Piezoresistivities of vapor‐grown carbon fiber/silicone foams for tactile sensor applications

Due to the growing demand for tactile sensors, the possibility of detecting an external uniaxial pressure by the piezoresistive measuring of a conductive filler/elastomer composite was investigated. A series of piezoresistive models are discussed. Novel highly sensitive piezoresistive foams with excellent elasticity were fabricated using vapor‐grown carbon fiber (VGCF), two‐component silicone elastomer and a new type of thermally expandable micro beads foaming agent to overcome the disadvantages of the silicone elastomer in the utilization of a tactile sensor. Deformations of the foams caused by uniaxial pressure were observed using scanning electron microscopy from cross‐sections. Effects of the VGCF and the foaming agent on the piezoresistivitiy were investigated. The piezoresistive mechanisms of the foams are discussed according to the measurements, and good fit was found between the theoretical calculations and the experimental piezoresistivity measurements. It is found that the addition of the micro beads foaming agent can improve the piezoresistivity of the VGCF/silicone foam and increase the sensitivity and repeatability for its application in a tactile sensor. © 2016 Society of Chemical Industry     

Oxidation behavior of ytterbium silicide

Si-rich ytterbium silicide was fabricated by through an arc-melting technique for applying use as a bond coat material in an environmental barrier coating system. Evaluation of its potential was accomplished through oxidation tests in dry air and an inert atmosphere. The experimental results showed that the changes in weight and morphologies of ytterbium silicide observed after the tests depended on the oxygen partial pressure. Extensive oxidation and weight gain occurred after oxidation in air. In order to apply this material for hot structures, improvement of the oxidation resistance is needed.     

Recent progress in thermal analysis of polymers: experimental techniques and a new aspect of temperature in measurement of material properties

Thermal analysis has been utilized in polymer research for a long time and its usefulness is widely recognized. High‐performance commercial instruments have driven significant progress in the thermal studies of polymers. On the other hand, new experimental instruments have been developed in laboratories as well. In this paper attention is paid to the latter category. The laboratory‐made instrument focused on the target material and/or phenomena provides data that are not available from other techniques. Experiments using the temperature modulation technique, which has been successfully utilized in laboratory‐made instruments, are introduced in this paper. The temperature modulation technique reveals a new aspect of temperature useful for studies of material properties. © 2016 Society of Chemical Industry     

Mean molal activity coefficients of aqueous scandium chloride, nitrate, bromide and perchlorate solutions at 25.0°

The mean molal activity coefficients of aqueous scandium chloride, nitrate, bromide and perchlorate solutions were determined at 25.0° for dilute to saturated concentrations, together with the activities of water. In the dilute solutions of scandium halides, the activity coefficients were obtained from electromotive force measurements on galvanic cells, and the osmotic coefficients of all four solutions above 0.1 mol kg⁻¹ were determined from the isopiestic measurements. Least-squares equations were fitted to these coefficients, which were then used to calculate the mean molal activity coefficients and water activities. The relationships between these results and the corresponding activity data for other rare earth salts, and to the cation hydration and ionic interactions, are discussed. The results on scandium perchlorate solutions suggested that the inner-sphere hydration number of tervalent scandium ion may be seven.     

Enhanced catalytic activity of nanoshell carbon co-doped with boron and nitrogen in the oxygen reduction reaction

The use of carbon cathode catalysts in polymer electrolyte fuel cells instead of the current platinum catalysts is attracting increasing attention. We claim that two factors are important for enhancing the activity of carbon cathode catalysts in the oxygen reduction reaction (ORR): the formation of a nanoshell structure and co-doping with boron and nitrogen. Herein, we investigate the preparation and characterization of active ORR carbon catalysts that combine the above factors. Boron and nitrogen (BN)-doped nanoshell-containing carbon (BN-NSCC) was prepared by carbonizing a mixture of poly(furfuryl alcohol), cobalt phthalocyanine, melamine, and a trifluoroborane–methanol complex at 1000 °C. Transmission electron microscopy and X-ray photoelectron spectroscopy revealed the formation of nanoshell structures with distorted graphitic layers and the introduction of boron and nitrogen atoms, respectively. The ORR activity was evaluated in oxygen-saturated 0.5 mol dm^?3 H₂SO₄ using Koutecky–Levich analysis. The BN-NSCC showed an eight to ten times higher ORR activity than undoped NSCC, with an increased number of electrons participating in the reaction. Tafel analysis revealed a change in the rate-determining step caused by BN-doping. Thus, the combination of a nanoshell structure and co-doping with boron and nitrogen was found to improve the ORR activity of carbon catalysts.     

