Fe analysis by the ferrozine method: Adaptation to FIA towards in situ analysis in hydrothermal environment

The target of this study is the adaptation of the ferrozine method to flow injection analysis (FIA) to perform iron analysis in situ using an in situ chemical analyser in hydrothermal environments. The adaptation of the method to FIA was followed by its optimisation using an experimental design screening method. The goals of the optimisation steps were to decrease the detection limit and to increase the measuring range to cope with the constraints of in situ analysis. The method allows the determination of iron in the mixing zone of hydrothermal fluid, enriched in iron, and seawater. A single manifold gives the possibility to analyse either Fe(II) or ΣFe [Fe(II) + Fe(III)] in situ, or ΣFe in the lab on hydrothermal seawater samples. The measuring range of the method was increased to up to 2000 μM, which is coherent with the study of the chemical environment of communities associated with deep-sea hydrothermal activity. Finally, the method was applied in situ using the chemical analyser Alchimist during the ATOS cruise on hydrothermal vent fields on the Mid Atlantic Ridge.     

Uncatalyzed reaction of silyl ketene acetals with oxalyl chloride: a straightforward preparation of symmetrical pulvinic acids

[reaction: see text] Several natural pulvinic acids were synthesized. Silyl ketene acetals derived from methyl arylacetates (4 equiv) reacted with oxalyl chloride at -78 degrees C, without the need of adding a catalyst. After treatment of the crude diketones with DBU and acidification with hydrochloric acid, symmetrical pulvinic acids methyl esters were obtained. Saponification of the methyl esters afforded the corresponding pulvinic acids in 60-70% overall yields from oxalyl chloride.     

Aggregation states and molecular motion of polymer ultrathin films prepared at the air/water interface

Surface structure and dynamics in three different polymeric ultrathin systems, such as organosilane monolayers, poly(methyl methacrylate) (PMMA) brushes and poly(amido amine) dendrimer monolayers are discussed.     

A bifunctional iminophosphorane squaramide catalyzed enantioselective synthesis of hydroquinazolines via intramolecular aza-Michael reaction to α,β-unsaturated esters

An efficient synthesis of enantioenriched hydroquinazoline cores via a novel bifunctional iminophosphorane squaramide catalyzed intramolecular aza-Michael reaction of urea-linked α,β-unsaturated esters is described. The methodology exhibits a high degree of functional group tolerance around the forming hydroquinazoline aryl core and wide structural variance on the nucleophilic N atom of the urea moiety. Excellent yields (up to 99%) and high enantioselectivities (up to 97 : 3 er) using both aromatic and less acidic aliphatic ureas were realized. The potential industrial applicability of the transformation was demonstrated in a 20 mmol scale-up experiment using an adjusted catalyst loading of 2 mol%. The origin of enantioselectivity and reactivity enhancement provided by the squaramide motif has been uncovered computationally using density functional theory (DFT) calculations, combined with the activation strain model (ASM) and energy decomposition analysis (EDA).

The activation of both aromatic and aliphatic ureas as N-centered nucleophiles in intramolecular Michael addition reactions to α,β-unsaturated esters was achieved under bifunctional iminophosphorane squaramide superbase catalysis.     

On-column concentration of bisphenol A with one-step removal of humic acids in water

An efficient extraction method for bisphenol A from environmental water including contaminants was developed using surface selective localization of functional group, on a polymeric separation device. The polymer utilized in this study was prepared through a kind of molecular imprinting technique, namely fragment imprinting effect utilizing a pseudo-template molecule (p-tert.-butylphenol) instead of bisphenol A. The concentration of bisphenol A onto the polymer device prepared, up to 1000 times concentration from environmental water including contaminants (humic acids), was achieved very easily with interesting exclusion effect for humic acids. The results obtained in this study suggest that molecular imprinting with the pseudo-template molecule is quite an effective way for selective concentration of the diluted target molecule from other contaminants including similar functional group with the target molecule.     

