Patterned epidermal cell death in wild-type and segment polarity mutant Drosophila embryos

Programmed cell death plays an essential role in the normal embryonic development of Drosophila melanogaster. One region of the embryo where cell death occurs, but has not been studied in detail, is the abdominal epidermis. Because cell death is a fleeting process, we have used time-lapse, fluorescence microscopy to map epidermal apoptosis throughout embryonic development. Cell death occurs in a stereotypically striped pattern near both sides of the segment border and to a lesser extent in the middle of the segment. This map of wild-type cell death was used to determine how cell death patterns change in response to genetic perturbations that affect epidermal patterning. Previous studies have suggested that segment polarity mutant phenotypes are partially the result of increased cell death. Mutations in wingless, armadillo, and gooseberry led to dramatic increases in apoptosis in the anterior of the segment while a naked mutation resulted in a dramatic increase in the death of engrailed cells in the posterior of the segment. These results show that segment polarity gene expression is necessary for the survival of specific rows of epidermal cells and may provide insight into the establishment of the wild-type epidermal cell death pattern.     

Quantum monte carlo methods for electronic structure of nanosystems

We provide a brief review of recent applications of quantum Monte Carlo (QMC) methods to the electronic structure of nanosystems. We report on calculations of carbon rings with second-order Jahn-Teller effect, energy ordering of silicon clusters, dissociation enthalpies of protonated hydrogen clusters, and other interesting challenges. We point out the QMC accuracy and outline a few ideas that characterize the current position of QMC among the electronic structure methods and its future development.     

Effect of preheat setting process on heat,mass and air transfer in plain socks

Socks are prevented against wrinkle formation by preheat setting in greige form prior to wet processing. The current study is proposed to analyze the effect of socks presetting process on thermopysiological and wicking properties of comfort. In this analysis, main yarn linear density, plaiting yarn composition and number of needles are taken as variable on same machine setting. Sock samples were analyzed for comfort parameters (thermal conductivity, thermal resistivity, thermal absorptivity, thermal diffusivity, relative water vapor permeability (RWVP (%)), evaporation resistance (Ret), air permeability, vertical wicking, absorbency and color strength (K/S) value) after various processes (preheat setting, dyeing and postheat setting). The statistical analysis showed that preheat set process significantly affects vertical wicking, K/S value, absorbency, thermal conductivity, thermal resistivity and thermal diffusivity, respectively. While thermal absorptivity, air permeability, porosity, RWVP (%) and R_et couldn’t show a significant impact.     

Stabilization/solidification of munition destruction waste by asphalt emulsion

Destruction of discarded military munitions in an explosion chamber produces two fractions of hazardous solid waste. The first one is scrap waste that remains in the chamber after explosion; the second one is fine dust waste, which is trapped on filters of gas products that are exhausted from the chamber after explosion. The technique of stabilization/solidification of the scrap waste by asphalt emulsion is described in this paper. The technique consists of simple mixing of the waste with anionic asphalt emulsion, or two-step mixing of the waste with cationic asphalt emulsion. These techniques are easy to use and the stabilized scrap waste proves low leachability of contained heavy metals assessed by TCLP test. Hence, it is possible to landfill the scrap waste stabilized by asphalt emulsion. If the dust waste, which has large specific surface, is stabilized by asphalt emulsion, it is not fully encapsulated; the results of the leaching tests do not meet the regulatory levels. However, the dust waste solidified by asphalt emulsion can be deposited into an asphalted disposal site of the landfill. The asphalt walls of the disposal site represent an efficient secondary barrier against pollutant release.     

The Role of Tenascin C in Cardiac Reverse Remodeling Following Banding–Debanding of the Ascending Aorta

Background: Tenascin-C (TN-C) plays a maladaptive role in left ventricular (LV) hypertrophy following pressure overload. However, the role of TN-C in LV regression following mechanical unloading is unknown. Methods: LV hypertrophy was induced by transverse aortic constriction for 10 weeks followed by debanding for 2 weeks in wild type (Wt) and TN-C knockout (TN-C KO) mice. Cardiac function was assessed by serial magnetic resonance imaging. The expression of fibrotic markers and drivers (angiotensin-converting enzyme-1, ACE-1) was determined in LV tissue as well as human cardiac fibroblasts (HCFs) after TN-C treatment. Results: Chronic pressure overload resulted in a significant decline in cardiac function associated with LV dilation as well as upregulation of TN-C, collagen 1 (Col 1), and ACE-1 in Wt as compared to TN-C KO mice. Reverse remodeling in Wt mice partially improved cardiac function and fibrotic marker expression; however, TN-C protein expression remained unchanged. In HCF, TN-C strongly induced the upregulation of ACE 1 and Col 1. Conclusions: Pressure overload, when lasting long enough to induce HF, has less potential for reverse remodeling in mice. This may be due to significant upregulation of TN-C expression, which stimulates ACE 1, Col 1, and alpha-smooth muscle actin (α-SMA) upregulation in fibroblasts. Consequently, addressing TN-C in LV hypertrophy might open a new window for future therapeutics.     

