Reaction of 3-Diazocamphor with Silver Ion - Formation of Tricyclanone

The usual method of formation of tricyclanone (1) involves thermolysis of an intimate mixture of 3-diazocamphor (3) and copper powder and is thought to involve ketocarbene (5).¹ Recently this method has been supplemented² by one which involves reaction of 3,3-dibromocamphor with diethylzinc in benzene where α-elimination to give ketocarbene (5) is mediated by 3-bromocamphor carbanion whose role is indicated by trapping as 3-bromocamphor; this material accounts for ca. 10% of product even after prolonged reaction times.     

Pd–NHC Catalyzed Biaryl Coupling by Direct C–H Activation—A Novel Strategy for the Synthesis of Dibenzocyclooctane Lignans

Cross-coupling reactions, such as Buchwald-Hartwig arylamination and direct intramolecular biaryl coupling by C–H activation, were carried out using various Palladium-N-heterocyclic carbenes (Pd–NHC) as catalysts. The yields were good to excellent. The latter strategy was adopted to transform two dibenzylbutane lignans, isolated from the leaves of Ocotea macrophylla (Lauraceae), into the corresponding dibenzocyclooctane lignans in good overall yields.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

Electrophilic aromatic prenylation via cascade cyclization

To gain access to prenylated hexahydroxanthenes, tandem cascade cyclization–electrophilic aromatic substitution reactions have been studied on substrates bearing allylic and propargylic substituents. Both BF₃·OEt₂ and TMSOTf can be used to initiate this reaction sequence, resulting in different ratios of the C-2 and C-6 substitution products. Even though allylic transposition is observed in some cases, the results of a crossover experiment are consistent with an intramolecular reaction sequence. Taken together, these studies now allow preparation of either the C-2 or C-6 prenylated hexahydroxanthene products.     

Synthesis of Novel Bithiophene-Substituted Heterocycles Bearing Carbonitrile Groups

Symmetrical and unsymmetrical bithiophene-substituted heterocycles bearing carbonitriles including imidazo[1,2-a]pyridine, benzimidazole, and pyridine derivatives have been synthesized via different synthetic protocols. The bithiophene bis-imidazo[1,2-a]pyridine derivatives 3a,b were achieved in three steps starting from 2-acetyl-5-bromothiophene. Suzuki coupling reaction of 2a with 5-formylthiophen-2-ylboronic acid forms the formyl derivative 5, which by condensation with 3,4-diaminobenzonitrile in the presence of sodium bisulfite furnishes the unsymmetrical bithiophene derivative6. The bis-benzimidazole derivative 8 was obtained via hexabutylditin-mediated homocoupling of 5-bromothiophene-2-carboxaldehyde, while the benzimidazole derivatives 12a,b were prepared via the formyl derivatives 11a,b, a product of Velsmier formylation reaction of 10a,b. Two synthetic protocols for the aryl/hetaryl-2,2′-bithiophene derivative 14 have also been presented. In addition, the guanyl hydrazones of bithiophenes, 16 and 17, were prepared from bis(tri-n-butylstannyl)-2,2′-bithiophene through a Stille coupling reaction followed by a condensation step.     

A scalable process for the synthesis of (E)-pterostilbene involving aqueous Wittig olefination chemistry

A synthetic approach toward the pharmacologically active (E)-stilbene pterostilbene is described using a Wittig reaction conducted under mildly basic, aqueous conditions. A surprising, non-intuitive difference in (E)/(Z) stereoselectivity was observed comparing the two possible isomeric Wittig routes, allowing for the development of a highly efficient process to access the title stilbene derivative through a one-pot olefination deprotection sequence.     