Highly chemo- and regioselective intermolecular cyclotrimerization of alkynes catalyzed by cationic rhodium(I)/modified BINAP complexes

[reaction: see text] Cationic rhodium(I)/modified BINAP complexes are effective catalysts for highly regioselective intermolecular cyclotrimerization of terminal alkynes and highly chemo- and regioselective intermolecular cocyclotrimerization of diethyl acetylenedicarboxylate (DEAD) and terminal alkynes. It is a noteworthy example of intermolecular cocyclotrimerization of two different alkynes in terms of catalytic activity, chemo- and regioselectivity, scope of substrates, and ease of operation. The wide applicability of this new cocyclotrimerization procedure is demonstrated in the one-step synthesis of [6]metacyclophane.     

痕量硒催化测定法反应机理的研究

本文研究了Kawashima,Kai and Takashima制定的痕量硒催化测定法的反应机理。提出在这类反应中由芳肼氧化生成的重氮盐只有一小部分和偶联剂生成可测的染料,催化反应中ClO_3~-与Se之间的氧还原反应需有Cl~-参加,并提出可能的反应历程。建议在芳肼和偶联剂的选择以及反应条件的控制上作进一步研究,有可能找到更为灵敏可靠的方法。     

Mannich reactions of heterocycles with dimethyl(methylene) ammonium chloride: A high yield,one-step conversion of estazolam to adinazolam

The readily prepared ammonium salt, (CH₃)₂N⁺ = CH₂Cl^?, 4 , functionalized heterocycles differently, but in a predictable fashion, under neutral, basic or acidic conditions. Triazolo- and imidazobenzophenones 1b ′ and 5 , which primarily underwent intramolecular isomerization to indolols 2a ′ and 6a rather than intermolecular electrophilic substitution under conditions of the normal aqueous Mannich reaction, were converted with 4 to the desired benzophenone derivatives, 1c ′ and 7 , respectively, in moderate yields. The 1-unsubstituted triazolo- or imidazobenzodiazepines, 10a (estazolam) and 10b , were transformed to the corresponding 1-(dimethylamino)methyl derivatives, 11a (adinazolam) and 11b , in good to moderate yields (61% and 32%, respectively.) Under acidic reaction conditions, 1-methyl triazolobenzodiazepine, 10d (alprazolam), afforded 12e , the product of attack at C-4 of the triazolo[4,3-a][1,4]benzodiazepine ring system. Under strongly basic conditions in which the anion of 10d was generated prior to reaction with 4 , both 12e and its isomer, 15 , were formed. These results complement the report that 4 may be used to functionalize the 1-methyl position of triazolobenzodiazepines, and further demonstrate the versatility of reagent 4 in heterocyclic synthesis.     

Electrochemical, spectroscopic, and structural evidence for the mild hydrolysis of tetracyanoethylene, TCNE, to form the 2,3,3-tricyanoacrylamidate ligand: isolation of an unexpected quadruply-bonded polymeric material [Mo2(O2CCMe3)3((NC)2CC(CN)CONH)]infinity

Under strictly anhydrous conditions, no reaction occurs between Mo(2)(O(2)CCMe(3))(4) and tetracyanoethylene, TCNE, at room temperature, but after addition of 1 equiv of water, a reaction proceeds to form [Mo(2)(O(2)CCMe(3))(3)((NC)(2)CC(CN)CONH)], 1. The compound contains a quadruple-bonded Mo(2) unit and the 2,3,3-tricyanoacrylamidate anion as a ligand (TC3A), a very unusual hydrolyzed form of TCNE. Two different solid-state structures were obtained after crystallization of 1. Crystals obtained from CH(2)Cl(2) consist of a two-dimensional network, and crystals grown from a C(6)H(6) solution form a 1-D chain motif. In both cases, the TC3A ligand acts as a polydentate ligand involving a bidentate OCN bridging unit and two CN groups. The electrochemical and spectroscopic (IR, UV/vis/near-IR, NMR, EPR) properties of 1 support the formulation in solution as a discrete 1:1 complex of the TC3A donor ligand and a Mo(2) unit with no charge transfer. The coordinated TC3A ligand exhibits redox properties similar to those of free TCNE.     

Self-oriented pseudoisocyanine J-aggregates in solution

Highly oriented fiber-shaped J-aggregates of pseudoisocyanine (PIC) molecules were prepared by simply growing the aggregates in a narrow glass cell, which allows evaporation of the solution in one direction.