Investigation of the effect of molar mass on coating properties of self-crosslinking latexes based on acrylic microgels

The effect of reducing the molar mass of the shell layer of core–shell latex particles on film-forming and final coating properties of self-crosslinking latexes was investigated. Latex particles were prepared by the semi-continuous non-seeded emulsion polymerization of methyl methacrylate, butyl acrylate and methacrylic acid as main monomers. The particle core was slightly cross-linked (using a constant amount of allyl methacrylate as a comonomer) to prevent the copolymers forming the core phase from migration into the shell phase. For interfacial cross-linking, diacetone acrylamide was copolymerized into the shell layer of latex particles to provide sites for subsequent reaction with adipic acid dihydrazide. The molar mass of copolymers forming the shell layer was systematically varied by isooctyl 3-mercaptopropionate chain transfer agent included in the synthesis of each of the shell layers and the molar mass distribution was determined using size exclusion chromatography coupled with a multi-angle light scattering detection. Fundamental properties of latexes and cast films were systematically compared. These properties included minimum film-forming temperature, pendulum hardness, adhesion, impact resistance, stress–strain properties as well as the characterization of water absorption. The results confirmed theoretical predictions and described empirically the effects of reducing the molar mass of the shell layer copolymer on final properties of coating films.     

Characterization of molecular structure of acrylic copolymers prepared via emulsion polymerization using A4F‐MALS technique

The study is primarily focused on the possibility to utilize organic asymmetric flow field‐flow fractionation (A4F) coupled to a multi‐angle light scattering (MALS) detector for the characterization of copolymers of methyl methacrylate with various acrylates prepared by emulsion polymerization. The effects of acrylate monomer type and content on the molar mass distribution and degree of branching of acrylic copolymers have been studied by A4F‐MALS using tetrahydrofuran as a carrier solvent. It has been found that the growing amount of acrylate results in the increase of molar mass, polydispersity, and branching degree as a result of chain transfer to polymer. Highly branched compact macromolecules with ultra‐high molar mass were identified in all copolymers containing a high level of acrylate. In contrast to size traditionally used exclusion chromatography, organic A4F‐MALS has been proved as a very efficient technique for the characterization of high molar mass acrylic emulsion copolymers. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40995.     

High temporal resolution oxygen imaging in bioirrigated sediments

A technique is presented for temporal characterization of the bioirrigation activity of benthic macrofauna and for quantitative estimation of its effects on the oxygen exchange between the sediment and the overlying water. The technique is based on high temporal resolution (15-30 s) oxygen imaging aided by a planar oxygen optode and can be applied under laboratory and field conditions, both freshwater and marine. It allows direct observation of the complex 2D oxygen dynamics in the sediment around the burrow while the animal dwells undisturbed in its natural environment. The conditions to which the animal is exposed can easily be controlled or manipulated. Chironomus plumosus, widely distributed freshwater insect larvae, were used in a case study. Their bioirrigation activity was divided into a random succession of pumping intervals (duration 5.4 +/- 1.7 min) and rest periods (duration 9.2 +/- 5.8 min). The burrow ventilation resulted in a highly variable volume of the oxygenated sediment surrounding the burrow and the associated sedimentary oxygen uptake rate through the burrow wall (OUB), both changing dramatically within minutes. Their variability was higher in a burrow under construction than around a stationary burrow. The average OUB rate (approximately 0.15 micromol O2 h(-1)), when translated into a time-averaged 02 flux across the burrow wall, constituted approximately 64% of the stationary diffusive oxygen flux measured at the sediment-water interface (approximately0.9 mmol O2 m(-2) h(-1)).     

Optimization of absorption-based optical chemical sensors that employ a single-reflection configuration

An optimization strategy for a generic absorption-based optical chemical sensor that employs a single-reflection planar configuration is reported. A theoretical model describing the sensor sensitivity is presented and verified experimentally. It is shown that optimum sensitivity is not achieved with an evanescent-wave sensing technique but with a configuration in which the interrogating light propagates within the sensing layer. Moreover, an optimization strategy based on identification of an optimized reflection angle is described. This analysis provides an optimization strategy that is extendable to multimode waveguide platforms. The predictions of the model are used in the design of a prototype LED-based sensor system. The performance of this system is examined, and the results are compared with alternative absorption-based sensor configurations.