Method validation for strobilurin fungicides in cereals and fruit

Strobilurins are a new class of fungicides that are active against a broad spectrum of fungi. In the present work a GC method for analysis of strobilurin fungicides was validated. The method was based on extraction with ethyl acetate/cyclohexane, clean-up by gel permeation chromatography (GPC) and determination of the content by gas chromatography (GC) with electron capture (EC-), nitrogen/phosphorous (NP-), and mass spectrometric (MS-) detection. Three strobilurins, azoxystrobin, kresoxim-methyl and trifloxystrobin were validated on three matrices, wheat, apple and grapes. The validation was based on recovery tests at three or four spiking levels, determined as double determinations and repeated three times (n = 6). The mean recoveries for the three detectors were in the range of 70-114%, and the LODs were between 0.004mg/kg and 0.014mg/kg, for all three strobilurins. The values for repeatability and reproducibility were within the limits for repeatability and reproducibility given by the Horwitz equation. Validation was not accepted for azoxystrobin in grapes on all three detectors and for azoxystrobin in apple for the MS-detector. A comparison of matrix-matched standards versus standards in solvent showed varying differences     

Comparison of exhaust emissions from Swedish environmental classified diesel fuel (MK1) and European Program on Emissions, Fuels and Engine Technologies (EPEFE) reference fuel: a chemical and biological characterization, with viewpoints on cancer risk

Diesel fuels, classified as environmentally friendly, have been available on the Swedish market since 1991. The Swedish diesel fuel classification is based upon the specification of selected fuel composition and physical properties to reduce potential environmental and health effects from direct human exposure to exhaust. The objective of the present investigation was to compare the most stringent, environmentally classified Swedish diesel fuel (MK1) to the reference diesel fuel used in the "European Program on Emissions, Fuels and Engine Technologies" (EPEFE) program. The study compares measurements of regulated emissions, unregulated emissions, and biological tests from a Volvo truck using these fuels. The regulated emissions from these two fuels (MK1 vs EPEFE) were CO (-2.2%), HC (12%), NOx (-11%), and particulates (-11%). The emissions of aldehydes, alkenes, and carbon dioxide were basically equivalent. The emissions of particle-associated polycyclic aromatic hydrocarbons (PAHs) and 1-nitropyrene were 88% and 98% lower than those of the EPEFE fuel, respectively. The emissions of semi-volatile PAHs and 1-nitropyrene were 77% and 80% lower than those from the EPEFE fuel, respectively. The reduction in mutagenicity of the particle extract varied from -75 to -90%, depending on the tester strain. The reduction of mutagenicity of the semi-volatile extract varied between -40 and -60%. Furthermore, the dioxin receptor binding activity was a factor of 8 times lower in the particle extracts and a factor of 4 times lower in the semi-volatile extract than that of the EPEFE fuel. In conclusion, the MK1 fuel was found to be more environmentally friendly than the EPEFE fuel.     

Evaluation of <Emphasis Type="Italic">flaA</Emphasis> Short Variable Region Sequencing,Multilocus Sequence Typing,and Fourier Transform Infrared Spectroscopy for Discrimination between <Emphasis Type="Italic">Campylobacter jejuni</Emphasis> Strains

Discriminatory and robust typing methods are needed to improve the understanding of the dynamics of food-borne Campylobacter infections and epidemiology in primary animal production. To evaluate the strain discriminatory potential of typing methods, flaA short variable region (SVR) sequencing and Fourier transform infrared (FTIR) spectroscopy were applied on a collection of 102 epidemiologically related and unrelated Campylobacter jejuni strains. Previous application of FTIR spectroscopy for subtyping of Campylobacter has been limited. A subset of isolates, initially discriminated by flaA SVR sequencing, were further subjected to multilocus sequence typing (MLST). It was found that flaA SVR sequencing had a slightly higher discriminatory power than FTIR spectroscopy, based on the Simpson diversity index. The clustering of strains indicated that FTIR spectroscopy is indeed a suitable method for discrimination of Campylobacter. The isolates were assigned to six clusters based on flaA SVR sequences and nine clusters based on the FTIR spectroscopy profiles. Furthermore, the cluster analysis of flaA SVR sequences, MLST, and FTIR spectroscopy profiles showed a high degree of congruence, assigning the isolates to similar cluster structures. In conclusion, FTIR spectroscopy can be applied for subtyping of Campylobacter, and the high discriminatory potential of both flaA SVR sequencing and FTIR spectroscopy render them suitable screening methods for large numbers of strains.     

