Effect of HBT on the stability of laccase during the decolourization of textile wastewaters

BACKGROUND: This study concerns the assessment of laccase stability during textile industry effluent treatment by laccase in the presence of a mediator RESULTS: The effects of 1‐hydroxybenzotriazole (HBT) and textile wastewater on the stability of a crude laccase prepared from cultures of Trametes trogii during the process of textile industry effluent decolourization were determined. HBT was essential for decolourization of effluent by laccase. Decolourization efficiency decreased when effluent was repeatedly added to the reaction mixture, suggesting inhibition of laccase during the process. Stability of the laccase was not affected by different concentrations of effluent, but inactivation was proportional to HBT concentration. CONCLUSION: Experimental results showed that a redox mediator such as HBT was required for high decolourization rate of textile industry effluent; however free radicals generated from this compound inactivated the laccase used in the process. Copyright © 2009 Society of Chemical Industry     

Photodegradation of phenol red in the presence of oxyhydroxide of Fe(III) (Goethite) under artificial and a natural light

The (α‐FeOOH) Goethite composite is a stable and an efficient catalyst in aqueous suspension under irradiation at 365 nm and by solar light. The photocatalytic activities of this composite were evaluated using Phenol Red (PR) dye (phenolsulfonphthalein class). In the dark, controlling factors, such as the pH and the adsorption of PR on Goethite surface were evaluated (before starting the photochemical experiments). It was found that the system PR‐Goethite present a small decrease in the main band of the dye (435 nm) which was explained by the low rate of adsorption of this dye on the Goethite. Also, we note that 40% of PR decolourisation was obtained after 200 min by the system PR‐Goethite‐hydrogen peroxide (H₂O₂) in dark due to the formation of ^?OH by thermal decomposition of H₂O₂ on the surface of Goethite. The effects of various experimental parameters, such as initial dye concentration, pH, photocatalyst amount, tert‐Butyl alcohol effect and H₂O₂ addition were investigated in the study of photodegradation of the dye. The results showed that the photodegradation of PR under UV‐A (365 nm) irradiation could be enhanced greatly in the presence of H₂O₂. Natural radiation tests (under sunlight) showed that degradation was faster comparing with that obtained using the artificial one at 365 nm. Studies of the mineralization using total organic carbon method under naturel light certify that this method, compatible with the environment, may be considered in the treatment of wastewater and generally in the process of removal of this kind of pollutant.     

Using Stochastic Differential Equation for Verification of Noise in Analog/RF Circuits

Today’s analog/RF design and verification face significant challenges due to circuit complexity, process variations and short market windows. In particular, the influence of technology parameters on circuits, and the issues related to noise modeling and verification still remain a priority for many applications. Noise could be due to unwanted interaction between the circuit elements or it could be inherited from the circuit elements. In addition, manufacturing disparity influence the characteristic behavior of the manufactured circuits. In this paper, we propose a methodology for modeling and verification of analog/RF designs in the presence of noise and process variations. Our approach is based on modeling the designs using stochastic differential equations (SDE) that will allow us to incorporate the statistical nature of noise. We also integrate the device variation due to 0.18μ m fabrication process in an SDE based simulation framework for monitoring properties of interest in order to quickly detect errors. Our approach is illustrated on nonlinear Tunnel-Diode and a Colpitts oscillator circuits.     

THERMAL DOSE OPTIMIZATION IN HYPERTHERMIA TREATMENTS BY USING THE CONJUGATE GRADIENT METHOD

In the treatment of cancerous tumors, the thermal dose is the time temperature history required to treat or destroy the undesirable tissue. The aim of this article is to calculate the optimum history of the heat source that, in the one-dimensional bioheat transfer model, results in the desired thermal dose. The time dependent strength of this source defines the accumulated energy at the end of a single heat treatment period. First the optimum control problem is formulated in infinite-dimensional form. The associated adjoint problem is obtained using the calculus of variations and an analytical formula is derived for the gradient of the functional of interest. Then a parametric representation of the control parameter is developed and the adjoint state approach is performed in conjugation with the conjugate gradient method for the solution of this control problem in finite-dimensional form. A one-dimensional numerical case is analyzed and discussed to demonstrate the performance and the robustness of the present method.     

Formally Analyzing Expected Time Complexity of Algorithms Using Theorem Proving

Probabilistic techniques are widely used in the analysis of algorithms to estimate the computational complexity of algorithms or a computational problem. Traditionally, such analyses are performed using paper-and-pencil proofs and the results are sometimes validated using simulation techniques. These techniques are informal and thus may result in an inaccurate analysis. In this paper, we propose a formal technique for analyzing the expected time complexity of algorithms using higher-order-logic theorem proving. The approach calls for mathematically modeling the algorithm along with its inputs, using indicator random variables, in higher-order logic. This model is then used to formally reason about the expected time complexity of the underlying algorithm in a theorem prover. The paper includes the higher-order-logic formalization of indicator random variables, which are fundamental to the proposed infrastructure. In order to illustrate the practical effectiveness and utilization of the proposed infrastructure, the paper also includes the analysis of algorithms for three well-known problems, i.e., the hat-check problem, the birthday paradox and the hiring problem.     

