Interrogating the Tailoring Steps of Pactamycin Biosynthesis and Accessing New Pactamycin Analogues

Pactamycin is a bacteria‐derived aminocyclitol antibiotic with a wide‐range of biological activity. Its chemical structure and potent biological activities have made it an interesting lead compound for drug discovery and development. Despite its unusual chemical structure, many aspects of its formation in nature remain elusive. Using a combination of genetic inactivation and metabolic analysis, we investigated the tailoring processes of pactamycin biosynthesis in Streptomyces pactum. The results provide insights into the sequence of events during the tailoring steps of pactamycin biosynthesis and explain the unusual production of various pactamycin analogues by S. pactum mutants. We also identified two new pactamycin analogues that have better selectivity indexes than pactamycin against malarial parasites.     

Effect of Material Inhomogeneity on Thermal Performance of a Rheocast Aluminum Heatsink for Electronics Cooling

The relation between microstructural inhomogeneity and thermal conductivity of a rheocast component manufactured from two different aluminum alloys was investigated. The formation of two different primary α-Al particles was observed and related to multistage solidification process during slurry preparation and die cavity filling process. The microstructural inhomogeneity of the component was quantified as the fraction of α ₁-Al particles in the primary Al phase. A high fraction of coarse solute-lean α ₁-Al particles in the primary Al phase caused a higher thermal conductivity of the component in the near-to-gate region. A variation in thermal conductivity through the rheocast component of 10% was discovered. The effect of an inhomogeneous temperature-dependent thermal conductivity on the thermal performance of a large rheocast heatsink for electronics cooling in an operation environment was studied by means of simulation. Design guidelines were developed to account for the thermal performance of heatsinks with inhomogeneous thermal conductivity, as caused by the rheocasting process. Under the modeling assumptions, the simulation results showed over 2.5% improvement in heatsink thermal resistance when the higher conductivity near-to-gate region was located at the top of the heatsink. Assuming homogeneous thermo-physical properties in a rheocast heatsink may lead to greater than 3.5% error in the estimation of maximum thermal resistance of the heatsink. The variation in thermal conductivity within a large rheocast heatsink was found to be important for obtaining of a robust component design.     

Synthesis of Co3O4 @ Organo/Polymeric Bentonite Structures as Environmental Photocatalysts and Antibacterial Agents for Enhanced Removal of Methyl Parathion and Pathogenic Bacteria

Two green nanocomposites of Co₃O₄ decorated CTAB/bentonite (Co@CT/BE) and chitosan/bentonite (Co@CH/BE) were synthesized as enhanced and environmental photocatalysts and antibacterial agents. As photocatalysts, the products were applied in the effective oxidation of toxic methyl parathion pesticide (MP) in wastewater under a visible light source. The application of Co@CH/BE (0.02 g) resulted in the complete oxidation of MP (50 mg/L) after 40 min and complete mineralization after 60 min. while the complete oxidation and mineralization of MP (50 mg/L) by Co@CT/BE was recognized after 75 min and 100 min, respectively. The Co@CH/BE composite is of higher activity than Co@CT/BE and can cause complete oxidation for MP at high concentrations up to 100 mg/L after 75 min. The oxidation pathway was illustrated considering the existence of the hydroxyl radicals as the active oxidizing species and the identified secondary organic compounds during the oxidation tests. The detected intermediate converted into end products of CO₂ and inorganic anions of SO₄^?2, NO₃^?, and PO₄^?3 at the final stages of the oxidation processes. As antibacterial agents, the two composites exhibit considerable inhabitation zones of about 20 mm against both the Gram-positive Staphylococcus aureus and Gram-negative bacterium Vibrio Sp. The synthetic Co@CH/BE showed the best antibacterial properties with 200 μg/mL as minimum inhibitory against Staphylococcus aureus.

     

Correction to: Synthesis of Co3O4 @ Organo/Polymeric Bentonite Structures as Environmental Photocatalysts and Antibacterial Agents for Enhanced Removal of Methyl Parathion and Pathogenic Bacteria

Journal of Inorganic and Organometallic Polymers and Materials -     

The effect of substrate surface integrity on the surface properties of TiCrN coating applied via the CAE-PVD method

This study aims to investigate how the predeposition machining processes such as magnetic grinding, turning machining, and wire electrical discharge machining can influence the surface properties including electrochemical and tribological behavior of TiCrN nanostructured coating applied on Mo40 steel substrate. A physical vapor deposition technique using cathodic arc evaporation was used to apply the coating. The crystallographic phases and the microstructure of the coating were studied by X-ray diffraction and scanning electron microscope, respectively. Rockwell-C, electrochemical impedance spectroscopy and potentiodynamic polarization, and pin-on-disk wear tests were employed to evaluate the adhesion strength, corrosion behavior, and tribological property of specimens, respectively. The electrochemical results after 24 h of exposure to 3.5 wt% NaCl solution showed that TiCrN coating pretreated with a turning process with polarization resistance of about 3525.32 Ω.cm² had the best corrosion resistance among all specimens. This was because of the improvement of the smoothness, surface quality, and adhesion after the turning process. On the other, the friction coefficient of the grounded sample is less than that of other ones. This is probably due to its higher adhesion strength and higher surface smoothness.     

