Fluidized Bed Air Drying: Experimental Study and Model Development

The presented study describes the processes and mechanisms of batch fluidized bed drying. The influencing factors of hot air drying are theoretically and experimentally examined, in order to present the relations between temperature and humidity profiles and all other drying parameters. A physical model is presented to facilitate the calculation of the drying processes under defined conditions. Three succeeding drying stages are therefore modeled. Mass and energy balances including all components taking part in the process are formulated. The model clarities the drying process under the assumption of pure heat transfer mechanisms. It does not contain adaptive parameters and takes into account an inactive bypass fraction of the fluidization and drying medium. The evaluation of the model was successful for two fluidized bed plants with nominal widths of 100 mm and 400 mm. The experiments showed sufficient accuracy and transferability of the model to equipment of application‐oriented dimensions.     

Enzymatic esterification of glycerol II. Lipase-catalyzed synthesis of regioisomerically pure 1(3)-rac-monoacylglycerols

Regioisomerically pure 1(3)-rac-monoacylglycerols are conveniently prepared in high yields (>75%) and in multigram quantities by enzymatic esterification of glycerol in the presence of various lipases(Chromobacterium viscosum, Rhizopus delemar, Rhizomucor miehei) with a variety of different acyl donors, such as free fatty acids, fatty acid alkyl esters, vinyl esters and triacylglycerols, as well as natural fats and oils. All reactions are carried out in aprotic organic solvents with low water content, namelyn-hexane, diethyl ether, tBuOMe or mixtures of these solvents. Essential for the success of these transformations were the following two factors. First, the creation of an artificial interphase between the solvent-immiscible hydrophilic glycerol and the hydrophobic reaction medium by its adsorption onto a solid support. Second, a facile system for the separation of the desired monoacylglycerol from the reaction mixture, coupled with the continuous recycling of acyl donor and undesirable by-products.     

An in situ Raman study of the intercalation of supercapacitor-type electrolyte into microcrystalline graphite

An initial Raman study on the effects of intercalation for aprotic electrolyte-based electrochemical double-layer capacitors (EDLCs) is reported. In situ Raman microscopy is employed in the study of the electrochemical intercalation of tetraethylammonium (Et₄N⁺) and tetrafluoroborate (BF₄⁻) into and out of microcrystalline graphite. During cyclic voltammetry experiments, the insertion of Et₄N⁺ into graphite for the negative electrode occurs at an onset potential of +1.0 V versus Li/Li⁺. For the positive electrode, BF₄⁻ was shown to intercalate above +4.3 V versus Li/Li⁺. The characteristic G-band doublet peak (E_2g2(i) (1578 cm⁻¹) and E_2g2(b) (1600 cm⁻¹)) showed that various staged compounds were formed in both cases and the return of the single G-band (1578 cm⁻¹) demonstrates that intercalation was fully reversible. The disappearance of the D-band (1329 cm⁻¹) in intercalated graphite is also noted and when the intercalant is removed a more intense D-band reappears, indicating possible lattice damage. For cation intercalation, such irreversible changes of the graphite structure are confirmed by scanning electron microscopy (SEM).     

Enzymatic esterification of glycerol I. Lipase-catalyzed synthesis of regioisomerically pure 1,3-sn-diacylglycerols

Regioisomerically pure 1,3-sn-diacylglycerols are conveniently prepared in high yields (>80%) and in large quantities by enzymatic esterification of glycerol in the presence of various 1,3-selective lipases(Chromobacterium viscosum, Rhizopus delemar, Rhizomucor miehei) and a variety of different acyl donors like free fatty acids, fatty acid alkyl esters and vinyl esters. All reactions are carried out in aprotic organic solvents of low water content, namelyn-hexane, diethyl ether or tBuOMe. The creation of an artificial interphase between the solvent-immiscible hydrophilic glycerol and the hydrophobic reaction media by the adsorption of glycerol onto a solid support prior to use was essential for the success of these transformations. The effects of reaction conditions and the regioselectivities of the lipases on the product yields are described in detail.     

On the correspondence between abstract dialectical frameworks and nonmonotonic conditional logics

Annals of Mathematics and Artificial Intelligence - The exact relationship between formal argumentation and nonmonotonic logics is a research topic that keeps on eluding researchers despite recent...     