Dynamic behavior of a two-stage gear train used in a fixed-speed wind turbine

The dynamic behavior of a two stage spur gear system used in a typical wind turbine is investigated in this paper. With the purpose of having an accurate simulation, for a given excitations, of the dynamic response of bearings, shafts and teeth in contact.In this study, we developed a lamped mass dynamic model with 12 DOFs. This model is excited by external and internal issues sources. The main factors of these excitations are the variability in the wind resource and the time varying mesh stiffness fluctuation.The aerodynamic torque is calculated from an empirical approach of the power coefficient. The incoming flow is modeled by an analytic equation test varies with time. The differential equations governing the system motion are solved by an implicit Newmark algorithm.     

Development of a portable spectrofluorimeter for measuring the microbial spoilage of minced beef

The evaluation of meat spoilage is based on sensory and microbiological analyses. The disadvantages of sensory analyses are its reliance on highly trained panelists, a procedure which makes it costly and unattractive for routine analyses. Moreover, the classical microbiological analyses are lengthy, costly and destructive. In this study a portable fluorescence spectrometer was tested to quantify minced beef spoilage. This study was investigated on samples stored aerobically and under vacuum at 5 and 15 °C. Total viable counts (TVC), Pseudomonas, lactic acid bacteria, and yeast/molds counts were investigated with classical culture methods. Fluorescence spectra were recorded on the same samples using different excitation LEDs (280, 320, and 380 nm). PLS-R with leave-one-out cross validation was used to perform calibration and validation models. The PLS-R models presented good R2(CV) (0.50-0.99) and ratio of standard deviation (RPD(CV): 1.40-8.95) values after cross-validation. It could be concluded that portable spectrofluorimeters are promising devices to evaluate spoilage in minced beef.     

Structural changes of milk components during acid-induced coagulation kinetics as studied by synchronous fluorescence and mid-infrared spectroscopy

Dynamic oscillatory experiments and front-face synchronous fluorescence spectroscopy and mid-infrared (mid-IR) spectroscopy have been used to investigate structure evolution, at the macroscopic and molecular levels, during milk acidification kinetics. The studies were performed using skim milk, at two different temperatures (30 °C and 40 °C), to which was added glucono-δ-lactone (GDL) to generate different structural changes in casein micelles and gels. Synchronous fluorescence spectra were recorded in the 250-500 nm excitation wavelength range using an offset of 80 nm between the excitation and emission monochromators for each system during the 300 min acidification kinetics. The change in the fluorescence intensity at 281 nm reflects the pH-induced physicochemical changes of casein micelles and, in particular, structural changes in the micelles in the pH range 5.5-5.0. Regarding mid-infrared spectroscopy, the region located between 1700 and 1500 cm(-1), corresponding to the amide I and II bands, and the 1500-900 cm(-1) region, called the fingerprint region, were considered for the characterization of milk coagulation kinetics. Changes in the absorbance at 1063 cm(-1) as a function of pH for kinetics recorded at 30 °C and 40 °C reflected pH-induced phosphate dissolution in the pH range 5.5-5.0. Compared to rheometry, which reveals microstructure changes only in the gel state, spectroscopic methods make it possible to monitor molecular structure changes in micelles throughout the acidification processes.     

Evaluation of the effects of acetyl tributyl citrate as bio‐based plasticizer on the physical,thermal, and dynamical mechanical properties of poly(vinyl chloride)/polymethyl methacrylate blends

This article details our work in studying the plasticization of Poly(vinyl chloride) (PVC)/Polymethyl methacrylate (PMMA) blends with bio‐based acetyl tributyl citrate (ATBC) in place of conventional plasticizers such as di(2‐ethylhexyl) phthalate. PMMA was blended with PVC in various ratios from 0 to 100 wt% by melt compounding with or without the plasticizer ATBC. Both the glass transition temperatures of the blends (differential scanning calorimetry) and Tα (dynamic mechanical thermal analysis) are consistent with a miscibility of the components, and Fourier transforms infrared spectroscopy studies show that there are specific interactions in the PVC/PMMA blends favoring the miscibility. The thermal degradation of the blends was studied by thermogravimetric analysis that shows the thermal degradation of rigid and plasticized PVC/PMMA is a process composed of two‐steps and that PMMA exercises a stabilizing effect on the thermal degradation of PVC during the first step by decreasing the rate of dehydrochlorination. J. VINYL ADDIT. TECHNOL., 25:E73–E82, 2019. © 2018 Society of Plastics Engineers