Peroxiredoxin 2 as a chemotherapy responsiveness biomarker candidate in osteosarcoma revealed by proteomics

Purpose : We aimed to identify novel chemotherapy responsiveness biomarkers for osteosarcoma (OS) by investigating the global protein expression profile of 12 biopsy samples from OS patients. Experimental design : Six patients were classified as good responders and six as poor responders, according to the Huvos grading system. The protein expression profiles obtained by 2‐D DIGE consisted of 2250 protein spots. Results : Among them, we identified 55 protein spots whose intensity was significantly different (Bonferroni adjusted p‐value<0.01) between the two patient groups. Mass spectrometric protein identification demonstrated that the 55 spots corresponded to 38 distinct gene products including peroxiredoxin 2 (PRDX 2). Use of a specific antibody against PRDX 2 confirmed the differential expression of PRDX 2 between good and poor responders, while PRDX 2 levels as measured by Western blotting correlated highly with their corresponding 2‐D DIGE values. The predictive value of PRDX 2 expression was further confirmed by examining an additional four OS cases using Western blotting. Conclusions and clinical relevance : These results establish PRDX 2 as a candidate for chemotherapy responsiveness marker in OS. Measuring PRDX 2 in biopsy samples before treatment may contribute to more effective management of OS.     

Multimedia technologies for structuring and retrieval of TV news

Because of the media digitization, a large amount of information such as speech, audio and video data is produced everyday. In order to retrieve data from these databases quickly and precisely, multimedia technologies for structuring and retrieving of speech, audio and video data are strongly required. In this paper, we overview the multimedia technologies such as structuring and retrieval of speech, audio and video data, speaker indexing, audio summarization and cross media retrieval existing today for TV news detabase. The main purpose of structuring is to produce tables of contents and indices from audio and video data automatically. In order to make these technologies feasible, first, processing units such as words on audio data and shots on video data are extracted. On a second step, they are meaningfully integrated into topics. Furthermore, the units extracted from different types of media are integrated for higher functions. Yasuo Ariki, Ph.D.: He is a Professor in the Department of Electronics and Informatics at the Ryukoku University. He received his B.E., M.E. and Ph.D. in information science from Kyoto University in 1974, 1976 and 1979, respectively. He had been an Assistant in Kyoto University from 1980 to 1990, and stayed at Edinburgh University as visiting academic from 1987 to 1990. His research interests are in speech and image recognition and in information retrieval and database. He is a member of IPSJ, IEICE, ASJ, Soc. Artif. Intel. and IEEE.     

An adaptive associative memory system based on autonomous reaction between image memories

To construct a “thinking-like” processing system, a new architecture of an adaptive associative memory system is proposed. This memory system treats “images” as basic units of information, and adapts to the environment of the external world by means of autonomous reactions between the images. The images do not have to be clear, distinct symbols or patterns; they can be ambiguous, indistinct symbols or patterns as well. This memory system is a kind of neural network made up of nodes and links called a localist spreading activation network. Each node holds one image in a localist manner. Images in high-activity nodes interact autonomously and generate new images and links. By this reaction between images, various forms of images are generated automatically under constraints of links with adjacent nodes. In this system, three simple image reaction operations are defined. Each operation generates a new image by combining pseudofigures or features and links of two images. This work was presented, in part, at the Fourth International Symposium on Artificial Life and Robotics, Oita, Japan, January 19–22, 1999     

Comparison between SiO2 films deposited by atomic layer deposition with SiH2[N(CH3)2]2 and SiH[N(CH3)2]3 precursors

Thin SiO₂ layers were deposited by atomic layer deposition (ALD) using either Bis-dimethylamino-silane (BDMAS: SiH₂(N(CH₃)₂)₂) or Tris-dimethylamino-silane (TDMAS: SiH(N(CH₃)₂)₃) precursors. The purpose of this study is to evaluate these precursors for their suitability for ALD of hafnium (Hf)-silicate gate dielectrics. The advantages of these precursors are that the melting points and vapor pressures are moderate. The thickness of SiO₂ deposited using ALD process is controlled by the number of growth cycles and the growth rate was different for each precursor, that for BDMAS being 1.5 times that for TDMAS at the same reactor pressure. The carbon impurity in the SiO₂ film deposited using BDMAS was about half an order of magnitude less than that using for TDMAS. Furthermore, the carbon impurity was reduced to about the detection limit of secondary ion mass spectrometry after high temperature annealing at 1000 °C during 5 s.     

Avoiding Routing Loops on the Internet

Suppose that some particular link in the Internet is currently congested. A natural solution is to try to make packets bypass that link. This can be done by increasing the cost of that link intentionally, say from a ₁ to a ₂, since the Internet uses shortest-path routing. Unfortunately, however, this often causes temporary loops for packet traveling, called routing loops. In this paper we show that routing loops can be avoided by increasing the cost of the link not directly from a ₁ to a ₂ but through an intermediate value, a ₃, i.e., from a ₁ to a ₃ and then to a ₂. We may need several intermediate values. We show that in this case the greedy strategy, namely, raising the cost as much as possible in each step, is optimal.     

