Diastereoselective inter- and intramolecular pinacol coupling of aldehydes promoted by monomeric titanocene(II) complex Cp(2)TiPh

A monomeric titanocene(III) derivative, Cp(2)TiPh, effectively promoted the pinacol coupling of both an aromatic aldehyde, benzaldehyde, and an aliphatic aldehyde, 3-phenylpropionaldehyde. The same reactive complex was successfully generated by a catalytic amount of a precursor, Cp(2)Ti(Ph)Cl, and its stoichiometric amount of Zn. The Cp(2)TiPh-catalyzed pinacol coupling of benzaldehyde derivatives and aliphatic aldehydes afforded the corresponding 1,2-diols in high yields with moderate to good threo-selectivity. On the other hand, Cp(2)TiPh-catalyzed pinacol cyclization of dials gave cyclic 1,2-diols with excellent diastereoselectivity. The extension of this protocol to chiral dials demonstrated that the phenyltitanium complex catalytically transmitted an axial chirality or a central chirality of the starting dials to the central chirality of the resultant 1,2-diols.     

Nuclear magnetic resonance study of exchanging systems : The line shape analysis of the inversion of 9,10-dihydro-4,5-dimethylphenanthrene by the density matrix method

9,10-Dihydro-4,5-dimethylphenanthrene has two rotational isomers around the pivot bond. This compound shows a complex signal pattern of an AA′BB′ type for the four methylene protons in the NMR spectrum. The inversion process is analysed using the density matrix method, and at various temperatures the calculated line shapes are fitted to the observed spectra to obtain the life-time τ of the inversion. From the logarithmic plot of the life time versus 1/T, the kinetic parameters of this intramolecular inversion process are obtained as follows: E_a = 25·3 ± 1·0 Kcal/mole ΔG3 = 24°1 ± 1·0 Kcal/mole at 25·0° ΔH3 = 24·7 ± 1·0 Kcal/mole ΔS3 = 2·1 ± 0·8 e.u.     

Use of transition elements to enhance sensitivity for selenium determination by graphite-furnace atomic-absorption spectrophotometry combined with solvent extraction with the APDC-MIBK system

A microanalytical method for the measurement of selenium in waters and biological materials by a flameless atomic-absorption technique has been developed. The ammonium pyrrolidinedithiocarbamate-methyl isobutyl ketone extraction system is used for separation from interfering materials such as large amounts of alkali and alkaline earth metal salts and mineral acids. The atomic-absorption sensitivity for selenium is found to be enhanced to a large extent by co-extraction of some transition metal ions. Copper(II) has been used successfully as such an additive to diminish the volatility of selenium in the graphite furnace during the ashing step of the atomization cycle. When the aqueous phase/organic solvent volume ratio is 5 and the volume injected into the graphite furnace is 20 mul, the sensitivity for selenium is 0.3 ng/ml for 1% absorption. The relative standard deviation is ca. 2%. Interference by other metal ions is prevented by masking with EDTA. The method has been applied satisfactorily for the determination of minute amounts of selenium in waters and various biological materials.     

Radioisotopes of thirteen elements in intertidal coastal and estuarine sediments in the Irish Sea

A survey has been carried out of⁴⁰K,⁶⁰Co,⁹⁹Tc,¹⁰⁶Ru,¹²⁵Sb,¹²⁹I,¹³⁴Cs,¹³⁷Cs,¹⁵⁴Eu,²²⁶Ra,²²⁸Ra,²³⁷Np,²³⁸Pu,^239,240Pu,²⁴¹Pu,²⁴¹Am,²⁴²Cm, and^243,244Cm activities in sediments from the Irish Sea. Several of these radionuclides were measured independently at two separate laboratories to enable the intercomparison of the results produced. The comprehensive data set generated allows the present spatial distributions of these radionuclides in coastal sediments to be examined in relation to sediment textural characteristics and by comparison with earlier survey, enables the temporal trends in their activities to be determined. In general all artificial radionuclides showed lower activities in sediments in response to falling discharges from Sellafield and relationships with either grain size, distance from Sellafield or both. Isotope ratios were similar to cumulative weighted activity ratios rather than present day values due to sediment mixing. Pu levels supplied evidence for the lag in response of sediment deposits with increasing distance from Sellafield due to sediment transport.     

Determination of environmental actinide nuclides and210Pb(210Po) by low-energy photon spectrometry with alpha-spectrometry

Low-energy photon spectrometry with -spectrometry was used to determine the environmental concentrations of low-level actinides and other nuclides, especially²¹⁰Pb and²¹⁰Po. The isotopic ratio of²⁴⁰Pu/²³⁹Pu was successfully determined by measuring L_x-ray/-ray counting ratio. A reliable method has been developed for the determination of extremely low-level²³⁷Np global fallout in environmental samples. The non-destructive determination by Ge-LEPS for natural²¹⁰Pb in various samples (tobacco leaves, commercially available tobacco, etc.) was also carried out with the determination of²¹⁰Po by -spectrometry using²⁰⁹Po as a yield tracer.     

