阳离子淀粉-壳聚糖-丙烯酰胺的接枝共聚研究

以硝酸铈铵为引发剂,合成阳离子淀粉(CS)-壳聚糖(CTS)-丙烯酰胺(AM)接枝共聚物,讨论了反应温度、引发剂浓度、单体用量、反应时间以及壳聚糖用量对接枝共聚反应的影响。结果表明:淀粉中葡萄糖环浓度(cAGU)为0.20 mol/L,mCTS/mCS=1/6,cAM=1.0mol/L,cCe4 =5 mmol/L,反应温度60℃,反应时间3 h时,转化率和接枝效率可分别达到88%和92%以上;转化率随mCTS/mCS增大而增大,接枝效率则随着CTS用量增大降低,CTS的存在使AM均聚的几率增大。     

量化方法研究分子结BEMP和TEMP的电子输运特性

通过结合杂化密度泛函和前线轨道理论与弹性散射格林函数方法研究了BE- MP(benzene-1,4-di-ethynyl-4-mercaptophenyl)和TEMP(thiophene-2,5-di-ethynyl-4- mercaptophenyl)两分子结的输运性质。基于杂化密度泛函方法计算两扩展分子电子结构的基础上,计算了两分子的输运性质．计算结果显示:电流增加来源于电极和分子轨道的共振;电导曲线呈现出平台特征．在此基础上从扩展分子A(Au-BEMP-Au)中间的苯环的旋转而引起电流减小的角度解释了负微分电阻现象．     

一代树状碳硅烷液晶的光化学研究－－端基含12个4－丁氧基氮苯介晶基元

研究了新的含12个丁氧基偶氮苯介晶基元的五代树状碳硅烷液晶D1及偶氮苯介 晶基元化合物M5在氯仿、四氢呋喃、N，N－二甲基甲酰胺、乙醇和苯等溶剂中的量 子产率、反－顺光异构化、光回复异构、反／顺异构组分比、热回复异构及活化能 。D1和M5的光致变色速率常数为10~(-1)s~(-1)，而含同一偶氮基元的光致变色液 晶聚硅氧烷的光致变色速率常数为10~(-8)s~(-1)，因此，液晶树状物D1的光响应 速度比后者快10~7倍。     

用DCC/DMAP合成N-苄氧羰基氨基酸薄荷酯

以乙腈为溶剂, 用DCC/DMAP偶合法合成了5个N-苄氧羰基氨基酸薄荷酯, 产率90%～94%. 起始原料氨基酸包括: 甘氨酸, DL-蛋氨酸, β-丙氨酸, L-缬氨酸和L-脯氨酸. 给出了目标产物的氢谱、碳谱、红外光谱、质谱、高分辨质谱和元素分析数据.     

亚硝基R盐离子对固相萃取光度法测定钴(Ⅱ)

研究了用亚硝基R盐离子对固相萃取光度法测定钴,在pH 6.0的HOAc-NH4OAc缓冲介质中,溴化十六烷基三甲基铵(CTMAB)存在下,亚硝基R盐与钴反应生成3∶1稳定络合物,该络合物可用C18固相萃取小柱富集,富集倍数达100倍,小柱上富集的络合物用乙醇洗脱后用光度法测定,钴的质量浓度在0.05~5.0 mg.L-1内符合比耳定律。方法用于食品样和水样中钴的分析,结果与AAS法测得结果一致,RSD值(n=5)≤2.5%,回收率在97%~103%之间。     

Synthesis and Characterization of Novel Polyimides Based on Pyridine-containing Diamine

A new aromatic diamine monomer containing pyridine unit, 2,6-bis （4-aminophenoxy- 4＇-benzoyl）pyridine（BABP）, was synthesized in three steps, starting from 2,6-pyridinedicarboxyl chloride. A series of novel pyridine-containing polyimides were prepared v/a the polycondensation of BABP with various aromatic dianhydrides through poly（amic acid） precursors, and thermal or chemical imidization of the precursors. The polyimides exhibit desirable properties, e.g., good solubility in N-methyl-2-pyrrolidone and m-cresol, excellent thermal stability and film-forming capability, as well as high inherent viscosity, indicating high molecular weight.     

新显色剂8-[杯(4)芳烃偶氮]氨基喹啉的合成及其与金的显色反应

合成了一种新的杂环偶氮类显色试剂 8 [杯 ( 4 )芳烃偶氮 ]氨基喹啉(CAQ) 1。研究了该试剂与金的显色反应的适宜条件 ,在碱性介质中 ,在CTMAB存在下 ,试剂与金生成 1∶1稳定络合物 ,建立了测定金的光度法新体系 ,体系至少可稳定 8h ,λmax =640nm ,ε =2 .0 6× 1 0 5L·mol-1·cm-1,金含量在 0～ 2 2μg 2 5mL内符合比尔定律。方法已用于金矿石中微量金的测定。     

含噁二唑的聚(间亚苯乙烯)电致发光二极管

1990年英国剑桥大学的Burroughes等人[1]以聚(对亚苯乙烯)为发光材料制备了第一个有机聚合物电致发光二极管,该工作引起了科学工作者的极大兴趣.聚合物材料具有很好的电、热稳定性以及机械加工和成膜性能,发光亮度和效率较高,通过化学修饰可获得三原色发光.而且聚合物电致发光二极管的工作电压较低,可实现大面积平板显示和集成化.     

二甲醚电氧化及其阳极催化剂研究

Anode electro-catalysts for direct dimethyl-ether fuel cell (DDFC), Pt/C, PtRu/C (1∶1) and PtSn/C (3∶2), were prepared by chemical impregnation-reduction method with formaldehyde as the reductant. DME electro-oxidation and adsorption at Pt electrode and Pt electro-catalysts were investigated by Cyclic Voltammetry(CV), Quasi-steady state polarization and Gas Chromatography(GC). CV showed that there were two current peaks of DME electro-oxidation at Pt electrode around 0.8V (vs RHE); DME was adsorbed at Pt electrode more weakly and slowly than oxygen, methanol, even hydrogen; the onset potential of DME oxidation was 50mV less than that of methanol, and DME peak potential 110 mV lower, thus more advantageous for using in fuel cells than methanol. GC showed that small amount of HCHO was generated during DME electro-oxidation. The mechanism of DME electro-oxidation was proposed. Among the three electro-catalysts (Pt/C, PtRu/C and PtSn/C), Pt alloy catalysts, especially PtRu/C, showed a higher performance toward DME electro-oxidation, as in the case of methanol. Temperature experiments showed that both DME electro-oxidation and adsorption on Pt and Pt alloy catalysts were favored with increased temperature.     

含羧酸配体的鼓形有机锡氧簇合物：六聚苯基锡氧3-吲哚丁酸酯的合成及晶体结构

利用Ph3SnOH和3-吲哚丁酸以1：1摩尔比反应，合成了新型含羧酸配体的鼓形 有机锡氧簇合物：六聚苯基锡氧3-吲哚西酸酯。通过元素分析、红外光谱和X射线 单晶衍射对其结构进行了表征。测试结果表明：该化合物为三斜晶系，空间群P1， a=1.1722(6),b=1.5694（8）nm，c=1.7227(9)nm，α=116.251（8）°，β=100. 854（10）°，γ=95.606（9）°，Z=1，V=2.732(3)nm^3，Dc=1.554g·cm^-3，μ =1.420mm^-1，F(000)=1276，R=0.0630，ωR=0.0762。晶体结构中，六配位的锡原 子呈畸变的八面体构型。