Water vapor absorption at isotopic CO2 laser wavelengths

Water vapor absorption at 161 wavelengths, from 9.2 to 11.9 micron, of the 12C1602, 13C1602, and 14CI602 lasers was measured using a resonant optoacoustic spectrometer. Results were obtained at several precisely determined vapor concentrations in a flow of pure air at a total pressure of 1 atm. Since the same apparatus and methodology were used for all measurements, a reliable assessment can be made of the relative merits of the three lasers in applications such as atmospheric propagation and ranging.     

Development of an interlocked nail for segmental defects in the rabbit tibia

Previous animal models have been developed to study intramedullary nailing for challenging segmental defects in the tibia. In large animals, interlocked nail fixation created a stable environment suitable to study new bone growth technologies placed in the defect. To our knowledge, there are no comparable interlocked tibial defect models for the rabbit in which new technologies could be evaluated. Such a model would be helpful since the rabbit is a popular initial model for orthopedic research studies owing to its wide availability and low cost. While numerous studies have nailed the rabbit tibia, all were non-locked implants that allowed some degree of instability between the fracture fragments. In addition, the non-locked nails were constructed of stainless steel, whereas human nails are increasingly made from titanium alloy. In the current study, an interlocked titanium nail was developed for the rabbit tibia. It was implanted in cadaver tibiae and subjected to fatigue cycling in combined compression and bending at physiologic levels to 21,061 cycles. This duration is estimated to represent 12 weeks of gait by the animal. Before and after fatigue cycling, monotonic testing was performed in compression and bending at physiologic levels. The intact contralateral limbs served as controls. All limbs completed the cycling; the instrumented limbs exhibited interfragmentary cyclic strain amplitudes during fatigue (616 +/- 139 micro-strain), which was significantly greater than the control limbs (136 +/- 35 microstrain). Monotonic strain amplitudes for the test limbs in bending and compression were 4839 +/- 1028 and 542 +/- 122 microstrain, respectively; corresponding values for the control bones were 407 +/- 118 and 95 +/- 38 microstrain, respectively. These data are similar to those presented in prior studies in larger bone models. The current study presents one method for interlocked nail fixation for this complex tibial shaft fracture in a small animal.     

Fluorescence in situ hybridization of three oncogenes on a leiomyoma

Using fluorescence in situ hybridization technique, expression of three oncogenes, C-myc, RARa, and cyclin-D was tested on a uterine leiomyoma. C-myc and RARa were amplified in approximately 30% and 90% of the cells, respectively. Numerous small signals of C-myc were indicative of the presence of double minutes. Amplification of RARa is being reported for the first time in a leiomyoma. Cyclin-D was normal in diploid cells while it was highly amplified in polyploid cells. Low levels of amplified C-myc and cyclin-D cells seem to be the reason for this tumor to be benign, while RARa could not be effective without the association of some other gene such as PML. Information presented here are significant toward developing new curative strategies such as gene-specific drugs and molecular manipulation to stop the activity of cancer gene. Further study may elucidate that how fibroids grow and maintain their rare benign nature.     

碱性含镁球团矿的应用及合理炉料结构研究

使用碱性含镁球团矿可提高氧化球团矿质量,进而改善高炉生产指标.从理论上分析了碱性含镁球团矿的冶金性能,并探讨了包钢高炉炼铁合理的炉料结构,研究结果表明:碱性含镁球团矿中合理的MgO的质量分数为1.8%,烧结矿中合理的MgO的质量分数为1.8%、碱度为1.7.依据包钢现有的资源条件分析了通过添加轻烧白云石细磨粉,制作含镁碱性球团的可行性.     

MnO2对煤粉燃烧的助燃作用及机理

研究考察了添加ＭｎＯ２对不同种煤粉燃烧率的影响，并对ＭｎＯ２提高煤粉燃烧率的机理进行了理论分析和试验探讨。得出（１）煤粉燃烧率随ＭｎＯ２添加量的增加而显著上升：添加５％ＭｎＯ２可使无烟煤（挥发分８％）燃烧率提高１８％，使烟煤（挥发分３３％）提高８％；（２）ＭｎＯ２提高煤粉燃烧率的机理在于ＭｎＯ２受热分解释放出活性氧，加快了煤粉着火初期的火焰传播速度；（３）ＭｎＯ２与富氧技术并用可以进一步提高煤粉燃     

