Novel soluble fluorinated poly(ether imide)s with different pendant groups: Synthesis,thermal, dielectric,and optical properties

Three types of new bis(ether dianhydride) monomers, [4,4′‐(2‐(3′‐methylphenyl)‐1,4‐phenylenedioxy)‐diphthalic anhydride (4a)], [4,4′‐(2‐(3′‐trifluoromethylphenyl)‐1,4‐phenylenedioxy)‐diphthalic anhydride (4b)], and [4,4′‐(2‐(3′,5′‐ditrifluoromethylphenyl)‐1,4‐phenylenedioxy)‐diphthalic anhydride (4c)] were prepared via a multistep reaction sequence. Three series of soluble poly(ether imide)s (PEIs) were prepared from the obtained dianhydrides by a two‐step chemical imidization method. Experimental results indicated that all the PEIs had glass transition temperature in the range of 200–230 °C and the temperature of 5% weight loss in the range of 520–590 °C under nitrogen. The PEIs showed excellent solubility in a variety of organic solvents due to introduction of the bulky pendant groups and were capable of forming tough films. The casting films of PEIs (80–91 μm in thickness) had tensile strengths in the range from 88 to 117 MPa, tensile modulus from 2.14 to 2.47 GPa, and elongation at break from 15 to 27%. The casting films showed UV‐Vis absorption edges at 357–377 nm, low dielectric constants of 2.73–2.82, and water uptakes lower than 0.66 wt %. The spin‐coated films of PEIs presented a minimum birefringence value as low as 0.0122 at 650 nm and low optical absorption at the optical communication wavelengths of 1310 and 1550 nm. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3281–3289, 2010     

任意挠曲输液管道瞬时变分原理

给出了弹性系统瞬时势能泛函的一般表达式，得到了其关于任意挠曲输液管道的具体表达式，根据瞬时最小势能原理建立了该结构的有限元动力方程，并首次推导出其离心力载荷公式，讨论了管道结构静平衡位置的发散流速的确定，最后，用简单的实验结果对理论分析作了验证。     

Pd-catalyzed carbonylation of diazo compounds at atmospheric pressure: a catalytic approach to ketenes

The carbonylation of carbenes through catalytic cycles is highly desirable due to the importance of ketene-mediated reactions in organic synthesis. In this investigation, a highly efficient and mild catalytic approach toward ketene intermediates has been developed based on Pd-catalyzed carbonylation of diazo compounds with CO. When α-diazocarbonyl compounds or N-tosylhydrazone salts are heated in the presence of a palladium catalyst under atmospheric pressure of CO, ketene intermediates are formed in situ, where they undergo further reactions with various nucleophiles such as alcohols, amines, or imines. The Pd-catalyzed tandem carbonylation-Staudinger cycloaddition gives β-lactam derivatives in good yields with excellent trans diastereoselectivity. The results from DFT calculation on the reaction mechanism suggest that Pd is involved in the [2 + 2] cycloaddition process and affects the diastereoselectivity of the β-lactam products by assisting isomerization of the addition intermediate. On the other hand, the acylketenes generated from the Pd-catalyzed carbonylation of α-diazoketones react with imines in a formal [4 + 2] cycloaddition manner to afford 1,3-dioxin-4-one derivatives. This straightforward carbonylation provides a new approach toward highly efficient catalytic generation of ketene species under mild conditions.     

基于液相色谱-质谱联用技术的代谢组学方法用于中药通心络和人参对过度疲劳大鼠干预作用的评价

用代谢组学方法评价了中药通心络和人参对过度疲劳大鼠的干预作用.通过构造大鼠过度疲劳模型,并分别用通心络和人参进行干预,采用快速液相色谱-离子阱飞行时间质谱(UFLC-IT-TOF-MS)获取大鼠血浆代谢轮廓,并用正交偏最小二乘法(OPLS)进行多变量统计分析,分别找出用于区分通心络和人参干预组大鼠同正常对照大鼠、过度疲...     

Solvent-free cross-dehydrogenative coupling reactions under high speed ball-milling conditions applied to the synthesis of functionalized tetrahydroisoquinolines

Solvent-free reaction using a high-speed ball milling technique has been first applied to cross-dehydrogenative coupling (CDC) reactions between tetrahydroisoquinolines and three types of pronucleophiles such as nitroalkanes, alkynes, and indoles. All coupling products were obtained in good yields at short reaction times (no more than 40 min). When alkynes and indoles were used as pronucleophile, the reactions can be catalyzed efficiently by recoverable copper balls without any additional metal catalyst.     

Constrained large-eddy simulation of turbulent flow over inhomogeneous rough surfaces

In this work we extend the method of the constrained large-eddy simulation(CLES) to simulate the turbulent flow over inhomogeneous rough walls. In the original concept of CLES, the subgrid-scale(SGS) stress is constrained so that the mean part and the fluctuation part of the SGS stress can be modelled separately to improve the accuracy of the simulation result. Here in the simulation of the rough-wall flows, we propose to interpret the extra stress terms in the CLES formulation as the roughness-induced stress so that the roughness inhomogeneity can be incorporated by modifying the formulation of the constrained SGS stress. This is examined with the simulations of the channel flow with the spanwise alternating high/low roughness strips. Then the CLES method is employed to investigate the temporal response of the turbulence to the change of the wall condition from rough to smooth. We demonstrate that the temporal development of the internal boundary layer is just similar to that in a spatial rough-tosmooth transition process, and the spanwise roughness inhomogeneity has little impact on the transition process.