids long-oil alkyd resin were evaluated in combination with the new reactive diluent at weight percentages ranging from 10% to 50%. Characterization included measuring viscosity, film dry times, and film performance of the reactive diluent formulations in comparison to neat alkyd resins used as control. The tetra(2,7-octadienyl) titanate formulations consistently exhibited reduced viscosities and dry times as a function of concentration. The resulting films were harder and more thoroughly cured than the control systems.     

Optimization of some parameters of stirred mill for ultra-fine grinding of refractory Au/Ag ores

In this study, optimization of some parameters of stirred mill on ultra-fine grinding of refractory Au/Ag ores was performed. A three-level Box-Behnken design combining a response surface methodology (RSM) with quadratic programming (QP) was employed for modelling and optimization of some operating parameters in ultra-fine grinding. Grinding tests were carried out in a laboratory scale pin-type vertical stirred mill. The relationship between the response, i.e. d₈₀ size, and four grinding parameters, i.e. ball diameter, grinding time, ball charge ratio and stirrer revolution was presented as empirical model equations. Analysis of variance showed a high coefficient of determination value (R² = 0.9698), thus ensuring a satisfactory of the second-order regression model with the experimental data.The model equations were then optimized using the quadratic programming method to minimize for d₈₀ size within the experimental range studied. The optimum conditions were found to be 1.61 mm for ball diameter, 11.50 min for grinding time, 80% for ball charge ratio and 745 rpm for stirrer revolution for this grinding process.In order to verify the improvement of grinding performance using the optimal level of control factors three verification experiments were conducted, and the results for d₈₀ was 3.37 μm, which were smaller than those obtained in the initial tests.     

CHARACTERIZATION OF THE STRUCTURAL FEATURES OF OXIDIZED BEYPAZARI LIGNITE USING DECONVOLUTED SOLID STATE 13C NMR SPECTRA

ABSTRACT

The solid state ¹³C NMR method have been used to investigate the structural changes occurred in Beypazari lignite while oxidizing at 150°C in a dynamic air atmosphere. Least squares curve fitting techniques have been used to resolve the overlapping bands in the 0-220 ppm region of the 13_c NMR spectra. Measurements of the relative intensities of the functional groups observed in the oxidized coals were used to follow the progress of air oxidation. Oxidation reactions seemed to decrease the total intensities of both aliphatics and aromatics, though the reduction in aliphatics was more pronounced. The relative intensities of the total aliphatics decreased from 1.0 to 0.9 and 0.6 in the original and lignites oxidized for 12 and 312 hours, respectively. The relative intensities of Ar-C-C in the 130-148 ppm region for the same set of samples were 1.0, 0.9 and 0.8. The least-squares bands resolved in the carbonyl region were at 175 ppm and 190 ppm in the original lignite; at 180 ppm (carboxylic acids), 195 ppm (meta substituted ketones) 210 ppm (di orto substituted ketones) in the lignite oxidized for 12 hours and at 170 ppm (esters), 180 ppm, 200 ppm (aldehydes) and 210 ppm in the lignite oxidized for 312 hr. Carbonyl intensity increased from 1.0 in the original lignite to 2.3 and 3.3 in the oxidized lignites. The intensity of aromatic ethers increased from 1.0 in the original lignite to 1.9 and 1.6 for the oxidized samples. The mechanism of oxidation ether. Aldehydes are easily oxidized to carboxylic acids in the presence of air by the free radical formation of a peroxy acid. The carboxylic acid formed by disproportionation reactions between the peroxy acid and aldehydes might combine with phenols to produce esters as it was observed in the present work. The presence of high free radical concentration in the oxidation atmosphere probably caused to abstract hydrogen atoms from the aromatic structures thus degrading aromatics to produce hydroperoxides which acted later as it was described above. The gradual degradation of aromatic structures observed in the present study indicated that the oxidation reactions of the aromatic rings should less probable when compared to the oxidation of aliphatic structures.     

EXTRACTION OF TITANIUM(IV) FROM AQUEOUS HYDROCHLORIC ACID SOLUTIONS INTO ALAMINE 336-M-XYLENE MIXTURES

Extraction of Ti(IV) from its aqueous hydrochloric acid solutions into organic Alamine 336-m-xylene systems was investigated. Extraction experiments were conducted with three different initial metal concentrations of 1, 3, and 6 mg/mL, each at three acidic molarities of 1, 5, and 10 M. It was observed that the extractability of Ti(IV) increases with increasing acidic molarities. Alamine 336 diluted with m-xylene was found to be a suitable extractant for Ti(IV) across this acidic range. In parallel, a mathematical model was developed to correlate metal extractability and Alamine 336 volume content. Optimal Alamine 336 contents were estimated for single-stage extraction.     

Non-isothermal kinetics of pyrolysis of Turkish petroleum pitches

Non-isothermal thermogravimetric data of two Turkish petroleum pitches were used to evaluate kinetic parameters of pyrolysis reactions. The article reports the application of Ozawa–Flynn–Wall model to deal with non-isothermal TG data for the evaluation of the activation energy corresponding to the pyrolysis of two different petroleum pitches. Non-isothermal kinetic studies of pyrolysis of the pitches based on the TGA measurements at different heating rates resulted that average activation energy of pyrolysis of pitch B (213 kJ/mol) was higher than that of average activation energy of pitch A (186 kJ/mol). Reaction orders of pitch A and pitch B were calculated as 0.6 and 0.9, respectively.