New CAMAC based data acquisition and beam control system for Lund nuclear microprobe

A new CAMAC based data acquisition system has been installed at the Lund Nuclear Microprobe facility. This paper reports on the development and present status of the data acquisition system. The system is a true multiparameter CAMAC based system with fast Fera bus readout and in crate memory buffer. The user interface is based on Sparrow Kmax software for a Power Macintosh platform. The system read out and tag the event data with position on-line, which make fast on-line monitoring of spectra or element maps possible.Simultaneously, all data can be saved event by event for off-line analysis. The beam scanning part is software controlled through a timed D/A converter, this allows fast scanning of the beam. With a CCD-camera and video card the area to be analysed could be defined directly from the image, and the sample position can be moved. Any kind of irregular scan patterns could be defined.     

圆管状声波换能器瞬态过程的分析

结合石油测井的实际情况,首次从理论上对常规声波测井仪中采用的圆管状压电陶瓷声波换能器在阶跃电压、冲激电压和正弦间断电压等激励信号的作用下的瞬态过程进行了分析,推导出了在上述几种情况下圆管状压电陶瓷换能器的声源函数和谱函数,并叙述了推导结果在声皮测井中的应用。     

Preparation of core–shell type nanoparticles of diblock copolymers of poly(L‐lactide)/poly(ethylene glycol) and their characterization in vitro

Core–shell type nanoparticles of poly(L ‐lactide)/poly(ethylene glycol) (LE) diblock copolymer were prepared by a dialysis technique. Their size was confirmed as 40–70 nm using photon correlation spectroscopy. The ¹H‐NMR analysis confirmed the formation of core–shell type nanoparticles and drug loading. The particle size, drug loading, and drug release rate of the LE nanoparticles were slightly changed by the initial solvents that were used. The drug release behavior of LE core–shell type nanoparticles showed an initial burst during the first 12 h and then a sustained release until 100 h. The degradation behavior of LE block copolymer nanoparticles was divided into three phases: the initial rapid degradation phase, the stationary phase, and the rapid degradation phase until complete degradation. It was suggested that lidocaine release kinetics were predominantly governed by the diffusion mechanism in the initial burst phase and after that by both of the diffusion and degradation mechanisms. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2625–2634, 2002     

Surface wave modes of printed circuits on ferrite substrates

Surface waves due to a current source on a grounded ferrite slab are investigated. Electromagnetic fields of the structure are in terms of a continuous plane wave spectrum. The spectrum of each field component is obtained numerically through the exponential-matrix method. The surface waves of the structure are extracted from the continuous spectrum by using the residue theorem and the method of steepest descent. Two types of surface waves are found and their properties are described. The surface wave modes found include dynamic surface wave modes which are closely related to the surface waves of a grounded dielectric slab, and magnetostatic surface wave modes which are related to the solution of Laplace's equation for the magnetic potential     

浅析体系转换法和粘贴碳纤维加固法在桥梁加固中的应用

通过对桥梁加固技术的研究，讨论了体系转换法和粘贴碳纤维布加固法的具体应用。     

红外图像序列小目标检测预处理技术

文中就如何复杂背景条件下低信噪比的小目标检测概率问题展开了讨论，提出了用空间高通滤的方法改善图像质量，达以抑制背景噪声，增强小目标的目的，并交坑通滤波和中值滤波做了一个简单的比较，随后采用分层投票表决法对目标进行检测，取得了良好效果。     

Reply to comments on “Error rate performance of theprojection code”

The authors reply to the comments by Koppelaar and Tolhuizen (see ibid. vol.46, no.9, p.573, 1998). They state that the optimum choice of the slopes used to perform the encoding process in a projection code always results in maximizing the minimum Hamming distance so that d=2 ^r     

Two-level optimal output feedback stabilizer design

The paper addresses the design of two-level power system stabilizers using an optimal reduced order model whose state variables are torque angles and speeds. The reduced order model retains their physical meaning and is used to design a two-level linear feedback controller that takes into account the realities and constraints of electrical power systems. The two-level control strategy is used, and a global control signal is generated from the output variables to minimize the effect of interactions. The effectiveness of this controller is evaluated and a multimachine system is given as an example to illustrate the advantages of the proposed method. Responses of the system with a two-level scheme and an optimal reduced order scheme are included for comparative analysis.     

FEATURE SOLID MODELING TOOL SYSTEM:FSMTS

In conformity with the principle of Design for Manufacture,feature-based design strate-(?)es have been developed.As the“feature”is relevant to the“macro process plan”and“macro NCprograms”,obviously,“feature”is beyond the power of conventional solid modellers.Neverthe-less,substantial breakthrough has not been made in the solid modeling field,except“feature at-taching”or“feature recognizing”methods have been taken on.In this paper,the theory,concepts,system architecture,and algorithm principles of solid modeling tool system have beenrepresented.The practice of Feature Solid Modeling Tool System (FSMTS) developed atHuazhong University has proved that the tool may be a new foundation of Feature-Based Design.