Rolling element bearings absolute life prediction using modal analysis

In this paper, the authors introduce an experimental procedure for predicting the fatigue life of each individual rolling element bearing separately using vibration modal analysis. The experimental procedure was developed based on a statistical analysis. A statistical analysis was performed to find an empirical model that correlates the dynamic load capacity of rolling bearings to their dynamic characteristics (Natural frequencies and damping). These dynamic characteristics are obtained from the frequency response function of each individual bearing that results from vibration modal analysis. A modified formula to the already known Lundberg-Palmgren life formula is proposed for rolling element bearings. Given the modified formula, one can predict the fatigue life of each individual rolling element bearing based on its dynamic characteristics. The paper compares the results from the modified formula with those from Lundberg-Palmgren formula. The modified formula provides an accurate prediction for the fatigue life of each individual bearing based on its dynamic characteristics. The experimental validation of the modified formula is considered for future work. Therefore, it can be used in various applications of rolling element bearings in machinery systems.     

Recycling of glass in synthesis of MCM-48 mesoporous silica as catalyst support for Ni<Subscript>2</Subscript>O<Subscript>3</Subscript> photocatalyst for Congo red dye removal

Glass was successfully recycled in the synthesis of mesoporous silica MCM-48 which was used as catalyst support for nickel oxide photocatalyst. The resulted products were evaluated using X-ray diffraction, scanning electron microscope and UV–Vis spectrophotometer. The precipitated nickel oxide is of Ni₂O₃ form and loading of it onto MCM-48 resulted in a reduction in the band gap energy from about 3.66 eV to about 2.4 eV. The role of MCM-48 as catalyst support for Ni₂O₃ in enhancing the adsorption capacity and photocatalytic properties of nickel oxide was evaluated through series of equilibrium studies and photocatalytic degradation of Congo red dye under visible light. Using of glass-based MCM-48 as catalyst support for Ni₂O₃ showed enhancing the adsorption capacity by 31.3 and 14.8% higher than the adsorption capacity of Ni₂O₃ and MCM-48, respectively. Also, the photocatalytic degradation percentage increased by about 67.3% relative to the Ni₂O₃ degradation percentage. The nature of MCM-48/Ni₂O₃ adsorption mechanism is chemisorption and occurs in multilayer form throughout the heterogeneous surface of the composite. The using of MCM-48 as support for Ni₂O₃ photocatalyst enhanced the adsorption capacity through increasing the total surface area. The loading process resulted in fixing of the Ni₂O₃ particles throughout the porous structure which producing more exposed active photocatalyst sites and active adsorption sites for the incident photons as well as preventing the nickel oxide particles from agglomeration. Based on the obtained results, supporting of Ni₂O₃ particles onto MCM-48 is promising active centers for the degradation of Congo red dye molecules.     

Shades of green: A psychographic segmentation of the green consumer in Kuwait using self-organizing maps

This study uses self-organizing maps (SOM) to examine the effect of various psychographic and cognitive factors on green consumption in Kuwait. SOM is a machine learning method that can be used to explore patterns in large and complex datasets for linear and non-linear patterns. The results show that major variables affecting green consumption are related to altruistic values, environmental concern, environmental knowledge, skepticism towards environmental claims, attitudes toward green consumption, and intention to buy green products. The study also shows that SOM models are capable of improving clustering quality while extracting valuable information from multidimensional data.     

The Effect of Nitrogen Injection on Production Improvement in an Iranian Rich Gas Condensate Reservoir

In gas condensate reservoirs, after a decrease in pressure below the dew point pressure, condensate formation would occur. One of the common and practical methods for prohibiting the rapid pressure drop in the reservoir and reduction of liquid dropout is gas injection. In this study, experimental measurement, the full field reservoir model and an economical evaluation have been performed to investigate the effect of nitrogen injection on an Iranian Southwestern gas condensate reservoir. At first, swelling and CVD tests were carried out to determine the swelling factor and changing the saturation pressure by nitrogen. Then, the full field simulation (history matching and prediction) was performed and finally an economical evaluation has been made. The results show that injecting more volumes of nitrogen cause to decrease the liquid dropout, increase the dew point pressure, and condensate ultimate recovery, but this process is not an economical project.     

Preparation and properties of probiotic concentrated yoghurt (labneh) fortified with conjugated linoleic acid

Milk of high conjugated linoleic acid (CLA) level (1.25 g per 100 g milk fat) was produced by inclusion of fish oil and rousted soy bean in the ration of Holstein cows as compared to 0.55 g per 100 g milk fat in the milk of animals receiving control diet. Milk of normal (control) and high CLA content (treatment) was spray‐dried. Labneh was made from 20 g L^?1 reconstituted milk using 3 mL per 100 mL yoghurt starter and 2 mL per 100 mL of probiotic cultures of Lactobacillus casei or Lactobacillus acidophilus. The control (C) and high CLA (T) labneh were analysed chemically and microbiologically, and their viscosities were determined during cold storage for 15 days. The fat content of labneh of high CLA was less than that of the control, but the total solids (TS) were unaffected by the CLA level. Labneh made with Lb. acidophilus had lower TS and higher acidity, exopolysaccharides and acetaldehyde contents and viscosity than that made with the use of Lb. casei. Labneh from the different treatments retained high counts of the added probiotic (>10⁸ cfu g^?1) throughout the storage period. The storage period had significant effects on all parameters determined.