Design challenges of a 65 nm CMOS stacked folded differential PA structure for mobile communications

In this paper, a novel phase-locked loop (PLL) architecture with multiple charge pumps, which is used to design a fast-locking PLL and a low-phase-noise PLL, is proposed. The effective capacitance and resistance of the loop filter in terms of voltage is scaled up/down according to the locking status by controlling the magnitude and direction of the charge pump current. Two PLLs, one with a fast-locking characteristic and the other with a low-phase-noise characteristic, are designed and fabricated in a 0.35-μm CMOS process based on the proposed architecture. The fast-locking PLL has a locking time of less than 6 μs and a phase noise of −90.45 dBc/Hz at 1 MHz offset. The low-phase-noise PLL has a locking time of 25 μs, a phase noise of −105.37 dBc/Hz at 1 MHz offset, and a reference spur of −50 dBc. Both PLLs have an 851.2 MHz output frequency.     

Topical Capsaicin in Poly(lactic-co-glycolic)acid (PLGA) Nanoparticles Decreases Acute Itch and Heat Pain

Background: Capsaicin, the hot pepper agent, produces burning followed by desensitization. To treat localized itch or pain with minimal burning, low capsaicin concentrations can be repeatedly applied. We hypothesized that alternatively controlled release of capsaicin from poly(lactic-co-glycolic acid) (PLGA) nanoparticles desensitizes superficially terminating nociceptors, reducing burning. Methods: Capsaicin-loaded PLGA nanoparticles were prepared (single-emulsion solvent evaporation) and characterized (size, morphology, capsaicin loading, encapsulation efficiency, in vitro release profile). Capsaicin-PLGA nanoparticles were applied to murine skin and evaluated in healthy human participants (n = 21) for 4 days under blinded conditions, and itch and nociceptive sensations evoked by mechanical, heat stimuli and pruritogens cowhage, β-alanine, BAM8-22 and histamine were evaluated. Results: Nanoparticles (loading: 58 µg capsaicin/mg) released in vitro 23% capsaicin within the first hour and had complete release at 72 h. In mice, 24 h post-application Capsaicin-PLGA nanoparticles penetrated the dermis and led to decreased nociceptive behavioral responses to heat and mechanical stimulation (desensitization). Application in humans produced a weak to moderate burning, dissipating after 3 h. A loss of heat pain up to 2 weeks was observed. After capsaicin nanoparticles, itch and nociceptive sensations were reduced in response to pruritogens cowhage, β-alanine or BAM8-22, but were normal to histamine. Conclusions: Capsaicin nanoparticles could be useful in reducing pain and itch associated with pruritic diseases that are histamine-independent.     

Health burden of road traffic accidents,an analysis of clinical data on disability and mortality exposure rates in Flanders and Brussels

Statistics on road traffic accidents (RTAs) mainly come from police records. The police reported RTA statistics however are known to have a large degree of under-registration, underestimating the true risk of being injured in traffic accidents. The use of medical based datasets can provide a more accurate estimate of the actual traffic accident health risk. Exposure-based rates of the actual burden from Flanders and Brussels were calculated, comparing differences between road user, age, gender and type of injury sustained. Minimal Clinical Data (MCD) was selected for the years 2003–2007, as well as data from the mortality statistics. Disability Adjusted Life Years (DALY) were calculated and put into perspective with the passenger kilometres travelled.     

Nanometric Scale Investigation of Phase Transformations in Advanced Steels for Automotive Application

The current trend toward producing lighter vehicles in the automotive industry is driven by the need to conform to the new exhaust emission control regulations. This objective presents a challenge to steel manufacturers. The difficulty lies in designing new alloys with an optimum strength/formability/cost balance for the various components. Here, the key to success lies in controlling the steel microstructure and especially the phase transformations at the smallest possible scale. Among the different alloying elements, light elements such as carbon and boron are of prime importance due to their major effects on the kinetics of phase transformations. Characterization tools combining high spatial and analytical resolution such as secondary ion mass spectrometry (SIMS) and field emission gun-transmission electron microscopy (TEM) were used. In this article, the examples presented are as follows. (1) Boron segregation and precipitation effects to control hardenability in martensitic steels. (2) Local carbon distribution in advanced high-strength steels, with a specific emphasis on martensite tempering. Links have been established between the boron and carbon distribution and the formability.     

Thermal Resonance at the Microscale in AC Scanning Thermal Microscopy with a Thermal-Resistive Probe

Investigation of the thermal-resistive probe response in an AC scanning thermal microscope (SThM) as a function of the distance probe–material surface under ambient conditions and the current excitation frequency is presented. The analysis of temperature experimental results points out a phenomenon which can be interpreted as a thermal wave resonance. The modeling of the thermal response with the finite element method considering the surrounding medium as a thermally conducting medium tends to confirm this. This phenomenon is independent of the sample nature and is related to the thermal diffusion length of the air medium between the probe and the sample. An equivalent resonance factor is defined: it shows a linear dependence with the characteristic distance for which the thermal resonance phenomenon is an extremum. The system—probe/sample surface—behaves as a resonant cavity at the microscale. This configuration is not specific to a SThM and can occur within electronic devices.     