Mechanical role of reinforcement in seismic behavior of steel-strip reinforced earth wall

In the current design practices of steel-strip reinforced earth walls (SSREWs), the length of the reinforcing material is determined based on the equilibrium between the reinforcement tension and the earth pressure acting on the wall. Here, the resistance of the reinforcing material laid in the active failure zone (AFZ) is not considered. Moreover, the mechanical role of the reinforcing material against the integrity of the SSREW has not been sufficiently verified. Regarding the seismic stability of SSREW, although it is investigated by treating the entire reinforced earth wall as a rigid body, this inspection method is for gravity-retaining walls, and the difference in the seismic behavior between the SSREW and the rigid body is not clear. In this study, therefore, dynamic centrifuge model tests on 6 types of SSREWs were conducted to clarify the following items: (1) the basic earthquake behavior of a SSREW, (2) the mechanical role of the reinforcing material laid in the AFZ and (3) the mechanical role of the reinforcing material against the integrity of the SSREW. The results indicated that the reinforcing material laid in the AFZ can restrain the amount of deformation of the wall during earthquakes. Furthermore, the more stable the AFZ is, the smaller the maximum wall displacement will be.     

Mumefural and related HMF derivatives from Japanese apricot fruit juice concentrate show multiple inhibitory effects on pandemic influenza A (H1N1) virus

Fruit-juice concentrate of Japanese apricot (Prunus mume Sieb. et Zucc.) has been shown to be effective against influenza A infection in MDCK cells. In this study, we isolated five components from the fruit-juice concentrate of Japanese apricot, 5-(hydroxymethyl)-2-formylfuran (HMF), 1-[5-(2-formylfuryl)methyl]dihydrogen 2-hydroxypropane-1,2,3-tricarboxylate (mumefural, MF), 2-[5-(2-formylfuryl)methyl]dihydrogen 2-hydroxypropane-1,2,3-tricarboxylate (MF‘), 1-[5-(2-formylfuryl)methyl]hydrogen 1-hydroxyethane-1,2-dicarboxylate (MA1) and 2-[5-(2-formylfuryl)methyl]hydrogen 1-hydroxyethane-1,2-dicarboxylate (MA2), and investigated their inhibitory activities against the novel influenza A/Narita/1/2009 (H1N1) pandemic virus hemagglutinin and neuraminidase functions, which are essential for viral attachment and budding, respectively. An hemagglutination inhibition assay indicated that MF and MF‘ were effective at minimum hemagglutination concentrations of 3.1 and 6.3 mM, respectively. An inhibition study for sialidase activity of the neuraminidase spike showed that MF was the most active anti-sialidase compound with an IC₅₀ value of 0.21 ± 0.01 mM, followed by MA2 (IC₅₀, 0.71 ± 0.09 mM), MA1 (IC₅₀, 1.64 ± 0.31 mM) and MF‘(IC₅₀, 1.62 ± 0.22 mM). Furthermore, MF was shown to inhibit the growth of the pandemic virus in a dose-dependent manner (62 ± 3% inhibition at 5 mM). The results suggest that MF, a citric acid ester linked to HMF at the 1-position of the propane backbone, might be a lead compound for the development of anti-influenza A inhibitors.     

一种新型两性界面活性剂的减阻特性

对一种新合成的两性界面活性剂N,N,N-三甲胺-N′-油酸酰亚胺在二维通道内的减阻特性进行了实验研究.为了能进行低温测试,以20%的甘醇不冻液为溶剂.溶液质量浓度范围为（5×10^-5）～（1×10^-3）,测试温度为-5℃和25℃.用粒子成像测速仪对减阻流动的湍流特性进行了测量.实验表明,这种新型界面活性剂溶液呈现明显减阻特性,且减阻特性与浓度和温度均有很大的关系,最大减阻值可高达83%.该界面活性剂中加入NaNO₂,在低温和低浓度条件下能有效改善减阻效果,而在常温和高浓度条件下反而降低减阻效果.添加界面活性剂抑制了湍流速度脉动和湍流涡脉动,使雷诺剪切应力完全消失.     

Mechanical and physical properties of epoxy composites reinforced by vapor grown carbon nanofibers

Epoxy/vapor grown carbon nanofiber composites (VGCF) with different proportions of VGCF were fabricated by the in situ process.The VGCFs were well dispersed in both of the low and high viscosity epoxy matrices, although occasional small aggregates were observed in a high viscosity epoxy of 20 wt.%. The dynamic mechanical behavior of the nanocomposite sheets was studied. The storage modulus and the glass transition temperature (T_g) of the polymer were increased by the incorporation of VGCFs.The electrical and mechanical properties of the epoxy-VGCFs nanocomposite sheets with different weight percentages of VGCFs were discussed. The results were that both had maximum tensile strength and Young’s modulus at 5 wt.% for both materials and reduced the fracture strain with increasing filler content. The electrical resistivity was decreased with the addition of filler content. Mechanical, electrical and thermal properties of low viscosity epoxy composites were resulted better than that of the high viscosity composites.