Phototoxicity and fluorotoxicity combine to alter the behavior of neutrophils in fluorescence microscopy based flow adhesion assays

The use of fluorescent probes that allow visualization of leukocyte-endothelial cell (EC) interactions has greatly informed our understanding of leukocyte recruitment. However, effects of these agents on the biological functions of leukocytes are poorly described, leading to concerns about the interpretation of such data. Here we used two flow-based neutrophil adhesion assays to compare the effects of phase contrast illumination (PCI) with high intensity illumination (HII) used for fluorescent microscopy, in the presence or absence of five commonly used fluorochromes. Isolated neutrophils were either (1) perfused across P-selectin to establish a population of rolling cells, which were subsequently activated with fMLP; or (2) perfused across EC activated with TNF-alpha. In the absence of fluorescent dyes, HII did not affect levels of leukocyte adhesion; however, subsequent neutrophil behavior was dramatically altered when compared with cells under PCI, for example, dramatically reducing their migration velocities. In the presence of fluorescent dyes, the effects of HII were exacerbated, although the precise nature of the biological effects of these probes was agent specific. Thus, for the first time, our experiments describe the effects of fluorescent microscopy on the separate stages of the neutrophil recruitment process and reveal a previously unsuspected effect of HII on neutrophil migration.     

Simulating ion beam extraction from a single aperture triode acceleration column: a comparison of the beam transport codes IGUN and PBGUNS with test stand data

Ion beam extraction from two different ion sources with single aperture triode extraction columns was simulated with the particle beam transport codes PBGUNS and IGUN. For each ion source, the simulation results are compared to experimental data generated on well-equipped test stands. Both codes reproduced the qualitative behavior of the extracted ion beams to incremental and scaled changes to the extraction electrode geometry observed on the test stands. Numerical values of optimum beam currents and beam emittance generated by the simulations also agree well with test stand data.     

Envelope pulsed ultrasonic distance measurement system based upon amplitude modulation and phase modulation

A novel microcomputer-based ultrasonic distance measurement system is presented. This study proposes an efficient algorithm which combines both the amplitude modulation (AM) and the phase modulation (PM) of the pulse-echo technique. The proposed system can reduce error caused by inertia delay and amplitude attenuation effect when using the AM and PM envelope square wave form (APESW). The APESW ultrasonic driving wave form causes a phase inversion phenomenon in the relative wave form of the receiver. The phase inversion phenomenon sufficiently identifies the "measurement pulse" in the received wave forms, which can be used for accurate time-of-flight (TOF) measurement. In addition, combining a countertechnique to compute the phase shifts of the last cycle for TOF, the presented system can obtain distance resolution of 0.1% of the wavelength corresponding to the 40 kHz frequency of the ultrasonic wave. The standard uncertainty of the proposed distance measurement system is found to be 0.2 mm at a range of 50-500 mm. The APESW signal generator and phase detector of this measuring system are designed on a complex programmable logic device, which is used to govern the TOF measurement and send the data to a personal computer for distance calibration and examination. The main advantages of this APESW system are high resolution, low cost, narrow bandwidth requirement, and ease of implementation.     

In-situ comprehensive calibration of a tri-port nano-electro-mechanical device

We report on experiments performed in vacuum and at cryogenic temperatures on a tri-port nano-electro-mechanical (NEMS) device. One port is a very nonlinear capacitive actuation, while the two others implement the magnetomotive scheme with a linear input force port and a (quasi-linear) output velocity port. We present an experimental method enabling a full characterization of the nanomechanical device harmonic response: the nonlinear capacitance function C(x) is derived, and the normal parameters k and m (spring constant and mass) of the mode under study are measured through a careful definition of the motion (in meters) and of the applied forces (in Newtons). These results are obtained with a series of purely electric measurements performed without disconnecting/reconnecting the device, and rely only on known dc properties of the circuit, making use of a thermometric property of the oscillator itself: we use the Young modulus of the coating metal as a thermometer, and the resistivity for Joule heating. The setup requires only three connecting lines without any particular matching, enabling the preservation of a high impedance NEMS environment even at MHz frequencies. The experimental data are fit to a detailed electrical and thermal model of the NEMS device, demonstrating a complete understanding of its dynamics. These methods are quite general and can be adapted (as a whole, or in parts) to a large variety of electromechanical devices.