Conductances of some electrolytes in 2-methylpyridine-N-oxide at 55°C

Conductance measurements for fifteen uni-univalent salts in 2-methylpyridine-N-oxide (2-MPO) were made over the concentration range of 2–120×10^–4 mol-dm^–3 at 55°C. All conductance data were evaluated by the Lee-Wheaton equation. The results indicate that all of the salts studied are slightly associated in 2-MPO, which is, nevertheless, a reasonably good ionizing solvent compared to other solvents having a similar value for the dielectric constant. The tetraalkylammonium halides are weaker electrolytes than the tetraphenylborate salts in 2-MPO. Ionic limiting molar conductances were obtained by using as a reference electrolyte tris(iso-pentyl)butylammonium tetraphenylborate. Anions appear to be poorly solvated in this solvent but certain cations, particularly Na⁺ and K⁺, show evidence of specific ion-solvent interaction.This study was presented, in part, at the 6th Central Regional Meeting of the American Chemical Society, Detroit, Michigan, April 1974.     

Photochemistry of Isothiocoumarin (= 1H-[2]benzothiopyran-1-one)

Irradiation (λ = 350 nm) of 1H-[2]benzothiopyran-1-one ( 2 ) in the solid state affords selectively and in good yield 6aα, 6bα, 12bα, 12cα -tetrahydrocyclobuta[1, 2-c:4, 3-c′]bis([2]benzothiopyran)-5, 8-dione ( 3 ), the head-to-head (HH) cis-cisoid-cis-cyclodimer of 2 , X-Ray analysis of 2 confirms that this reaction proceeds according to the well-established topochemical principles. The same dimer 3 is obtained in low yields on irradiation of 10⁻¹ M solutions of 2 in either MeOH or MeCN, while no conversion at all is observed in benzene. On irradiation of 2 in MeCN in the presence of tetrachloroethene, the [2 + 2] photocycloadduct 4 is formed in good yield, the conversion 2 → 4 being efficiently quenched by naphthalene. In contrast, no reaction is observed -on irradiation of 2 in the presence of 2, 3-dimethylbut-2-ene, neither in polar nor in apolar solvents.     

The Raman active internal vibrational modes of potassium nitrate

The Raman active internal vibrational modes of single crystal orthorhombic potassium nitrate have been studied in various polarizations. The full multiplet structure predicted by factor group analysis for the v₂ and v₃ regions has been observed for the first time. The expected site group splitting of the v₄ mode was not observed and can be assumed to be less than 0.5 cm^?1.     

Zum Mechanismus der Photochemie des Benzfurazans

Mechanistic studies on the photochemical reactions of benzfurazan . From other works it is known that irradiation of benzfurazan ( 1 ) in methanol gives the carbaminacid-ester 4 , whereas in benzene the azepinederivative 3 is obtained (Scheme 1). The compounds 5–8 (Scheme 2) have been proposed as intermediates. In our investigations we detected and characterized by means of UV.- and IR.-spectroscopy the two species 5 and 8 . Irradiation of 1 with 350 nm light at room temperature in a strongly polar solvent (e.g. H₂O) yields exclusively 5 (Fig. 1) with a quantum yield of 0.48. In non polar solvents (e.g. hexane) 5 isomerizes in a second photochemical step to 8 (quantum yield 0.43) (Fig. 3). Thermally, 5 can be converted back to 1 . The rate constant for this reaction at room temperature is 2 · 10^–5s^–1. The transformation 5 → 8 was also investigated at low temperature. There was no direct evidence for any intermediates of the type oxazirene ( 6 ) or nitrene ( 7 ). However, the formation of azepine 3 upon irradiation of 5 in benzene suggests as intermediate the nitrene 7 which could be converted into 8 in a fast thermal reaction (Scheme 3).     

Influence of the cathodic polarization on the stability of Ti surface in concentrated KOH solutions

The stability of spontaneous thin layers and thin layers formed upon cathodical polarization of Ti in KOH solutions have been studied by potentiostatic and ellipsometric methods. At open circuit potential (OCP) the strongly adherent films, whose thickness depends on the concentration of the KOH solution, were formed. During the cathodic polarization the transformation of these films to weakly adsorbed precipitated layers on the electrode surface was observed. Comparing the theoretically computed curves with the experimental Ψ vs Δ loci measured ellipsometrically, the complex indices of refraction and the thickness of the generated films, from 3.6 to 60 nm in 1 M KOH and from 36 to 105 nm in 5 M KOH (adherent to the electrode surface), were determined. At OCP the rate of film growth increases with increasing the concentration of KOH solution. Cathodic polarizations change the chemical composition and retard the rate of film growth. Based on the ellipsometric and electrochemical data the chemical compositions of the formed films consisted of TiO₂, Ti₂O₃, TiO₂·H₂O, Ti(OH)₃ and TiOOH·nH₂O.     

