自由空间二维榕树网实现方法

鉴于榕树网在自由空间光子交换网络中具有重要的应用价值,分析了榕树网的特点和4×4二维榕树网的空间拓扑结构,通过偏振光分光棱镜、微闪耀光栅阵列、平面反射镜、半反半透镜和液晶空间光调制器的集成,构建二维的榕树交换网实验模块,利用微闪耀光栅的衍射特性,控制每块微闪耀光栅的周期,以实现入射光信号不同方向的闪耀输出,最终完成二维榕树网自由空间水平和竖直方向上的交叉互连,直通则由平面镜反射实现。对二维榕树网实验模块的功能分析表明,该实验模块理论上可以完成4×4二维面阵内光信号(或数据)的排序、交换、组播、广播、矩阵变换等操作,具有交换透明、速度快、空间带宽高等特点,在全光交换和光通信中具有一定的应用。     

ADSS光缆的力学计算

介绍了ADSS光缆的力学计算，给出了光缆弧垂、张力、应变和悬长等计算公式，并对普遍采用的“悬链线”和“抛物线”两种计算方法加以比较。     

Fuzzy rule interpolation for multidimensional input spaces in determining d50c of hydrocyclones

Fuzzy rule-based systems have been very popular in many engineering applications. In mineral engineering, fuzzy rules are normally constructed using some fuzzy rule extraction techniques to establish the determination model in predicting the d50c of hydrocyclones. However, when generating fuzzy rules from the available information, it may result in a sparse fuzzy rule base. The use of more than one input variable is also common in hydrocyclone data analysis. This paper examines the application of fuzzy interpolation to resolve the problems using sparse fuzzy rule bases, and to perform analysis of fuzzy interpolation in multidimensional input spaces.     

膨胀水泥浆体系在苏丹1/2/4区块水平井固井中的应用

随着苏丹1／2／4区块的深入开发，为了加快开发主力油层，提高原油产量，降低钻井成本，GNPOC在此区块布置水平井开发任务。所开发的区域主要分布于Heglig，Munga，Simbir，Bamboo区块，油层所在是Zaqar和Bentiue地层。此层位具有高渗透，地层温度高，易塌、气窜等复杂问题，尤其是Heglig和Munga地区井壁坍塌严重。为此，根据地质资料、井身结构和对水平井注水泥的技术要求，科学合理设计施工工艺，优选出适合此地区固井施工的冲洗液和隔离液，特别是经过努力实践，开发出了新型膨胀水泥浆体系，此体系具有高强度、低失水、无析水、防气窜之功效。结合使用哈里伯顿CPT—Y4大功率固井车，精确计量和自动密度控制，该体系水泥浆目前已在7口水平井施工中得以应用，均为优质井。现正在被大量使用，此体系的开发，解决了该固井技术难题，创造了中国固井在海外首次水平井作业一次成功的历史记录，具有较高的经济和社会效益。     

纯铜双层辉光离子渗钛组织形成机理及性能分析

采用双层辉光离子渗金属技术对纯铜进行了渗钛处理。用配有能谱仪(EDS)的扫描电子显微镜(SEM)、X射线衍射仪和透射电子显微镜对合金层的显微组织形貌、钛含量分布、相组成及相结构类型进行了观察与测定，对合金层的形成机理进行了探讨，并对其性能进行了对比测定。结果表明：渗钛层由合金层和扩散层组成，合金层主要由TiCu (Cu)固溶体 TiCu4构成，TiCu4为Dla型有序相，TiCu为B2型有序相，扩散层为(Cu)固溶体。渗钛处理后纯铜的表面得到显著强化。     

Optimal number of periodic preventive maintenance operations under warranty

This paper considers determination of the optimal number of periodic preventive maintenance operations during the warranty period. The hazard rate after preventive maintenance lies between as good as new and as bad as old. After minimal repair, the hazard rate of the system remains unchanged. Free and modified warranty policies are considered with a numerical example using the Weibull case.     

连铸坯红送热装应用效果分析

对加热炉用连铸坯红送热装效果的分析结果表明，该技术的应用可节能降耗，提高产量和加热质量。     

从120号溶剂油中提取正庚烷并回收甲基环己烷的研究

总结了国内外正庚烷的生产状况和市场行情，分析了中小型石化企业生产正庚烷的可行件，提出采用萃取精馏分离正庚烷的方法．在间歇精馏塔塔顶温度为91-101℃、塔釜为103-110℃的条件下，可以得到58％以上正庚烷和甲基环己烷的混合液．根据物质相关性质，初步确定有关萃取溶剂，利用单级循环汽液平衡釜对初选的萃取剂进行实验研究，选定乙二醇作为萃取剂，为进一步实验研究提供依据．     

Accelerated wear testing with a microfabricated surface to evaluate the lubrication ability of biomolecules on polyethylene

Wear of ultrahigh‐molecular‐weight polyethylene (UHMWPE) and wear‐particle‐induced osteolysis and bone resorption are the major factors causing the failure of total joint replacements. It is feasible to improve the lubrication and reduce the wear of artificial joints. We need further understanding of the lubrication mechanism of the synovial fluid. The objective of this study is to evaluate the lubricating ability of three major components in the synovial fluid: albumin, globulin, and phospholipids. An accelerated wear testing procedure in which UHMWPE is rubbed against a microfabricated surface with controlled asperities has been developed to evaluate the lubrication behavior. An analysis of the wear particle dimensions and wear amount of the tests has provided insights for comparing their lubrication performance. It is concluded that the presence of biomolecules at the articulating interface may reduce friction. A higher concentration of a biological lubricant leads to a decrease in the wear particle width. In addition, in combination with the wear results and mechanical analysis, the roles of individual biomolecules contributing to friction and wear at the articulating interface are discussed. These results can help us to identify the role of the biomolecules in the boundary lubrication of artificial joints, and further development of lubricating additives for artificial joints may be feasible. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008