FW调剖技术及应用

应用FW调剖技术有针对性地对 119口非钻停井区注水井采取了 4种精细调剖方案 ,对比了化学浅调剖应用前后注水井层间矛盾的缓解 ,纵向上吸水剖面的改善 ,注水量和吸水指数的变化及渗流能力的变化。结果表明 ,注水井化学浅调剖后 ,井区的连通油井明显受效 ,获得较高的增油量 ,水驱的开发效果得到改善。化学浅调剖可以有效地封堵高渗透层 ,扩大低渗透层注入水的波及体积 ,减缓注水井层间矛盾 ,实现了对注水井吸水剖面的有效调整 ,这对深化注水结构调整、挖掘各类油层潜力、提高储量动用程度有显著的效果。     

I/OIMAGESYSTEM微波中继应用

微波中继的应用非常广泛 ,目前在二维、三维施工中跨越障碍物时 ,一般都使用微波中继站来传输命令和数据。文章就微波中继及I/OIMAGESYSTEM“蛇形排列”先进功能的实际应用进行了详细的阐述 ,同时提出了使用微波中继站应注意的问题。     

添加剂组成对通用内燃机油性能的影响

通过相关模拟试验，分析研究了添加剂组成对通用内燃机油的抗磨性能，抗氧化性能以及清净分散性能的影响。     

流量自动控制的设计与实现

文章通过分析多相流模拟井的实际工作要求 ,提出了简单实用的流量自动控制模型。应用成型的计算机数据采集和控制模块及稳定可靠的流量控制部件 ,实现了各相流量的自动控制过程。该流量自动控制系统调节精度高、速度快、整体造价低 ,在实际应用中取得了良好的效果。     

建筑墙体表面传热系数辨识研究

对实验房间南向墙体内表面中心区域的换热过程进行实验，发现当风速在0－5．5m/s之间时，表面传热系数在8－18W（m^2.K）之间波动，而风向对墙体表面传热系数影响不大；用辅助变量法分析墙体表面传热过程，并结合实验推导出墙体表面传热系数。模型的预测结果与实测结果吻合良好。     

磁场对泡沫钻井液电导率的影响研究

磁处理技术是利用磁场对非铁磁性流体作用．使被作用物的性质产生某些期望的变化，从而改善生产效果和使用效益。磁处理对常规钻井液流变性能的影响研究结果表明，磁化能明显改善钻井液性能。通过研究磁化后泡沫钻井液的性质．测定与控制钻井液的电导率，以便从电测曲线上取得更好的地层特性评价。泡沫钻井液的电导率与密度基本呈线性关系，电导率随密度的升高而变大；磁处理后泡沫钻井液的性质发生明显改变．泡沫钻井液的电导率有不同程度的下降，在磁场强度为100mT、蜂数为2的磁场条件下泡沫钻井液的电导率变化率降低最大，电导率平均下降16％左右。     

可持续发展战略指导下的轨道交通规划与评价

提出了轨道交通规划与评价在实施可持续发展战略过程中需要研究的问题，研究重点是轨道交通规划与评价方法体系和环境对策，研究了轨道交通规划目标的变化、轨道交通规划优化决策理论与方法、轨道交通规划中的环境影响评价、城市轨道交通网络的合理规划、城际轨道交通——客运专线/高速铁路线路基本走向的规划、轨道交通规划可持续发展的评价指标体系概念框架、轨道交通系统可持续发展的能力建设问题等，并通过实例验证了所建立的理论方法体系和模型体系；不仅进行了有关理论和方法的探讨，而且以面向实际应用为目标，开发了相应的软件系统，为轨道交     

Object-oriented DBMS requirements

The requirements on an object-oriented DBMS for management of information in a large, complex enterprise are presented. These requirements aid in the achievement of an environment characterized by data sharing, open architectures, application and data portability, and assurance of data integrity. They were defined from the point of view of a user of the DBMS; therefore they describe the expected functionality of the DBMS and do not specify the method of implementation to achieve this functionality. They encompass requirements on the data model, query and data manipulation languages, the system architecure, interfaces to the system, change management, and transaction management.     

Specification methods for material-handling control algorithms in flexible manufacturing systems

Good methods are needed to specify, test, and debug material-handling control logic. This article surveys a number of representative methods for defining and describing control algorithms for programmable material-handling equipment used in flexible manufacturing systems. The methods are evaluated with regard to their suitability for communication between people and as bases for interfaces to automatic program generators. It is concluded that no single method is entirely satisfactory. Three methods (position diagrams, function block diagrams, and operation networks) have potential to be combined into an effective hybrid approach that minimizes the need for the user to switch between various conceptual models.     

The relativistic charged particles identification method based on the goodness-of-fit ωn-criterion

The statistical method of identification of relativistic charged particles by measurements of ionization losses or time-of-flights simultaneously in some detectors of an experimental plant on the basis of the new goodness-of-fit ω_n³-criterion is considered. The method proposed has been used for the secondary particles identification from the high energy -particles fragmentation on target nuclei. The efficiency of the method is excellently illustrated by reliable separation of events (rare events as well), connected with the appearence of 1- and 2-charged particles. The comparison of the ω_n³-method with the traditional methods and with the method based on the ω_n²-criterion shows that the new method outperforms the ω_n²-method and most of the traditional ones in efficiency, but compares unfavourably with the likelihood method in power, however, the former has a number of advantages as compared with the latter.