One-pot synthesis of phenol and cyclohexanone from cyclohexylbenzene catalyzed by N-hydroxyphthalimide (NHPI)

Synthesis of phenol and cyclohexanone in one pot was examined by means of the NHPI-catalyzed aerobic oxidation of cyclohexylbenzene. The aerobic oxidation of cyclohexylbenzene catalyzed by NHPI followed by treatment with sulfuric acid afforded phenol and cyclohexanone in good selectivities. Thus, the reaction of cyclohexylbenzene under atmospheric dioxygen (1 atm) by NHPI at 100 °C for 3 h followed by treatment with 0.3 M sulfuric acid at room temperature for 2 h resulted in phenol and cyclohexanone in 96 and 91% selectivity, respectively, at 25% conversion. This method was successfully extended to the one-pot synthesis of 4-hydroxyacetophenone and cyclohexanone.     

Catalytic, highly enantio- and diastereoselective pinacol coupling reaction with a new tethered bis(8-quinolinolato) ligand

A new class of chiral ligand, tethered bis(8-quinolinol) (TBOxH), is developed. Its chromium complex, TBOxCrCl (3 mol %), effectively catalyzes the pinacol coupling reaction of aromatic aldehydes at room temperature with high yield (up to 94%), high diastereoselectivity (up to dl:meso = 98:2), and high enantioselectivity (up to 98%). The scope of the present method turns out not to be limited to aromatic aldehyde derivatives, as cyclohexanecarboxaldehyde undergoes pinacolization as well (44% yield, dl:meso = 93:7, 84% ee). The method provides an efficient access to enantioenriched 1,2-diols.     

Cation binding properties of crown ether-modified polyethylenimines

Crown ether-modified polyethylenimines (PEI-CR) were prepared to elucidate their cation binding efficiency and selectivity by liquid-liquid and solid-liquid extraction methods. With alkali metal cations it was found that polyethylenimines containing benzo-15-crown-5 moieties (Ia and Ib) extracted all cations examined more efficiently than their monomeric analogs, especially in the cases of K⁺ and Rb⁺ cations. The solid-liquid extraction revealed clearly that the polymers complexed with K⁺ and Rb⁺ cations according to a 1:2 cation-to-crown stoichiometry. The high selectivities of the polymers for K⁺ and Rb⁺ were interpreted in terms of the favourable conformation of the polymer chain for the formation of intramolecular 1:2 complexes. On the contrary, these polymers bound alkali earth cations less effectively with low selectivities.     

DESIGN AND PERFORMANCE OF THE OKAZAKI LARGE SPECTROGRAPH FOR PHOTOBIOLOGICAL RESEARCH

A computer-operated spectrograph was recently built at Okazaki, Japan. Different specimens can be placed on a horseshoe-shaped focal curve (10 m long) covering a wavelength range of 250 to 1000 nm so they can be irradiated simultaneously. The linear dispersion is about 0.8 nm/cm. The photon fluence rate on the focal curve is 5 x 10¹⁵. photons x cm^-2 x s^-1 at 300nm and 1 x 10¹⁶ photons x cm^-2 x s^-1 at 600 and at 900 nm. The spectral half width is 5.5 nm or less on the focal curve. The stray light content is about 10^-5 of the main peak at the peak wavelength ± 100 nm. Specimens are set in microcomputer-controlled threshold boxes so that wavelengths, photon fluence rates, photon fluences and timing of irradiations are controlled automatically according to a pre-programmed schedule. An optical fiber system is also provided for remote irradiations.     

Ideal nonideality in adsorption of 2-aminoethanethiol and 2-mercaptoethane sulfonic acid to form electrostatically stabilized binary self-assembled monolayers on Au(111)

In formation of binary self-assembled monolayers (SAMs) composed of 2-aminoethanethiol (AET) and 2-mercaptoethane sulfonic acid (MES) by adsorption from an ethanol solution on Au(111), the adsorption shows nearly ideal nonideality in that the surface ratio of MES to AET in the SAM is unity and does not depend on the mixing ratio of MES to AET in the bathing ethanol solution used for preparing SAMs, chi(soln)MES, over the wide range of chi(soln)MES between 0.01 and 0.95. X-ray photoelectron spectroscopy confirms that at least 80% of AET molecules adsorbed are protonated in this range of chi(soln)MES, indicating that the electrostatic interaction between positively charged AET and negatively charged MES is responsible to the observed nonideality. Correspondingly, there appears only one cathodic peak in a linear-sweep voltammogram of the reductive desorption of the SAM, having a narrow full width at half-maximum of about 20 mV. This suggests the presence of strong lateral attractive interaction between the adsorbed thiolates.