Structure and Polymorphism of M(thd)3 (M = Al,Cr, Mn,Fe, Co,Ga, and In)

Formation, crystal structure, polymorphism, and transition between polymorphs are reported for M(thd)₃, (M = Al, Cr, Mn, Fe, Co, Ga, and In) [(thd)^– = anion of H(thd) = C₁₁H₂₀O₂ = 2, 2, 6, 6‐tetramethylheptane‐3, 5‐dione]. Fresh crystal‐structure data are provided for monoclinic polymorphs of Al(thd)₃, Ga(thd)₃, and In(thd)₃. Apart from adjustment of the M–O_k bond length, the structural characteristics of M(thd)₃ complexes remain essentially unaffected by change of M. Analysis of the M–O_k, O_k–C_k, and C_k–C_k distances support the notion that the M–O_k–C_k–C_k–C_k–O_k– ring forms a heterocyclic unit with σ and π contributions to the bonds. Tentative assessments according to the bond‐valence or bond‐order scheme suggest that the strengths of the σ bonds are approximately equal for the M–O_k, O_k–C_k, and C_k–C_k bonds, whereas the π component of the M–O_k bonds is small compared with those for the O_k–C_k, and C_k–C_k bonds. The contours of a pattern for the occurrence of M(thd)₃ polymorphs suggest that polymorphs with structures of orthorhombic or higher symmetry are favored on crystallization from the vapor phase (viz. sublimation). Monoclinic polymorphs prefer crystallization from solution at temperatures closer to ambient. Each of the M(thd)₃ complexes subject to this study exhibits three or more polymorphs (further variants are likely to emerge consequent on systematic exploration of the crystallization conditions). High‐temperature powder X‐ray diffraction shows that the monoclinic polymorphs convert irreversibly to the corresponding rotational disordered orthorhombic variant above some 100–150 °C (depending on M). The orthorhombic variant is in turn transformed into polymorphs of tetragonal and cubic symmetry before entering the molten state. These findings are discussed in light of the current conceptions of rotational disorder in molecular crystals.     

On the difference in material structure and fatigue properties of nylon specimens produced by injection molding and selective laser sintering

This paper describes the influence of dynamic tension/compression loading on notched and unnotched nylon specimens fabricated by Injection Molding (IM) and Selective Laser Sintering (SLS). The main objective of this work is to analyze and describe the differences in material structure and fatigue properties of as-built nylon parts produced by IM and SLM from the same polyamide 12 powder. The differences in dimensional quality, density, surface roughness, crystal structure and crystallinity are systematically measured and linked to the mechanical fatigue properties. The fatigue properties of the unnotched SLS specimens are found to be equal to those of the unnotched IM specimens. The presence of pores in the sintered samples does not lead to rapid failure, and the microvoid coalescence failure mechanism is delayed. The notched specimens show more brittle failure and increased fatigue resistance which is caused by local notch-strengthening. The results enable improved understanding of the difference in material structure and fatigue behavior of selective laser sintered and injection molded polyamide.     

Anticoincidence INAA capabilities for analysis of FDA Total Diet Study seafoods

Anticoincidence instrumental neutron activation analysis was used to analyze three portions each of five fresh-weight FDA Total Diet Study seafoods from 3 Market Basket collections for fiscal years 2006–2008. Portions were treated with l-cysteine solutions to enhance retention of Hg during irradiation then dried at room temperature over magnesium perchlorate. Results or limits of detection were obtained for 33 elements. In general, results agreed with those available from FDA’s Kansas city field laboratory (KAN-DO). Of three shrimp composites analyzed, one showed mass fractions of Ag, Fe, rare earths, U, Th, and Mo significantly higher (up to a factor of 10) than the other two shrimp composites. The same shrimp composite showed a lower Hg result (about 50 % after accounting for any irradiation loss) compared to the KAN-DO value. This may represent a drying loss. There were other indications of Hg loss during the drying process. SRM 1947 Lake Michigan Fish Tissue, run as a control, yielded an INAA Hg mass fraction 20 % lower (corrected for irradiation losses) than the certified value, similar to the difference between the INAA (0.171 mg/kg Hg) and KAN-DO (0.211 mg/kg Hg) results for a TDS canned tuna composite. Because previous studies showed that l-cysteine effectively sequesters inorganic Hg, these discrepancies likely represent methyl mercury loss. INAA results for As, Fe, Rb, and Se were in good agreement with SRM 1947 certified values.