Photodissociation dynamics of pyridine

Photodissociation of pyridine, 2,6-d2-pyridine, and d5-pyridine at 193 and 248 nm was investigated separately using multimass ion imaging techniques. Six dissociation channels were observed at 193 nm, including C5NH5 --> C5NH4 + H (10%) and five ring opening dissociation channels, C5NH5 --> C4H4 + HCN, C5NH5 --> C3H3 + C2NH2, C5NH5 --> C2H4 +C3NH, C5NH5 --> C4NH2 + CH3 (14%), and C5NH5 --> C2H2 + C3NH3. Extensive H and D atom exchanges of 2,6-d2-pyridine prior to dissociation were observed. Photofragment translational energy distributions and dissociation rates indicate that dissociation occurs in the ground electronic state after internal conversion. The dissociation rate of pyridine excited by 248-nm photons was too slow to be measured, and the upper limit of the dissociation rate was estimated to be 2x10(3) s(-1). Comparisons with potential energies obtained from ab initio calculations and dissociation rates obtained from the Rice-Ramsperger-Kassel-Marcus theory have been made.     

IIB族金属二硫代氨基甲酸配合物的合成、表征及热稳定性研究

在甲醇溶液中合成了一系列IIB过渡金属Zn(II), Cd(II)的二羟乙基二硫代氨基甲酸[(EtOH)₂dtc]的配合物, 并对配合物M[(EtOH)₂dtc]₂L [M＝Zn (1), Cd (2), L＝2,2'-联吡啶; M＝Zn (3), Cd (4), L＝邻菲啰啉]进行了红外光谱、元素分析、热重分析表征工作. 热重分析表明配合物1～4中DTC配体比中性配体更易失去, 热分解最终产物为相应的氧化物. 对化合物1, 2做了X-ray单晶衍射分析, 1为单斜晶系, P2₁/c空间群, 晶胞参数a＝0.72146(5) nm, b＝2.61720(18) nm, c＝1.59438(11) nm,b＝97.899(2)°, V＝2.9820(4) nm³, Z＝4, m＝1.133 mm^－1, D_c＝1.297 Mg•m^－3; 2为三斜晶系, P-1空间群, 晶胞参数a＝1.0075(2) nm, b＝1.1580(2) nm, c＝1.1777(2) nm, a＝70.92(3)°, b＝85.71(3)°, γ＝81.02(3)°, V＝1.2822(4) nm³, Z＝2, m＝2.118 mm^－1, D_c＝1.630 Mg•m^－3.     

手性叠氮呋喃酮及其三唑类化合物的合成

合成了手性叠氮2(5H)-呋喃酮化合物(3a～3d);3b与含活泼亚甲基化合物发生偶极环加成反应,合成了带手性丁烯内酯的1,2,3-三唑化合物(8b和8b)。3,7和8的结构经1HNMR,13CNMR,IR和HR-MS表征。探讨了合成反应的机理。     

离子液体介质中FeCl3•6H2O催化下芳香醛与5,5-二甲基-1,3-环己二酮的缩合反应

考察了在离子液体1-正丁基-3-甲基咪唑四氟硼酸盐([bmim][BF₄])介质中, 芳香醛与5,5-二甲基-1,3-环己二酮的缩合反应. 实验结果表明, 在催化量的FeCl₃•6H₂O存在下, 该反应可高产率地生成氧杂蒽二酮类化合物3; 而在TMSCl/FeCl₃•6H₂O复合催化体系的催化下, 则得到氧杂蒽二酮类化合物的开环衍生物4, 反应具有非常好的选择性. 该论文提供的方法操作简单、产率高、选择性好而且对环境友好. 在反应结束后, 所用催化剂及离子液体都很容易回收, 并能有效重复使用.     

微生物法分析天然抗氧化剂性能

建立了微生物抑菌活性纸片试验法，对葛根黄酮、诃子提取物、丹皮酚、竹叶黄酮等4种天然抗氧化剂的抗氧化性能进行了研究。竹叶黄酮、诃子、葛根具有较强的抗单线态氧能力，而丹皮酚抗单线态氧的能力较差。在不同的氧化还原微环境下，天然抗氧化剂可能表现出抗氧化能力，亦可能表现出促氧化能力，二者有着不同的反应机理。微生物抑菌活性纸片法可作为研究较复杂生物环境中抗氧化剂性能的一种简便方法。     

烯丙位氧化的几种方法

综述了近年来烯丙位氧化的研究进展，详细讨论了过渡金属及其络合物、硒化 合物在烯丙位氧化中的应用，并简述了丁基锂方法、固相催化方法、生物氧化方法 和次氯酸钠氧化方法在烯丙位氧化中的应用．     

在肽库中进行小肽筛选的初步研究

以合成六肽ＤＧＧＳＡＡ为模型对在噬菌体肽库中进行小肽筛选做了初步研究。结果表明，含有可形成氢键和离子键残基的小肽能够在噬菌体肽库中进行筛选。并用明显提高了筛选的专一性。     

Temperature-programmed desorption and adsorption of hydrogen on Mo2N

Hydrogen adsorption-desorption over Mo₂N has been studied using a temperature-programmed technique. It is revealed that hydrogen on Mo₂N exhibits very high mobility leading to migration of the surface hydrogen into the sublayer and bulk of the sample or the reverse. The surface hydrogen species are preferentially formed when adsorption is carried out below 573 K. On increasing the adsorption temperature to above 573 K, the quantity of hydrogen species located in the sublayer or/and bulk of the Mo₂N sample increases significantly.     

催化燃烧去除VOCs污染物的最新进展

催化燃烧是目前最有效的处理挥发性有机物(VOCs)技术之一. 本文从催化剂活性组分、催化剂载体、有效组分颗粒大小、水蒸汽的影响及催化燃烧反应中的积碳等几个方面, 对近年来催化燃烧处理VOCs的研究进行了总结. 分析表明: 贵金属催化剂的研究主要着重于选择有效的载体和双组分贵金属催化剂; 非贵金属催化剂的研究主要集中在高活性的过渡金属复合氧化物、钙钛矿和尖晶石型等催化剂的研制, 还有这些活性组分粒径大小及载体对催化燃烧VOCs反应活性的影响;此外, 在实际应用中,水蒸汽和催化剂积碳失活等问题对催化燃烧VOCs的反应也有很大影响. 本文的评述将为选择合适的催化燃烧技术处理VOCs污染物提供一定参考.     

CHARGE-TRANSFER AND ENERGY-TRANSFER IN THE PHOTO-INDUCED COPOLYMERIZATION OF 2-VINYLNAPHTHALENE WITH MALEIC ANHYDRIDE

The initiation mechanism of the copolymerization of 2-vinylnaphthalene with maleic anhydride was studied under irradiation of 365 nm. The excited complex was formed from (1) the local excitation of 2-vinylnaphthalene followed by the charge-transfer interaction with maleic anhydride and (2) the excitation of the ground state charge-transfer complex, and then it collapsed to 1,4-tetramethylene biradical for initiation. A1: 1 alternating copolymer was formed in different monomer feeds. Addition of benzophenone could greatly enhance the rate of copolymerization through energy-transfer mechanism.