Source-Field Relationships for Cardiac Generators on the Heart Surface Based on Their Transfer Coefficients

We consider three different types of equivalent sources over a closed surface enclosing all the electrical cardiac generators: the (in situ) potential, the (in situ) normal current density, and the (macroscopic) transmembrane potential on the heart surface. The last equivalent source, which behaves as a double layer, is derived from the bidomain (bisyncytia) model for anisotropic cardiac muscle. This model predicts that if ratios of intracellular to interstitial conductivity along all directions are equal, field potential can be calculated only using surface integrals. The volume integral arising from the tissue anisotropy of cardiac muscle vanishes in that case. For each type of source under study, we give the field potential in a bounded inhomogeneous volume conductor in the form of an integral equation. We also derive the conditions which the lead field (or the transfer coefficients) must satisfy. The in situ potential and normal current are related to the cardiac sources in a complex way, but their lead fields are independent of conductivity of heart muscle, whereas the transmembrane potential is directly involved as a source term, but the lead field depends on the anisotropy of the heart muscle.     

Automated single nucleotide polymorphism typing using bead array in capillary tube

A low-cost and simple on-site technique for genotyping single nucleotide polymorphisms (SNPs) was developed. The technique is based on allele-specific primer PCR and the recently developed bead arrays in a single tip technique. The performance of the method was verified by genotyping four SNPs that correlate with cardiovascular diseases.     

Slug to annular flow transition during boiloff in a rod bundle under high-pressure conditions

High-pressure boiloff experiments in a wide range of bundle powers by using the Two-Phase Flow Test Facility (TPTF) were conducted. Two kinds of boiloff patterns were observed in these experiments. One is the boiloff pattern in a low bundle power, in which the dryout points of rods locate at a certain elevation in the bundle because the mixture level controls the dryout points. The other is the boiloff pattern in a high bundle power, in which the clear mixture level can not be observed and the dryout points of rods locate in a wide range of vertical directions. The vertical scatter of the dryout points is considered to be due to the break of the thin water film on the heater rods under the annular flow pattern.A simple model to predict the slug to annular flow transition in the rod bundle is proposed. In the model, the slug to annular flow transition takes place when the interferences of the water films on the neighboring rods cease. The model appeares to give good predictions of the previous flow transition experiment conducted in a rod bundle. The slug-annular transition below the dryout points was predicted with the present model in the high power boiloff experiments of TPTF. No slug-annular transition below the dryout points is predicted with the present model in the low power boiloff experiments.     

Identification and field evaluation ofAnomala octiescostata (Coleoptera: Scarabaeidae) sex pheromone

Using GC-EAD, the sex pheromone of the scarab beetleAnomala octiescostata was identified to be a 8:2 binary mixture of (R,Z)-5-(–)-(oct-1-enyl)oxacyclopentan-2-one and (R,Z)-5-(–)-(dec-1-enyl)oxacyclopentan-2-one. These semiochemicals have been also reported as sex pheromone constituents of otherAnomala species, either geographically or seasonally isolated fromA. octiescostata. Synthetic sex pheromone was highly attractive in the field; 0.1 mg captured significantly more males than two virgin females. Buried traps were significantly more attractive than those positioned at 30, 90, and 150 cm above the ground. In a dose-response test (0.1–100 mg), no saturation due to overdose of pheromone was observed, but in most cases, two dosages differing by 10-fold were not significantly different. Response of males to traps baited with different ratios of the two components was tested in two experiments with randomized blocks and Latin-square designs. Deviation from the natural ratio (8:2) of sex pheromone did not significantly diminish the response of males. Peak flight activity of beetle was recorded at 9:00–10:00 AM JST on sunny days in the end of April 1993.Presented in part at the 10th Annual ISCE Meeting, July 31–August 4, 1993, Clearwater Beach, Florida.     

Segregation Effects at Grain Boundaries in Fluorite-Structured Ceramics

The atomic-scale structure, composition, and chemistry of grain boundaries in two fluorite-structured ceramic materials were characterized by a combination of Z -contrast imaging and electron energy-loss spectroscopy (EELS). In the case of a symmetric 24° [001] tilt bicrystal of yttria-stabilized-zirconia (YSZ), a shift in the zirconium M -edge onset and a change in the yttrium and zirconium M -edge ratios at the boundary indicate an increase in the number of electrons in the boundary plane. A detailed study of the structure and composition indicates that this is caused by an increase in the number of oxygen vacancies in the grain boundary core that is partially compensated by yttrium segregation. Studies of grain boundaries in an industrial Gd-doped ceria ceramic reveals similar changes in vacancy/dopant profiles indicating that these effects may be generic to grain boundaries in fluorite-structured materials.