Electrochemical determination of estradiol using a poly(l-serine) film-modified electrode

A thin film of poly(l-serine) was prepared via electropolymerization for the determination of trace levels of estradiol. In pH 5.0 phosphate buffer, l-serine was oxidized during the cyclic potential sweeps between −0.60 and 2.0 V, forming a thin film at the electrode surface. The electrochemical behavior of estradiol was investigated. The oxidation peak potential of estradiol shifts negatively at the poly(l-serine) film-coated glassy carbon electrode (GCE) compared with that at the bare GCE. Otherwise, the oxidation peak current greatly increases at the poly(l-serine) film-modified GCE. These phenomena suggest that the poly(l-serine) film exhibits catalytic activity towards the electrochemical oxidation of estradiol. Based on this, a sensitive, rapid and simple electrochemical method was proposed for the determination of estradiol. The limit of detection is evaluated to be 2.0 × 10⁻⁸ mol L⁻¹. Finally, this method was successfully used to determine estradiol in blood serum.     

Application of ultrasonic waves in activation of microcrystalline cellulose

In this work, microcrystalline cellulose (MCC) was activated with ultrasonic waves. The influences of ultrasonic treatment on the changes of supramolecular structures and morphology structure were studied by WAXS and SEM. The accessibility of the MCC was characterized by water retention value (WRV) and specific surficial area. The influence of ultrasonic treatment on the reactivity of MCC was investigated through the reaction of MCC being oxidized into 2,3‐diadehyde cellulose (DAC) by periodate sodium. The mechanism of the reactivity change of ultrasonically treated MCC was examined. The results showed that the degree of crystallinity of MCC decreased and the degree of polymerization showed little change after treatment with ultrasonic waves. The morphologial variation of the treated MCC was significant when compared with the untreated MCC, which contribute to the improvement of accessibility. The aldehyde content of DAC prepared from ultrasonically treated MCC was improved from 64.19 to 85.00%, indicating that the regioselective oxidation reactivity of MCC was significantly improved. The aldehyde content was found to first increase with time of ultrasonic treatment to a point, and then decrease as time progressed. In addition, the aldehyde content was found to increase with an increase in ultrasonic power. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Influence of post‐treatments on the properties of porous poly(vinyl alcohol) membranes

Porous poly(vinyl alcohol) (PVA) membranes were prepared by a phase‐inversion method. The influence of chemical crosslinking and heat treatments on the swelling degree, resistance to compaction, mechanical strength, and morphology of porous PVA membranes was extensively studied. The crosslinking degree and crystallinity of the membranes, calculated from IR spectra, increased with the treatment time. The porosity, calculated on the basis of swelling experiments, showed a decreasing trend for heat‐treated membranes but remained almost at a constant value for crosslinked membranes. Such a change was further proved with scanning electron microscopy pictures. The behavior was explained by the rearrangement of PVA chains during the heat‐treatment process, which led to morphological changes in the membranes. The mechanical properties of the porous membranes in dry and wet states were measured, and a great difference was observed between crosslinked and heat‐treated membranes in the dry and wet states. The crosslinked membranes showed good mechanical properties in the dry state but became fragile in the wet state. On the contrary, the heat‐treated membranes were more flexible in the wet state than in the dry state. This change was explained by the turnaround of inner stress in the systems during the swelling process. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

组成对MgO-ZrO2-CaO系合成料结构与性能的影响

以脱硅锆、轻烧氧化镁、消石灰为原料，进行了MgO-ZrO2-CaO系原料的合成，研究了化学组成(包括ZrO2含量、CaO／ZrO2比)，烧成温度，杂质等对合成料性能和组织结构的影响。     

烧结原料场大面积扬尘的控制措施

针对烧结原料场大面积扬尘的情况。提出了综合治理措施。着重对适合于烧结用粉状物料的扬尘抑制剂进行了研究。     

技术进步经济效益评价——中国长城铝业公司水泥厂产出增长中技术进步作用的评价

本文通过运用“生产函数法”、“增长速度方程”来定量分析技术进步在长城铝业公司水泥厂产出增长中的作用,从中找出该水泥厂生产经营过程中存在的问题及未来发展方向。     

UNIX系统入侵检测知识库体系结构研究

针对目前应用在UNIX系统中入侵检测知识库适应能力不足的问题.提出了一种适应于不同系统环境的知识库体系结构。检测规则按相应系统与服务类型以模块化形式存储,通过应用配制文件加载。实现了入侵检测知识库的可扩展性.提高了入侵检测知识库的通用性,并且可以提高检测规则的搜索效率。     

ESW激波吹灰器在余热锅炉的应用

介绍了ESW激波吹灰器的工作原理及其在茂名分公司Ⅲ套催化裂化装置余热锅炉的应用情况。应用结果表明，使用ESW激波吹灰器吹灰效果明显，吹灰后余热锅炉排烟温度可下降29℃，过热蒸汽产量增加7t/h，锅炉自产饱和蒸汽产量增加2t/h，有效提高了余热锅炉的传热效率和过热能力，节能效果显著。对应用中出现的一些问题提出了改进建议。     

Influence of Shaping Condition on Etherification Performance of Hβ Zeolite

Etherification reaction of FCC light gasoline over Hβ zeolite was investigated to decrease the light olefins in motor gasoline while enhancing octane. Etherification activity of several molecular sieve catalysts for FCC light gasoline was studied in a fixed-bed reactor. The influence of pore-enlarging agent (PEG) with different molecular weight, binder (γ-Al₂O₃), and peptizing agent (HNO₃) in the shaping process on etherification activity of Hβ zeolite was studied. The impregnating ways of precursor of oxides and the order of extruding and impregnating were also investigated. The results show that the activity of extruded Hβ zeolite before impregnating precursor of oxides is higher than the reverse order. The best shaping condition obtained was PEG-4000 10%, γ-Al₂O₃ 20%, and HNO₃ 10%. At the optimal reaction condition, the conversion of tert-olefins reached the peak. 62.93%, the yield of TAME, is also high and the technology can be applied to industry as well.     

3-N-丙酰基-2-芳基-5-(3-碘苯基)-1,3,4-(口恶)唑啉类化合物的合成及表征

以3-碘苯甲酸为原料,在浓硫酸作用下与乙醇反应制得3-碘苯甲酸乙酯(1),再以无水乙醇为溶剂,在105℃化合物1与80％的水合肼反应8 h,制得3-碘苯甲酰肼(2)。在无水乙醇中,在90～95℃化合物2分别与4-甲基苯甲醛、2-氯苯甲醛、4-氯苯甲醛、4-羟基苯甲醛、2,4-二氯苯甲醛、4-甲氧基苯甲醛、3-硝基苯甲醛、4-硝基苯甲醛和4-二甲氨基苯甲醛反应得到相应的酰腙[3(a～i)]。最后化合物3(a～i)分别与丙酸酐脱水环化成了3-N-丙酰基-2-芳基-5-(3-碘苯基)-1,3,4-(口恶)唑啉类化合物[4(a～i)],收率分别为86．2％,70．5％, 80．1％,68．2％,62．4％,75．2％,73．2％,70．5％和63．2％。并通过元素分析,IR,1H NMR和MS对化合物4(a～i)的结构进行了表征。