The thermal ignition of lignocellulosics in infinite slab and cubic geometries

Wood shaving samples were heated in both cubic baskets and in a previously described system realising the conditions of the ‘infinite slab’ in thermal ignition. Results from the two sets of experiment were found to be totally consistent with each other.     

A kinematic analysis of the modified flight telerobotic servicer manipulator system

A reverse analysis of a 6 degree of freedom (dof) subchain of a modified 7 dof flight telerobotic servicer (FTS) manipulator system is presented. The 6 dof subchain is designated as a TR-RT* chain. At the outset, it was considered that the reverse analysis would be similar to a TTT manipulator analyzed previously for which the third and fourth joints intersect at a finite point. This was not, however, the case and a sixteenth-degree tan-half-angle polynomial was derived for the TR-RT manipulator. The elimination procedure is interesting and much simpler than the procedures for the general case.     

Predictors of individual differences in mail-coding skills and their variation with ability level.

Personality and cognitive predictors of mail coding were investigated in 2 samples, 1 of high coding ability (N?=?56) and 1 of mixed ability (N?=?158). Two approaches to predicting correlates of skill within groups of differing ability were compared: P. L. Ackerman's (1988) ability theory and D. A. Norman and T. Shallice's (1985) account of levels of action control. The predictors of mail-coding skill varied with ability: Personality variables were more predictive among higher ability Ss, and cognitive measures were more predictive among lower ability Ss. Implications of the findings for theories of individual differences in skill are discussed. There were 2 main practical conclusions. First, the measures used were more predictive than a standard psychometric selection test. Second, correlates of skill may be different among unselected job applicants and among the subset of applicants hired for subsequent operational training. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Embedded micromachined fiber-optic Fabry-Perot pressure sensors in aerodynamics applications

Small size, high bandwidth pressure sensors are required for instrumentation of probes and test models in aerodynamic studies of complex unsteady flows. Optical-fiber pressure sensors promise potential advantages of small size and low cost in comparison with their electrical counterparts. We describe miniature Fabry-Perot cavity pressure sensors constructed by micromachining techniques in a turbine test application. The sensor bodies are 500 /spl mu/m squared, 300 /spl mu/m deep with a /spl sim/2 /spl mu/m-thick copper diaphragm electroplated on one face. The sensor cavity is formed between the diaphragm and the cleaved end of a single mode fiber sealed to the sensor by epoxy. Each sensor is addressed interferometrically in reflection by three wavelengths simultaneously, giving an unambiguous phase determination; a pressure sensitivity of 1.6 radbar/sup -1/ was measured, with a typical range of vacuum to 600 kPa. Five sensors were embedded in the trailing edge of a nozzle guide vane installed upstream of a rotor in a full-scale turbine stage transient test facility. Pressure signals in the trailing edge flow show marked structure at the 8 kHz blade passing frequency. To our knowledge, this is the first report of sensors located at the trailing edge of a normal-sized turbine blade.     

Water absorption properties of phosphate glass fiber‐reinforced poly‐ϵ‐caprolactone composites for craniofacial bone repair

The moisture uptake of polymers and composites has increasing significance where these materials are specified for invasive, long‐term medical applications. Here we analyze mass gain and the ensuing degradation mechanisms in phosphate glass fiber reinforced poly‐?‐caprolactone laminates. Specimens were manufactured using in situ polymerization of ?‐caprolactone around a bed of phosphate glass fibers. The latter were sized with 3‐aminopropyltriethoxysilane to control the rate of modulus degradation. Fiber content was the main variable in the study, and it was found that the moisture diffusion coefficient increased significantly with increasing fiber volume fraction. Diffusion, plasticization, and leaching of constituents appear to be the dominant aspects of the process over these short‐term tests. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Performance evaluation of a biotrickling filter degrading mixtures of hydrophobic and hydrophilic compounds

The removal of a mixture of painting solvents from waste air using a biofiltration process was evaluated in this project. The pollutants removed included hydrophobic (aromatic hydrocarbons) and hydrophilic (water soluble ketones and esters) compounds. A trickle bed reactor with a defined immobilized mixed culture on polyethylene Pall rings was utilized in this biodegradation study. The removal efficiencies (RE) of the individual groups of pollutants during loading experiments were determined. An increase of the aromatic hydrocarbons loading resulted in a drop of their RE_AROM with no effect on the RE value of ketones. The overloading of ketones caused a rapid drop in RE_AROM and a small drop in RE_KET. To achieve a restoration of the biocatalyst degradation properties after the increase in loading, an addition of phosphate to the aqueous medium was implemented which successfully restored the removal efficiency.     

Maternal depression and early positive parenting predict future conduct problems in young children with attention-deficit/hyperactivity disorder.

Children with attention-deficit/hyperactivity disorder (ADHD) are at risk for adverse outcomes such as substance abuse and criminality, particularly if they develop conduct problems. Little is known about early predictors of the developmental course of conduct problems among children with ADHD, however. Parental psychopathology and parenting were assessed in 108 children who first met Diagnostic and Statistical Manual of Mental Disorders (4th ed.) criteria for ADHD at 4-7 years old. When demographic variables and baseline ADHD and conduct problems were controlled, maternal depression predicted conduct problems 2-8 years following the initial assessment, whereas positive parenting during the structured parent- child interaction task predicted fewer future conduct problems. These findings suggest that maternal depression is a risk factor, whereas early positive parenting is a protective factor, for the developmental course of conduct problems among children with ADHD. (PsycINFO Database Record (c) 2010 APA, all rights reserved)