Electro-thermal and -mechanical model of thermal breakdown in multilayered dielectric elastomers

Multiple breakdown phenomena may take place when operating dielectric elastomers. Thermal breakdown, which occurs due to Joule heating, becomes of special importance when using multilayered stacks of dielectric elastomers, due to the large volume-to-surface-area-ratio. In this article, a 2D axisymmetric finite-element model of a multilayered stack of dielectric elastomers is set up in COMSOL Multiphysics®. Both the electro-thermal and electro-mechanical couplings are considered, allowing for determination of the onset of thermal breakdown. Simulation results show that an entrapped particle in the dielectric elastomer drastically reduces the possible number of layers in the stack. Furthermore, the possible number of layers is greatly affected by the ambient temperature and the applied voltage. The performance of three hyperelastic material models for modeling the elastomer deformation are compared, and it is established that the Gent model yields the most restrictive prediction of breakdown point, while the Ogden model yields the least restrictive estimation.     

Humidity sensitivity of optical structures prepared by r.f.-biased r.f. sputtering

In an attempt to produce optical structures with a lower humidity sensitivity than that of structures deposited by conventional evaporation, we used r.f.-biased r.f. sputtering for the preparation of coatings. The sensitivity was effectively reduced owing to the high density of bias-sputtered films which are subjected to controlled ion bombardment during their growth. Our experiments suggest that neither rate monitoring nor optical monitoring is necessary, at least not in the preparation of simple structures with few layers, if glow discharge sputtering processes comprising r.f. substrate biasing in diode, triode or magnetron set-ups are used to deposit the coatings.     

Long‐term effects of angiotensin II blockade with irbesartan on inflammatory markers in hemodialysis patients: A randomized double blind placebo controlled trial (SAFIR study)

Introduction: Low‐grade chronic inflammation is common in hemodialysis (HD) patients. Previous studies suggest an anti‐inflammatory effect of angiotensin II receptor blocker (ARB) treatment. The aim of this study was to compare the effect of ARB vs. placebo on plasma concentrations of inflammatory markers in HD patients. Methods: Adult HD patients were randomized for double‐blind treatment with the ARB irbesartan 150–300 mg/day or placebo. At baseline, 1 week, 3, 6, 9, and 12 months plasma high sensitivity C‐reactive protein (hsCRP), interleukin (IL)?1β, IL‐6, IL‐8, IL‐18, and transforming growth factor‐β (TGF‐β) were measured using Luminex and enzyme‐linked immunosorbent assay (ELISA) technology. Findings: Eighty‐two patients were randomized (placebo/ARB: 41/41). The groups did not differ in initial levels of any of the inflammatory markers (placebo/ARB median(range)): hsCRP 3.3(0.2–23.4)/2.7(0.2–29.6) μg/mL; IL‐1β 1.1(0.0–45.9)/1.1(0.0‐7.2) pg/mL; IL‐6 10(1–90)/12(1–84) pg/mL; IL‐8 31(9–134)/34(5–192) pg/mL; IL‐18 364(188–1343)/377(213–832) pg/mL; TGF‐β 3.2(0.8–13.9)/3.6(1.3–3.8) ng/mL. Overall, there was no significant difference in hsCRP, IL‐6, IL‐8, and TGF‐β between placebo and ARB‐treated patients during the study period, and hsCRP, IL‐6, IL‐8, and TGF‐β were relatively stable during the study period (P ≥ 0.18 in all tests for parallel curves, equal levels, and constant levels). The IL‐1β level was slightly different in the two groups over time, but not significantly (P = 0.09 in test for parallel curves) and it was also relatively stable during the study period (P ≥ 0.49 in tests for equal levels and constant level). IL‐18 was the only inflammatory marker which was not constant during the study period (P = 0.001 in test for constant level), but there was no significant difference between placebo and ARB‐treated (P ≥ 0.51 in tests for parallel curves and equal levels). Discussion: Inflammatory biomarkers were neither acutely, nor in the long‐term significantly affected by the ARB irbesartan. Our findings suggest that ARB treatment in HD patients does not offer protective anti‐inflammatory effects.     

