Crystalline morphology and isothermal crystallization kinetics of poly(ethylene terephthalate)/clay nanocomposites

A poly(ethylene terephthalate) (PET)/montmorillonite clay nanocomposite was synthesized via in situ polymerization. Microscopic studies revealed that in an isothermal crystallization process, some crystallites in the nanocomposite initially were rod‐shaped and later exhibited three‐dimensional growth. The crystallites in the nanocomposite were irregularly shaped, rather than spherulitic, being interlocked together without clear boundaries, and they were much smaller than those of neat PET. With Avrami analysis, the isothermal crystallization kinetic parameters (the Avrami exponent and constant) were obtained. The rate constants for the nanocomposite demonstrated that clay could greatly increase the crystallization rate of PET. The results for the Avrami exponent were consistent with the observation of the rodlike crystallites in the PET/clay nanocomposite during the initial stage. Wide‐angle X‐ray scattering and Fourier transform infrared studies showed that, in comparison with neat PET, the crystal lattice parameters and crystallinity of the nanocomposite did not change significantly, whereas more defects may have been present in the crystalline regions of the nanocomposite because of the presence of the clay. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1381–1388, 2004     

磁盘阵列环境下的取证目标系统重构

封存原始硬盘与业务系统服务的连续性是计算机取证中面临的一对矛盾。在独立硬盘环境中,问题的解决并不困难,但在磁盘阵列(RAID)环境下,目前还缺乏有效的解决办法。为此,为RAID环境下的取证目标系统的重构提出一套解决方案,并设计实现其中关键任务的处理软件。实验表明,该方法可适用于不同RAID等级、不同操作系统下的系统重构,使得用户感受不到重构得到的系统与原系统有任何差异。与数据同步方法相比,该方法可以有效地减少重构的时间开销,且不会破坏原始证据硬盘上的数据。     

Interactions between Cytochrome c and DNA Strands Self-Assembled at Gold Electrode

In this work, we reported the investigation on the interaction between DNA strands self-assembled at gold electrodes and an electron transfer protein, cytochrome c. We observed that cytochrome c exhibited well-defined electrochemistry in both double-stranded and single-stranded DNA films. This suggested that the electron transfer reaction of cytochrome c arose possibly due to the electron hopping along DNA strands rather than wiring along the double helix. We also compared the heterogeneous electron transfer rate of cytochrome c with that of a ruthenium complex, which further confirmed this mechanism.     

Preparation of NaBiO3 and the electrochemical characteristic of manganese dioxide doped with NaBiO3

NaBiO₃ crystal of high purity has been synthesized through chemical oxidization. The morphology and thermal stability of NaBiO₃ were examined with scanning electron microscope (SEM) and thermogravimetry-differential scanning calorimetry (TG-DSC). The electrochemical properties of MnO₂ electrodes with and without doping NaBiO₃ were studied through galvanostatic charge/discharge and cyclic voltammetry. The results indicate that the MnO₂ electrode doped with NaBiO₃ possesses remarkably higher discharge voltage and capacity and better reversibility than the pure MnO₂ electrode and Bi₂O₃ doping MnO₂ electrode.     

Ethanol vapor deactivation of gossypol in cottonseed meal

Most cottonseed cultivars contain gossypol, a polyphenolic antinutritional compound. “Free” gossypol is a physiologically active form of gossypol, which is toxic to young- and nonruminant animals. To utilize solvent-extracted cottonseed meal as a general feed, gossypol must be either removed or deactivated to a minimum level specified for each class of animal. Normally, deactivation is carried out prior to oil extraction; however, the desired level of deactivation is not always attained. A new supplemental method of deactivation has been found by using either ethanol or isopropanol vapors on solventextracted meal. In a bench-top set-up, ethanol vapor reduced free gossypol from 0.115 to 0.053%, and a further reduction to 0.026% has been observed with the addition of ferrous sulfate. The supplemental deactivation method can, in most cases, reduce free gossypol to significantly safer levels for feeding, thus increasing utility, and possibly demand, for cottonseed meal as a general animal feed protein source. Presented in part at the AOCS Annual Meeting, Atlanta, GA, May 8–12, 1994.     

