Cost-benefit analysis of power system reliability: two utility casestudies

There is an emerging recognition that utility investments and other decisions that affect electric service reliability should be explicitly evaluated on the basis of their cost and benefit implications. A cost-benefit approach that quantifies the reliability benefits of alternatives in terms of the reduction in costs resulting from unserved energy enables the evaluation of generation and transmission capacity additions on a consistent, economic basis. This approach has been applied to two utility case studies. In a case study for Pacific Gas and Electric Company, it was used to evaluate three options for maintaining reliability in a major load center-two involving local generation, and the third, a new 230 kV transmission connection. In a case study for Duke Power Company, the approach was used to evaluate alternative designs for proposed additions to a transmission station. This paper describes the methodology and presents the two utility studies     

A high-current and high-temperature 6H-SiC thyristor

A 6H-SiC thyristor has been fabricated and characterized. A forward breakover voltage close to 100 V and a pulse switched current density of 5200 A/cm² have been demonstrated. The thyristor is shown to operate under pulse gate triggering for turn-on and turn-off, with a rise time of 43 ns and a fall time of less than 100 ns. The forward breakover voltage is found to decrease by only 4% when the operating temperature is increased from room temperature to 300°C. It is found that anode ohmic contact resistance dominates the device forward drop at high current densities     

Labelling 2-D geometric primitives using probabilistic relaxation:reducing the computational requirements

In previous work, an algorithm for matching geometric features was developed. Although the method worked well, it was demanding in computational resources when applied to large problems. The authors now present methods for reducing the computational requirements, without significantly affecting the reliability of the algorithm     

Moderate antioxidative efficiencies of flavonoids during peroxidation of methyl linoleate in homogeneous and micellar solutions

The relative reactivities as well as the stoichiometric coefficients for a number of flavonoids, catechols, and—for comparison—standard phenolic antioxidants were determined by analyzing the kinetics of oxygen consumption in organic and micellar systems, with peroxidation initiated by lipid- and water-soluble azo initiators. The results demonstrated that the flavonoids did not behave as classic phenolic antioxidants such as α-tocopherol, but showed only moderate chain-breaking activities. The results were in line with other structure-activity relationship studies on the importance of the B-ring catechol structure, the 2,3-double bond, and the 3,5-hydroxy groups. The data are discussed in view of possible explanations of the deviations flavonoids reveal in their behavior compared with regular phenolic antioxidants.     

Some soft measures for performance analysis: The “core” dimensions of expert system quality

The post-implementation evaluation of new technologies such as artificial intelligence, multimedia or parallel computing systems which are in operation is a much neglected problem. There is a lack of methods, techniques and tools for the practitioner to analyze the performance such systems. In earlier work, we have presented a framework and methodology that described a socio-technical approach for evaluating expert systems. In short, we determined the features and characteristics of expert systems that are most critical for their “implementation success”. This was the result of empirical evidence from a first-ever field study of expert systems in production. In this paper, specifically tailored to an audience of generalists, we retrospectively put our work into the framework of performance measurement and analysis. The end-result of our investigations is that we have definitional clarity as to how we may alternately evaluate such decision support systems.     

Pressure release of containments during severe accidents in Switzerland

As required by the Swiss Federal Nuclear Safety Inspectorate (HSK) all Switzerland's five nuclear power plants have to install a containment filtered venting system. The integrity of the containment (the last barrier for radioactive releases to the environment) can be threatened by overpressure due to inadequate heat removal. Design requirements have been provided for a specific class of severe accident scenarios. In general the capacity of the system is considered sufficient if it is able to vent the steam production corresponding to a decay heat level of 1% of the thermal reactor power. The mitigation capacity for the reduction of released radioactive material is specified by a retention factor of 1000 for aerosols to prevent or limit a long term ground contamination and a factor of 100 for elementary iodine for prevention or limiting of thyroid doses and to avoid short term evacuation. Besides existing requirements for design, maintenance and operation, additional claims such as passivity and operability at any pressure conditions inside the containment have to be met. Passivity implies that the system can be initiated after a severe accident without any operator action. The system also has to allow early manual venting. Various filtered venting systems are presently available. The nuclear power plants of Beznau, Gosgen, Leibstadt and Muhleberg have already selected such systems and already implemented them or are going to install them step by step. Beznau selected the Sulzer-EWI system which is using a water pool with nozzles-baffle plates and mixing elements to achieve the required filtration of the aerosols. In both Beznau units, the systems are installed and in standby mode. Gosgen, a pressurized water reactor as well as Beznau, is going to implement a filter system developed by Siemens-KWU, known as sliding pressure venting process, combining a venturi scrubber in a water pool and a mesh filter. The boiling water reactor of Leibstadt also selected the same system as Beznau while Müheberg choose the ABB system but not in the common design. The venturi pipes are thereby integrated in the water pool of the outer torus. The system in all five nuclear power plants is fully operable and in standby mode since December 1993.     

Comparison of physical property-porosity behaviour with minimum solid area models

An extensive survey of the porosity dependence of (room temperature) physical properties shows that mechanical properties and electrical and thermal conductivity, i.e. properties dependent on the local flux or fields in the material, follow minimum solid area models. This is shown extensively for elastic properties and tensile (flexure) strength, but consistency with other properties, e.g. compressive strength, hardness, electrical and thermal conductivity is also shown. Although data for ceramics is most extensive, data for rocks, metals, and carbon are included, since the consistency of these, especially of metals with ceramics, provides important support for the minimum solid area concept. While porosity characterization is generally minimal, expected model trends with pore character are corroborated by correlating processing and resultant expected pore character with porosity-property results. It is argued that properties dependent on mass should be better fit by a linear, i.e. rule of mixture, relationship between such properties and porosity. Support for this is shown in dielectric constant-porosity data.