A linear 60 GHz 65 nm-CMOS power amplifier realization and characterization for OFDM signal

A millimeter-wave Power Amplifier (PA) based on a 65nm CMOS technology from STMicroelectronics has been designed. The targeted feature is the unlicensed band around 60 GHz suitable for wireless personal area network application (WPAN). To optimize the linearity, the PA is designed under class A biasing to have an output compression point (OCP₁) close to its saturated Power (P _sat). S-parameters and large signal measurement results are demonstrated and compared with electromagnetic simulations. The PA offers a P _sat of 8.3 dBm, an OCP₁ of 6 dBm and a gain of 6.7 dB. The die area is 0.29 mm² with pads. Considering those results, one-tone simulations are not sufficient to characterize the linearity performances of the PA in its real conditions of use. Consequently, two-tone simulations are firstly performed. After, linearity figures of merit (FoM) are discussed applying an orthogonal frequency-division multiplexing (OFDM) modulated signal. The PA offers an adjacent channel power ratio (ACPR) of 15 dB and an error vector magnitude (EVM) of 20% at PA compression operating mode.     

In-Situ Analyzing the Influence of Thermoelectromagnetic Convection on the Nucleation Ahead of the Advancing Interface During Directional Solidification

Sn-3wt%Pb alloy was directionally solidified without and with a 0.08T transverse magnetic field(TMF),and real-time recorded by in-situ synchrotron X-ray imaging.Results indicate that TMF shortened the distance from the location of nucleation to the advancing interface,and accelerated the growth rate of the equiaxed crystal,which caused the columnar-to-equiaxed transition(CET)finally.The thermoelectromagnetic convection(TEMC)in front of the interface and around the crystal’s dendritic branch should respond to changes of the distance and the growth rate.     

An optimal control of a wastewater treatment reactor by catalytic ozonation

This paper deals with the control of a wastewater treatment pilot by catalytic ozonation. In general, catalytic ozonation processes operate with a deliberate ozone overproduction to obtain a treated water which respects discharge standards. But, in this case, the oxygen consumption is not optimal and the operating costs are important. The objective of this study focuses on the optimization of the catalytic ozonation reactor. A continuous-time transfer function model is identified to represent the pilot behavior, and an optimal control is proposed to obtain a significant abatement of the pollutant. In this application, the pollutant abatement is represented by the absorbance.     

CIGI2011: A heuristic method for resource-constrained project scheduling with activity overlapping

The overlapping of activities is a common practice to accelerate the execution of engineering projects. This technique consists in executing in parallel two activities, normally executed in a sequential way, by allowing the downstream activity to start before the end of the upstream activity based on preliminary information. In this paper, we propose a constructive heuristic for the resource-constrained project scheduling problem with overlapping modes (RCPSP-OM). Given a set of activities to execute, the RCPSP-OM consists in determining the order of execution in time of a set of activities so as to minimize the total project duration, while respecting precedence relations, resource constraints and overlapping possibilities. The heuristic implies that rework tasks related to overlapping are added to downstream activities and that the consumption of the resources is constant throughout the execution of the project (including rework). The method also considers that the possible overlapping modes for every couple of activities and the duration of rework tasks associated with every mode are known in advance. Results show that, when the objective consists in minimizing the project duration, the consideration of the costs associated to activity overlapping allows to significantly reducing the cost of reworks. On the other hand, when the objective consists in maximizing the gains related to the project execution, the search for the best trade-off between acceleration and increase of project costs enables to avoid losses.     

Individual and area socioeconomic inequalities in cause-specific unintentional injury mortality: 11-Year follow-up study of 2.7 million Canadians

This study investigated the association between individual and area socioeconomic status (SES) and leading causes of unintentional injury mortality in Canadian adults. Using the 1991–2001 Canadian Census Mortality Follow-up Study cohort (N = 2,735,152), Cox proportional hazard regression was used to calculate hazard ratios and 95% confidence intervals for all-cause unintentional injury, motor vehicle collision (MVC), fall, poisoning, suffocation, fire/burn, and drowning deaths. Results indicated that associations with SES differed by cause of injury, and were generally more pronounced for males. Low education was associated with an elevated risk of mortality from all-cause unintentional injury and MVC (males only) and poisoning and drowning (both sexes). Low income was strongly associated with most causes of injury mortality, particularly fire/burn and poisoning. Having no occupation or low occupational status was associated with higher risks of all-cause injury, fall, poisoning and suffocation (both sexes) and MVC deaths among men. Associations with area deprivation were weak, and only areas with high deprivation had elevated risk of all-cause injury, MVC (males only), poisoning and drowning (both sexes). This study reveals the importance of examining SES differentials by cause of death from a multilevel perspective. Future research is needed to clarify the mechanisms underlying these differences to implement equity-oriented approaches for reducing differential exposures, vulnerability or consequences of injury mortality.