Consolidation of Nano-Sized TiN Powders by Spark Plasma Sintering

Nano-sized TiN powders with an average particle size of 19 nm were synthesized via a new method, reduction–nitridation reaction in liquid ammonia. A consolidation procedure using spark plasma sintering (SPS) was used, and a dense TiN ceramic (>98% of theoretical) with mean grain size of 100–150 nm was obtained at 1380°C. The influence of sintering temperature on grain growth and microstructural evolution was also discussed.     

吸湿介质对碳纤维增强铸型尼龙复合材料的吸湿行为及力学性能的影响

本文对碳纤维增强铸型尼龙(CF／MC 尼龙)复合材料在不同吸湿介质中的吸湿行为进行了研究。结果表明，对于纤维体积分数为10％的碳纤维增强铸型尼龙复合材料(10％CF／MC尼龙复合材料)，随着吸湿介质的PH值减小，它的吸湿率增大。同时，经过吸湿后，10％CF／MC尼龙复合材料的弯曲强度有明显的下降。随着吸湿介质的PH值减小，试样的弯曲强度下降。使用环境扫描电子显微镜观察在10％HCl溶液中吸湿的试样的剪切断口形貌，得到的结果与吸湿实验的结果一致。     

一体化锅炉水处理剂的制备及性能研究

利用自制SW-56共聚物，复配有机磷酸盐和焦亚硫酸钠除氧剂及消泡剂，成功制备XF-4一体化锅炉水处理剂。对XF-4锅炉水处理剂的阻垢、缓蚀进行了试验研究，表明其具有优良的阻垢能力，可以明显抑制热水锅炉积垢现象；加入改性除氧剂能降低锅炉水中溶解氧的含量，使腐蚀控制较理想；配方中的消泡剂组分可防止锅炉水表面起泡，抑制高悬浮物下的携带作用。     

Photochemical degradation of glassy polyesters of low softening point

The photodegradation of polyesters prepared by the reaction of o-phthalic, adipic, and “dimer” acids with ethylene glycol has been studied. The polyesters softened at temperatures in the range of 25–50°C. Polymer films were irradiated in air by means of a medium pressure mercury lamp and the extent of formation of COOH groups determined by infrared spectroscopy. The films were also irradiated in vacuo and in air by means of a high-pressure mercury lamp, and the volatile products, consisting mainly of carbon monoxide and carbon dioxide, were determined by gas chromatography. The results are interpreted in terms of simultaneous Norrish type I and type II decompositions of the polyesters. The type I process accounts for the formation of carbon monoxide and carbon dioxide in the absence of air. The enhanced yield of carbon dioxide in irradiations performed in air is ascribed to the formation of hydroperoxide which undergoes further photolysis. The type II process accounts for the formation of COOH groups. The photodegradation of these glassy polyesters parallels that of crystalline poly(ethylene terephthalate) and is relatively unaffected by changes in composition of the aromatic polyester.     

Graft Copolymerization of Acrylamide onto Oil Palm Empty Fruit Bunch (OPEFB) Fiber

Grafting of acrylamide (AAm) onto oil palm empty fruits bunch fiber using hydrogen peroxide as initiator and methyl acrylate as comonomer was investigated. The amount of comonomer needed to make grafting of acrylamide possible was determined. The percentage of poly(acrylamide) and the comonomer in the final graft copolymer was estimated by elemental analysis. Results obtained indicated that methyl acrylate facilitated the incorporation of acrylamide monomer onto OPEFB. The reactivity ratios for both monomers were determined by using Fineman–Ross plot. The effects of reaction temperature and period as well as amount of the initiator, solvent, monomer and comonomer on the percentage of grafting at fixed amount of comonomer (11 mmol) were studied. Maximum percentage of grafting was achieved when the amount of initiator and solvent 3.98×10⁻³ mol and 50 mL respectively. The optimum reaction temperature was 50 ^○C and the reaction period was 90 min. Highest percentage of grafting was 232% when 25.6 mmol of acrylamide was used under these optimum conditions. The presence of functional group in the grafted polymer is characterized by infrared spectroscopy and the surface morphology is observed by scanning electron microscopy. Thermoanalytic investigation on OPEFB and OPEFB-g-PAAM were carried out to evaluate the thermal stability and respective activation energy of the materials.