Fuzzy Symmetries for Linear Molecules and their Molecular Orbitals

In this paper, the fuzzy symmetry of some prototypical linear molecules has been analyzed. The results show that some molecular orbitals (MOs) are less symmetrical but some others are more symmetrical than the molecular skeleton, which the MOs correspond to. The membership functions of space inversion for MOs are closely related to the chemical characteristics of the MOs. Sometimes, although the symmetry of a molecular skeleton is not obvious, however that of some MO is quite obvious. The membership functions of the fuzzy inversion symmetry depend on the choice of the position of the center of inversion. As compared to those of diatomic molecules and linear tri-atomic molecules, the linear polyatomic molecules in which a distinctive fuzzy symmetry of space translation may exist, and thus a significant effect on their properties can be expected.     

Synthesis and characterization of microencapsulated dicyclopentadiene with melamine–formaldehyde resins

Microcapsules containing healing agents have been used to develop the self-healing polymeric composites. These microcapsules must possess special properties such as appropriate strength and stability in surrounding medium. A new series of microcapsules containing dicyclopentadiene (DCPD) with melamine–formaldehyde (MF) resin as shell material were synthesized by in situ polymerization technology. These microcapsules may satisfy the requirements for self-healing polymeric composites. The chemical structure of microcapsule was identified by using Fourier transform infrared (FTIR) spectrometer. The morphology of microcapsule was observed by using optical microscope (OM) and scanning electron microscope. Size distribution and mean diameter of microcapsules were determined with OM. The thermal properties of microcapsules were investigated by using thermogravimetric analysis and differential scanning calorimetry. Additionally, the self-healing efficiency was evaluated. The results indicate that the poly(melamine–formaldehyde) (PMF) microcapsules containing DCPD have been synthesized successfully, and their mean diameters fall in the range of 65.2∼202.0 μm when the adjusting agitation rate varies from 150 to 500 rpm. Increasing the surfactant concentration can decrease the diameters of microcapsules. The prepared microcapsules are thermally stable up to 69 °C. The PMF microcapsules containing DCPD can be applied to polymeric composites to fabricate the self-healing composites.     

Synthesis,crystal structure,electrochemical properties and large optical limiting effect of a novel 3-(E)-ferrocenyl-vinyl-<Emphasis Type="BoldItalic">N</Emphasis>-hexyl carbazole

The novel compound, 3-(E)-ferrocenyl-vinyl-N-hexylcarbazole (FVHC) was first synthesized and fully characterized by elemental analysis, IR, ¹H-NMR, single-crystal X-ray diffraction, ultraviolet (UV) absorption, cyclic voltammograms (CV) and optical limiting (OL) measurements. The result of single crystal X-ray diffraction for the compound reveals that the ferrocenyl and carbazole groups are approximately coplanar, and bridged by double-bond with E configuration, showing that there is a well-delocalized π-electron system in the molecule. The electrochemical investigation indicated that the electron in the FVHC may partially be delocalized over the π-conjugated system and CT process in functionalized carbazole systems. Besides, the compound exhibited strong UV absorption and large optical limiting effect, indicating promising potential applications as useful OL materials.     

Perthio- and perseleno-1,3-butadienes, -but-1-ene-3-ynes,and -[3]-cumulenes: one-step syntheses from 1,4-dilithio-1,3-butadiyne

[reaction: see text] Treatment of 1,4-dilithio-1,3-butadiyne (1) with dichalcogenides RSSR or RSeSeR affords dithio- and diseleno-1,3-butadiynes (2, 3), perthio- and perseleno-[3]-cumulenes (4, 5), perthio- and perseleno-1,3-butadienes (6, 7), and/or perthio- and perseleno-but-1-ene-3-ynes (8, 9). The products can be controlled by stoichiometry and temperature, by the presence or absence of oxygen, and by choice of the "R" group. By X-ray crystallography, hexa(methylthio)-1,3-butadiene is highly twisted, with a torsion angle [Phi(CCCC)] of 84.7 degrees and an elongated C(2)-C(3) distance of 1.484(3) A.     

Carbon nanotube array-based biosensor

Aligned multi-wall carbon nanotubes (MWNT) grown on platinum substrate are used for the development of an amperometric biosensor. The opening and functionalization by oxidation of the nanotube array allows for the efficient immobilization of the model enzyme, glucose oxidase. The carboxylated open-ends of nanotubes are used for the immobilization of the enzymes, while the platinum substrate provides the direct transduction platform for signal monitoring. It is also shown that carbon nanotubes can play a dual role, both as immobilization matrices and as mediators, allowing for the development of a third generation of biosensor systems, with good overall analytical characteristics.