宝钢Nol初轧机工作辊的热处理

通过喷雾淬火的工艺方法对Φ1350mm×7255mm,重42t的初轧机工作辊进行调质试验,各项检验结果完全满足了技术条件要求,达到了试验目的。     

磁场凝固处理对稀土贮氢合金结构和电化学性能的影响

研究了贮氢合金凝固过程中施加直流磁场处理对其组织结构和电化学性能的影响。结果表明：磁场处理没有改变AB5型贮氢合金的CaCu5型六方体结构，但使晶胞常数α0、c0增加，晶胞体积增大；合金的电化学容量变化不大，却明显改善了其高倍率放电（C）性能和循环寿命，合金在5C的放电容量提高了27．8％，S200由0．68上升到0．81；合金中氢的扩散系数增大。     

CALCULATION OF TRANSFORMATION VOLUME FRACTION TO HQ590 HOT ROLLED STRIP STEEL DURING CONTINUOUS COOLING

On the basis of phase transformation kinetics, the transformation of γ→α,P,B have been investigated through considering the effect of deformation. The calculation methods of volume fraction have also been given. Comparing with common method, the simulated results are in more agreement with experiment results.     

STUDY ON THE SHOCK WAVE CRYSTALLIZATION OF AMORPHOUS ALLOYS BY DSC

Shock wave and annealing crystallization of amorphous alloys FeSiB, FeMoSiB and FeCuNbSiB were studied by isothermal and non-isothermal DSC technique. It was found that the shock wave crystallization is very perfect, the fraction crystallized is very close to 100%, though the period of crystallization is very short, only about 10-4-10-6s. Their produced phases differ from the parent phase in structure and composition. The high velocity of the transformation is very difficult to explain by the diffusion theory of solid state phase transition.     

A STUDY OF B-P UNIFIED VISCOPLASTIC CONSTITUTIVE MODEL

By combining the Bodner-Partom constitutive model and equivalent stress function, finite element methods and program on analyzing non-elastic deformation and stress for thermal viscoplastic material are studied in this paper, and it's the first time that this material model is used in a kind of engineering software-MARC. Thermal viscoplastic behavior of high temperature alloy GH536 specimen with gap is analyzed by this program. The research results show it is feasible to analyze thermal viscoplastic behavior of specimen or structure by applying B-P model.     

Fe－Nb－C合金的高温内耗

测量了高纯Ｆｅ－Ｎｂ－Ｃ合金的４００－８５０℃内耗，发现一个峰温度随测量应变振幅变化的高温（６６６－７４０℃）磁机械滞后阻尼内耗峰。研究了峰的特征、出现、消失条件及升降温、频率、振幅、变形与退火等因素对峰的影响．提出了用内耗实验确定材料中阻碍铁磁畴壁Ｂａｒｋｈａｕｓｅｎ跳动应力的方法和合金中产生磁机械滞后阻尼－温度峰（Ｑ_ｍ~（－１）－Ｔ）的物理机制。     

添加Ce与P+Sr复合变质对高硅耐热铝合金组织与性能的影响

研究了添加Ce与P＋Sr复合变质对Al-21Si-1.5Cu-0.5Mg-2.5Fe合金显微组织与性能的影响.结果表明：添加1.5?使粗大针状铁相消失,形成富Ce富Fe的鱼骨状相;P＋Sr复合变质可使初晶硅平均尺寸由70mm细化到20mm,共晶硅平均截线长降到2.1 mm,合金室温抗拉强度比未变质前提高21.5%,与P＋Sr＋Ce复合变质的Al-21Si-1.5 Cu-1.5Ni-2.5Fe-0.5Mg合金相当.     

生产非调质N80级石油套管的新工艺可行性实验研究

对国内生产非调质N80级石油套管的现状做了简述,在包钢φ180 mm机组上取轧卡样,用Gleeble-1500热模拟试验机测定34Mn2VN钢的动态CCT曲线并进行控冷实验.借助光镜和扫描电镜对显微组织和断口进行分析.通过实验研究,提出了一种新的生产非调质N80级石油套管的工艺,在包钢进行大批量生产试验.结果表明,选用合理的终轧温度和冷速,采用加热→穿孔→连轧→脱管→定减径→冷却,可实现大批量生产.该工艺与传统生产工艺相比有减少工序、提高生产率、节约能源的优点.     

压铸模与铝合金金属间化合物的形成与分解

为了研究压铸模与铝合金金属间化合物的形成与分解过程,进行了热浸铝试验.试验结果表明金属间化合物的形成与分解是一个连续不断的循环过程,两者之间的相互关系导致了钢基的失重以及体积的减少.     

金属粉末注射成形技术的最新研究动态与发展趋势

简要阐述了粉末注射成形技术的特点与应用 ,并从粉末的制备、粘结剂体系的设计、注射成形过程及其计算机模拟等几个方面阐明了粉末注射成形技术的最新研究动态 ,最后提出了粉末注射成形技术的重要发展趋势