Surface reconstruction for incremental forming

In spite of extensive efforts being made with regard to virtual process optimization technology, the production of prototype parts is still a necessity. With respect to the production of sheet metal parts in low quantities, incremental sheet metal forming (ISMF) is a highly interesting process. ISMF allows the production of complex parts with drastically reduced costs in tooling and machinery compared to conventional processes like deep drawing. However, ISMF, with it’s incremental nature, introduces the need for generating a tool path considering both final geometry and process-induced deviations or constraints. Consequently, for the generation of the tool path a (tool path) surface, with an adequate offset, is necessary. That is why, within the scope of extensive research work at the Institute of Forming Technology and Lightweight Construction (IUL), a special correction module has been developed, determining this offset e.g. depending on the workpiece geometry. This paper presents the algorithm, the application, and the effect on the produced parts. Furthermore, a concept for an extension regarding further constraints like elastic workpiece behavior is presented.     

Investigation of wetting behaviour of hardenable copper based-alloys for brazing applications

ABSTRACT

Tools for machining are exposed to high loads, wear, and elevated temperatures. Commonly, such tools consist of cemented carbides and tool steel. To combine the advantages of both materials, high-quality-joints with high strengths are desired. When brazing these materials, the main challenge is the mismatch of the Coefficient of Thermal Expansion (CTE) and the poor wettability of cemented carbides by molten filler alloys. In this regard, the feasibility of two custom-made alloys (CuNi12Si5, CuNi12Si5B0.4) was analysed. Besides being a cost-efficient alternative, these alloys offer the possibility to modify their mechanical properties by precipitation hardening to reduce stresses within the final joints. Thus, this paper shows that a temperature of 1060°C is suitable for wetting and brazing tests on different substrates.     

Insight into spontaneous recurrent calcium waves in a 3-D cardiac cell based on analysis of a 1-D deterministic model

Calcium dynamics in a cardiac cell are described by a system of 3-D non-linear stochastic partial differential equations. To obtain solutions that have biophysical properties, it is necessary to explore the model parameter space. To decrease the complexity of the parameter search, we reduce the 3-D stochastic model to a 1-D deterministic model. The reduction of the problem from 3-D to 1-D is done through an asymptotic approximation after non-dimensionalization and based on rational biophysical assumptions of the 3-D domain; the stochastic to deterministic transformation is based on the regular property of the 3-D solution. The result of the model reduction proves very effective in reducing the time required to get qualitative as well as quantitative information about parameter regions in the 3-D stochastic model including calcium dynamics (sparks, wave propagation, and recovery) observed in cardiac cells.     

Business process compliance checking – applying and evaluating a generic pattern matching approach for conceptual models in the financial sector

Given the strong increase in regulatory requirements for business processes the management of business process compliance becomes a more and more regarded field in IS research. Several methods have been developed to support compliance checking of conceptual models. However, their focus on distinct modeling languages and mostly linear (i.e., predecessor-successor related) compliance rules may hinder widespread adoption and application in practice. Furthermore, hardly any of them has been evaluated in a real-world setting. We address this issue by applying a generic pattern matching approach for conceptual models to business process compliance checking in the financial sector. It consists of a model query language, a search algorithm and a corresponding modelling tool prototype. It is (1) applicable for all graph-based conceptual modeling languages and (2) for different kinds of compliance rules. Furthermore, based on an applicability check, we (3) evaluate the approach in a financial industry project setting against its relevance for decision support of audit and compliance management tasks.     

Backscatter from the data plane – Threats to stability and security in information-centric network infrastructure

Information-centric networking (ICN) raises data objects to first class routable entities in the network and changes the Internet paradigm from host-centric connectivity to data-oriented delivery. However, current approaches to content routing heavily rely on data-driven protocol events and thereby introduce a strong coupling of the control to the data plane in the underlying routing infrastructure. In this paper, threats to the stability and security of the content distribution system are analyzed in theory, simulations, and practical experiments. We derive relations between state resources and the performance of routers, and demonstrate how this coupling can be misused in practice. We further show how state-based forwarding tends to degrade by decorrelating resources. We identify intrinsic attack vectors present in current content-centric routing, as well as possibilities and limitations to mitigate them. Our overall findings suggest that major architectural refinements are required prior to global ICN deployment in the real world.