Nanostructured polymer blends: Synthesis and structure

Nanostructured polymer blends prepared via anionic ring opening polymerizations of cyclic monomers in the presence of a pre-made polymer melt exhibit a number of special properties over traditional polymer blends and homopolymers. Here, we report on a simple and versatile method of in situ polymerization of macrocyclic carbonates in the presence of a maleic anhydride polypropylene (mPP) matrix and a surface-active compatibilizer (i.e. PC grafted onto a mPP backbone generated in situ) to yield a micro- and nanostructured polymer blends consisting of a polycarbonate (PC) minor phase, and a polypropylene (PP) major phase. By varying the processing conditions and concentration of the macrocyclic carbonate it was possible to reduce the size of the PC dispersions to an average minor diameter of 150 nm. NMR and TEM characterizations indicate that the PC dispersions do not influence crystal content in the PP phase. Overall, the results point to a simple strategy and versatile route to new polymeric materials with enhanced benefits.     

A Simulation Study of Clock Recovery in QPSK and 9QPRS Systems

Computer simulation is employed to assess jitter performance of a clock recovery circuit as a function of the characteristics of the rectifier being used. Several types of rectifiers are compared, some operating at baseband, others at intermediate frequency (IF). It is shown that the best choice between them depends both on the modulation format and on the excess bandwidth factor of the pulse spectrum. In QPSK systems, fourth-law rectifiers outperform the others for rolloff factors up to 0.2 while, for higher values, baseband absolutevalue rectifiers are preferable. In the case of 9QPRS, baseband absolutevalue rectifiers provide jitter reductions of one order of magnitude at high signal-to-noise ratios.     

Techno-economic study of different alternatives for biodiesel production

Biodiesel has become an attractive diesel fuel substitute due to its environmental benefits since it can be made from renewable resource. However, the high costs surrounding biodiesel production remains the main problem in making it competitive in the fuel market either as a blend or as a neat fuel. More than 80% of the production cost is associated with the feedstock itself and consequently, efforts are focused on developing technologies capable of using lower-cost feedstocks, such as recycled cooking oils and wastes from animal or vegetable oil processing operations.     

Hiding biometric data

With the wide spread utilization of biometric identification systems, establishing the authenticity of biometric data itself has emerged as an important research issue. The fact that biometric data is not replaceable and is not secret, combined with the existence of several types of attacks that are possible in a biometric system, make the issue of security/integrity of biometric data extremely critical. We introduce two applications of an amplitude modulation-based watermarking method, in which we hide a user's biometric data in a variety of images. This method has the ability to increase the security of both the hidden biometric data (e.g., eigen-face coefficients) and host images (e.g., fingerprints). Image adaptive data embedding methods used in our scheme lead to low visibility of the embedded signal. Feature analysis of host images guarantees high verification accuracy on watermarked (e.g., fingerprint) images.     

Schwingfestigkeit von Schraube‐Mutter‐Verbindungen

High cycle fatigue of bolted connections Extensive tests regarding the influences on the fatigue of bolt‐nut‐connections of preloading with torsion, of preloading with yielding, of loading with superimposed bending and of the tested lot are processed. These influences are not yet known according to VDI 2230. New testing devices were designed for these tests, which allow a far less expensive operation and may easily be used for bolts of diameters up to M100 and testing frequencies up to 1000 Hz. The validity of fatigue resistance according to VDI 2230 is specified with respect to the test results. The determined influence of the tested lots is unexpectedly high. The manufacturing process of bolts should be improved to minimize this influence.     

Etching behavior of CVD zinc selenide in inorganic acid solutions

Chemical interaction between polished surfaces of polycrystalline zinc selenide and inorganic acid solutions of various concentrations has been studied.     

Femtochemistry of Guest Molecules Hosted in Colloidal Zeolites

The ultrafast deprotonation of 2‐(2′‐hydroxyphenyl)benzothiazole (HBT) hosted in nanometer‐sized FAU and MFI zeolites is reported. Samples are prepared via in‐situ incorporation of HBT in the precursor colloidal solutions resulting in the formation of nanometer‐sized zeolites under hydrothermal treatment. The diameter of the zeolite particles formed in the crystalline suspensions is determined by dynamic light scattering and high‐resolution transmission microscopy to lie in the range 40–100 nm. It is shown that the HBT loading does not influence the degree of the zeolite crystallinity but does change the size and the morphology of the individual zeolite nanoparticles. Colloidal suspensions containing the crystalline nanoparticles are well suited for optical investigations since they are sufficiently transparent and clear. The photochemical properties of the HBT guest in the zeolite‐host systems are studied with femtosecond transient transmission spectroscopy. Depending on the acid–base properties either the enol or the keto tautomer of HBT is found to be hosted in the internal voids of the zeolites; upon UV excitation, the HBT‐keto tautomer is converted to the enol form in both MFI‐ and FAU‐type hosts. The HBT photoconversion takes place via an ultrafast deprotonation within 1.5 ps as detected by femtosecond transient absorption spectroscopy.     

Low Electrical Percolation Threshold of Silver and Copper Nanowires in Polystyrene Composites

Silver and copper nanowires have been synthesized using a scalable method of AC electrodeposition into porous aluminum oxide templates, which produces gram quantities of metal nanowires ca. 25 nm in diameter and up to 5 and 10 μm in length for Ag and Cu, respectively. The nanowires have been used to prepare polystyrene nanocomposites by solution processing. Electrical resistivity measurements performed on polymer nanocomposites containing different volume fractions of metal indicate that low percolation thresholds of nanowires are attained between compositions of 0.25 and 0.75 vol %.     

Maximum likelihood estimation of constellation vectors for blindseparation of co-channel BPSK signals and its performance analysis

In this paper, we present a method for blind separation of co-channel BPSK signals arriving at an antenna array. This method consists of two parts: the maximum likelihood constellation estimation and assignment. We show that at high SNR, the maximum likelihood constellation estimation is well approximated by the smallest distance clustering algorithm, which we proposed earlier on heuristic grounds. We observe that both these methods for estimating the constellation vectors perform very well at high SNR and nearly attain Cramer-Rao bounds. Using this fact and noting that the assignment algorithm causes negligible error at high SNR, we derive upper bounds on the probability of bit error for the above method at high SNR. These upper bounds fall very rapidly with increasing SNR, showing that our constellation estimation-assignment approach is very efficient. Simulation results are given to demonstrate the usefulness of the bounds