PAHs in sediments of the Black River and the Ashtabula River, Ohio: source apportionment by factor analysis

Sources of polycyclic aromatic hydrocarbons (PAHs) in the Black River and Ashtabula River sediments were apportioned using a factor analysis (FA) model with nonnegative constraints. Source profiles, contributions (microg/g) and percent contributions are determined with no prior knowledge of sources. The FA model includes scaling and backscaling of data with average PAH concentrations, without sample normalization. The present work is a follow-up to studies that used a chemical mass balance model to apportion sources to the same data sets. Literature source profiles, modified based on gas/particle partitioning of individual PAHs, from nine PAH sources were considered for comparison. FA results for a three-source solution indicate traffic (58%), coke oven (26%), and wood burning/coal tar (16%) are the primary PAH sources to Black River sediments. The primary PAH sources to the Ashtabula River sediments are traffic (51%), coke oven (44%), and wood burning (5%). This work supports the previous studies of Black River and Ashtabula River PAHs by CMB model. In addition, FA provides a more realistic fit to Ashtabula River model data by eliminating 100% contributions from one source.     

Influence of Asellus aquaticus on Escherichia coli, Klebsiella pneumoniae, Campylobacter jejuni and naturally occurring heterotrophic bacteria in drinking water

Water lice, Asellus aquaticus (isopoda), frequently occur in drinking water distribution systems where they are a nuisance to consumers and water utilities. Whether they are solely an aesthetic problem or also affect the microbial water quality is a matter of interest. We studied the influence of A. aquaticus on microbial water quality in non-chlorinated drinking water in controlled laboratory experiments. Pure cultures of the indicator organisms Escherichia coli and Klebsiella pneumoniae and the pathogen Campylobacter jejuni as well as naturally occurring heterotrophic drinking water bacteria (measured as heterotrophic plate counts, HPC) were investigated in microcosms at 7 °C, containing non-sterilised drinking water, drinking water sediment and A. aquaticus collected from a non-chlorinated ground water based drinking water supply system. Concentrations of E. coli, K. pneumoniae and C. jejuni decreased over time, following a first order decay with half lives of 5.3, 18.4 and 1.3 days, respectively. A. aquaticus did not affect survival of indicators and pathogens substantially whereas HPC were influenced by presence of dead A. aquaticus. Growth rates increased with an average of 48% for bacteria grown on R-2A agar and an average of 83% for bacteria grown on yeast extract agar when dead A. aquaticus were present compared to no and living A. aquaticus present. A. aquaticus associated E. coli, K. pneumoniae and C. jejuni were measured (up to 25 per living and 500 per dead A. aquaticus) and so were A. aquaticus associated heterotrophic bacteria (>1.8*10⁴ CFU per living and >6*10⁴ CFU per dead A. aquaticus). A. aquaticus did not serve as an optimised habitat that increased survival of indicators and pathogens, since A. aquaticus associated E. coli, K. pneumoniae and C. jejuni were only measured as long as the bacteria were also present in the water and sediment.