The morphology and gas‐separation performance of membranes comprising multiwalled carbon nanotubes/polysulfone–Kapton

The development of desirable chemical structures and properties in nanocomposite membranes involve steps that need to be carefully designed and controlled. This study investigates the effect of adding multiwalled nanotubes (MWNT) on a Kapton–polysulfone composite membrane on the separation of various gas pairs. Data from Fourier transform infrared spectroscopy and scanning electron microscopy confirm that some studies on the Kapton–polysulfone blends are miscible on the molecular level. In fact, the results indicate that the chemical structure of the blend components, the Kapton–polysulfone blend compositions, and the carbon nanotubes play important roles in the transport properties of the resulting membranes. The results of gas permeability tests for the synthesized membranes specify that using a higher percentage of polysulfone (PSF) in blends resulted in membranes with higher ideal selectivity and permeability. Although the addition of nanotubes can increase the permeability of gases, it decreases gas pair selectivity. Furthermore, these outcomes suggest that Kapton–PSF membranes with higher PSF are special candidates for CO₂/CH₄ separation compared to CO₂/N₂ and O₂/N₂ separation. High CH₄, CO₂, N₂, and O₂ permeabilities of 0.35, 6.2, 0.34, and 1.15 bar, respectively, are obtained for the developed Kapton–PSF membranes (25/75%) with the highest percentage of carbon nanotubes (8%), whose values are the highest among all the resultant membranes. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43839.     

Identification of cell‐nucleation mechanism in foam injection molding with gas‐counter pressure via mold visualization

The mechanisms of cell nucleation and growth are investigated in foam injection molding (FIM) using gas‐counter pressure (GCP). An in‐situ mold visualization technique is employed. The application of GCP suppresses cell nucleation, and prevents the blowing agent from escaping during mold‐filling. The inherent structural heterogeneity in the regular FIM can be improved because of the uniform cavity pressure when employing GCP. The cavity pressure profiles show much faster pressure‐drop rates using GCP, because the single‐phase polymer/gas mixture has a lower compressibility than the two‐phase polymer/bubble mixture. Therefore, both the cell nucleation and growth rates are significantly increased through a higher pressure‐drop rate on the removal of the GCP. The effect of GCP magnitude on the cell morphology is explored. When the GCP is lower than the solubility pressure, bimodal foaming occurs. As the GCP increases above the solubility pressure, the cell density increases because of the higher pressure‐drop rate. © 2016 American Institute of Chemical Engineers AIChE J, 62: 4035–4046, 2016     

Electro-osmosis treatment techniques and their effect on dewatering of soils,sediments, and sludge: A review

Electro-osmosis is an established method of dewatering fine soils, sediments, and sludge (SSS). The efficiency of electro-osmotic treatment is controlled by the electrical resistance of the system. Due to an increase in SSS resistance during treatment, its cost efficiency is reduced, limiting the widespread use of this technique. The aim of this paper is to discuss the main reasons for the increase in SSS resistance during treatment and then to analyze the most recent and widely spread modifications to classical electro-osmotic treatment that attempt to combat these issues and improve the efficiency of the technique. These modifications to electro-osmotic treatment are polarity reversal, an intermittent current, the injection of chemical solutions at the electrodes, and the use of geo-synthetics. The paper discusses the relevant research on the above adaptations, and the advantages and disadvantages of each are evaluated and compared using the available laboratory and field tests in the literature on electro-osmotic dewatering research. All four methods of modification are shown to provide significant improvements and can be successfully translated to the field for greater use. However, the improvements they bring about may not be sufficient to warrant their general use in geotechnical applications.     

Novel conductive magnetic nanocomposite based on poly (indole-co-thiophene) as a hemoglobin diagnostic biosensor: Synthesis,characterization and physical properties

The novel conductive nanocomposite has been successfully prepared by emulsion polymerization. First, magnetite nanoparticles were synthesized via coprecipitation reaction. Then, poly (indole-co-thiophene)@Fe₃O₄ nanocomposite was prepared via emulsion copolymerization of indole and thiophene monomers using sodium dodecyl sulfate as an emulsifier and ammonium persulfate as an oxidant in the presence of Fe₃O₄ nanoparticles. Characterization of the synthesized copolymer, Poly (In-co-T), and its magnetic nanocomposite were studied by Fourier transform infrared spectra, X-ray diffraction, scanning electron microscopy, thermal gravimetric analysis, differential scanning calorimetric, UV-vis spectrophotometer, and vibrating sample magnetometer. Also, the electrical conductivity of copolymer and nanocomposite were determined by four-probe instrument. Results showed a synergic effect in thermal stability by good interaction between polymer chain and magnetic nanoparticles. The conductivity of the nanocomposite was higher than bare copolymer, and increase of nanoparticles content caused an increment in the conductivity of the nanocomposites. The applicable properties of proposed conductive nanocomposite as a base at electrochemical biosensing have been investigated.     

不同螺栓布置下螺栓连接的滞回性能

从1994年北岭地震中可看到,栓焊节点的抗震性能较差。因此,常用于工业建筑和高层建筑中的抗弯框架多采用端板连接和T型螺栓连接。采用有限元方法,通过改变螺栓的纵横布置对比了14个试件的滞回性能。结果表明:假定两者总的耗能能力相同,则T型螺栓连接的抗弯能力和初始转动刚度均比基于AISC规范设计的端板螺栓连接高。在往复荷载作用下,螺栓布置的改变对T型螺栓连接破坏模式的影响要大于端板连接,端板连接更适用于具有初始几何缺陷的结构。     

Integrating IPsec within OpenFlow Architecture for Secure Group Communication

Network securityprotocolssuch as IPsechave been used for many years to ensure robust end-to-end communication and are impor-tant in the context of SDN.Despite the widespread installation of IPsec to date,per-packet protection offered by the protocol isnot very compatible with OpenFlow and flow-like behavior.OpenFlow architecture cannot aggregate IPsec-ESP flows in transportmode or tunnel mode because layer-3 information is encrypted and therefore unreadable.In this paper,we propose using the Secu-rity Parameter Index(SPI)of IPsec within the OpenFlow architecture to identify and direct IPsec flows.Thisenables IPsec to con-form to the packet-based behavior of OpenFlow architecture.In addition,by distinguishing between IPsec flows,the architectureis particularly suited to secure group communication.     

Gold nanocages in cancer diagnosis,therapy, and theranostics: A brief review

Regarding the increasing number of cancer patients, the global burden of this disease is continuing to grow. Despite a considerable improvement in the diagnosis and treatment of various types of cancer, new diagnosis and treatment strategies are required. Nanotechnology, as an interesting and advanced field in medicine, is aimed to further advance both cancer diagnosis and treatment. Gold nanocages (AuNCs), with hollow interiors and porous walls, have received a great deal of interest in various biomedical applications such as diagnosis, imaging, drug delivery, and hyperthermia therapy due to their special physicochemical characteristics including the porous structure and surface functionalization as well as optical and photothermal properties. This review is focused on recent developments in therapeutic and diagnostic and applications of AuNCs with an emphasis on their theranostic applications in cancer diseases.     

Structural and electronic properties of CuInSe2

Structural investigation on monocrystalline CuInSe₂ samples has been made. From the single crystal results, the space group of CuInSe₂ was confirmed to be Iˉ42d and the crystal solidification direction was investigated. Compositional uniformity of the ingots was established by EPMA and it was found that the indium concentration was greater than that for copper. Systematic annealing experiments were carried out in vacuum at different temperatures (as low as 160° C) and for different times. Large variation in resistivity was observed after the annealing treatment. P-type samples were found to convert to n-type after the heat-treatments.