CHANGES OF RHEOLOGICAL PROPERTIES OF APPLE TISSUE UNDERGOING CONVECTIVE DRYING

ABSTRACT

The aim of this work was to investigate rheological properties of apple cubes undergoing convective drying. Compression-relaxation test was used to follow changes of properties under investigation.

Raw apple appeared to be very heterogeneous material from the rheological point of view. The relationship between stress and strain was concave downwards and the concavity increased until water content of 2·5 g/g d.m. was reached. Then the relationship begun to straighten and for dry material developed stress was linearly dependent on strain. The resistance of deformation decreased with decreasing water content. Analysis of relaxation showed that the rate of relaxation increased with decreasing water content and the unrelaxed stress was smaller the lower was the water content.

Apple cubes undergoing drying are pictured as material composed of three compartments with different rheological properties. The outer layer is dry, inelastic and difficult to deform. Underneath is moist material with no turgor and relatively easy to compress, and the core with properties of raw apples. During drying the second layer grows in expense of the core and porous structure with many voids filled with air is formed. Share of each compartment in the volume of apple cube undergoing drying affects average rheological properties of the material.     

Evaluation of quadratic cost functionals for neutral systems: the frequency-domain approach

As shown in Grabowski (1983), the problem of evaluation of the quadratic performance index for delay-differential systems of neutral type can be effectively solved by the use of Lyapunov functionals. In this paper another solution to that problem, based on the frequency-domain approach, is proposed. With the use of Plancherel's theorem and other tools of complex analysis, this task is reduced to a Riemann-Hilbert problem, an explicit solution to which is found by elementary methods. Our results can be regarded as a generalization of those due to Walton and Marshall (1984, 1987). Two simple examples of application are also provided.     

A two-pronged approach for springback variability assessment using sparse polynomial chaos expansion and multi-level simulations

In this study, we show that stochastic analysis of metal forming process requires both a high precision and low cost numerical models in order to take into account very small perturbations on inputs (physical as well as process parameters) and to allow for numerous repeated analysis in a reasonable time. To this end, an original semi-analytical model dedicated to plain strain deep drawing based on a Bending-Under-Tension numerical model (B-U-T model) is used to accurately predict the influence of small random perturbations around a nominal solution estimated with a full scale Finite Element Model (FEM). We introduce a custom sparse variant of the Polynomial Chaos Expansion (PCE) to model the propagation of uncertainties through this model at low computational cost. Next, we apply this methodology to the deep drawing process of U-shaped metal sheet considering up to 8 random variables.     

Decision trees for uplift modeling with single and multiple treatments

Most classification approaches aim at achieving high prediction accuracy on a given dataset. However, in most practical cases, some action such as mailing an offer or treating a patient is to be taken on the classified objects, and we should model not the class probabilities themselves, but instead, the change in class probabilities caused by the action. The action should then be performed on those objects for which it will be most profitable. This problem is known as uplift modeling, differential response analysis, or true lift modeling, but has received very little attention in machine learning literature. An important modification of the problem involves several possible actions, when for each object, the model must also decide which action should be used in order to maximize profit. In this paper, we present tree-based classifiers designed for uplift modeling in both single and multiple treatment cases. To this end, we design new splitting criteria and pruning methods. The experiments confirm the usefulness of the proposed approaches and show significant improvement over previous uplift modeling techniques.     

Power system stability enhancement by WAMS-based supplementary control of multi-terminal HVDC networks

This paper deals with supplementary control of a MTDC network designed for the stability enhancement of a AC power system. The proposed control is a WAMS-based control modulating the real and reactive power at the terminals of the DC network. Relevant control formulas have been derived for a linear multi-machine system model with the application of the direct Lyapunov method. Validity and robustness of the proposed control has been verified by computer simulation for a multi-machine test system using a nonlinear model and detailed modeling of power system components. The proposed control is robust and insensitive to changes in the network configuration and loading conditions in the AC power system. In the case, when more of the MTDC networks and/or the HVDC links are used in one interconnected power system the proposed stabilizing control produces additive damping i.e. each controlled network element contributes to the positive damping. Some practical aspects have also been discussed. The proposed WAMS-based stabilizing control of the MTDC network is innovative by both its main concept and the derivation of control formulas using the direct Lyapunov method.     

Online version of the theorem of Thue

A sequence S is nonrepetitive if no two adjacent blocks of S are the same. In 1906 Thue proved that there exist arbitrarily long nonrepetitive sequences over 3 symbols. We consider the online variant of this result in which a nonrepetitive sequence is constructed during a play between two players: Bob is choosing a position in a sequence and Alice is inserting a symbol on that position taken from a fixed set A. The goal of Bob is to force Alice to create a repetition, and if he succeeds, then the game stops. The goal of Alice is naturally to avoid that and thereby to construct a nonrepetitive sequence of any given length.We prove that Alice has a strategy to play arbitrarily long provided the size of the set A is at least 12. This is the online version of the theorem of Thue. The proof is based on nonrepetitive colorings of outerplanar graphs. On the other hand, one can prove that even over 4 symbols Alice has no chance to play for too long. The minimum size of the set of symbols needed for the online version of Thue?s theorem remains unknown.     

Hydrogen Evolution on Binary and Ternary Cobalt Alloys Deposited With Superimposed Magnetic Field

The article presents results of electrodeposition of Co-Mo Co-Mo-C alloys in a magnetic field characterized by low overvoltage of hydrogen evolution.Addition of molybdenum and carbon was to lower the values of overvoltage of hydrogen evolution on cobalt.The influence of bath pH,bath composite,current density and magnetic field with different orientation on the deposits composition,structure and overpotential for hydrogen evolution reaction(HER)was determined.Electrocatalytic properties of the obtained alloy coatings within the range of hydrogen evolution were tested in a concentrated NaOH solution.The comparison of electrocatalytic properties of Co-Mo alloys with properties of Co-Mo-C ones enabled determining the influence of carbon presence in cathodic deposits on the overpotential values for hydrogen evolution.     

Numerical assessment of springback for the deep drawing process by level set interpolation using shape manifolds

In this paper, we introduce an original shape representation approach for post-springback characterization based on the automatic generation of parameterized level set functions. The central idea is the concept of the shape manifold representing the design domain in the reduced-order shape-space. Performing Proper Orthogonal Decomposition on the shapes followed by using the Diffuse Approximation allows us to efficiently reduce the problem dimensionality and to interpolate uniquely between admissible input shapes, while also determining the smallest number of parameters needed to characterize the final formed shape. We apply this methodology to the problem of springback assessment for the deep drawing operation of metal sheets.