Effects of three crosslinkers on colored pH‐responsive core–shell latexes

Environmentally responsive hydrogels have become attractive research subjects for many applications. In this work, a series of pH‐sensitive and color‐changing nanoparticles (nanogels) with core–shell structures were synthesized. The cores were blue latex particles synthesized by a miniemulsion technique with styrene and methacrylic acid as monomers and Neozapon Blue 807 as a dye. The shell was a pH‐sensitive polymer that was precipitation‐polymerized onto the core from 2‐(diethylamino) ethyl methacrylate with N,N′‐methylenebisacrylamide, poly(propylene glycol) diacrylate, and divinylbenzene as crosslinking agents. In the resultant latexes, the color was observed to change from deep blue to pale blue as the pH of the system was changed from a high of 10 to a low of 3. The synthesized latexes and particles (gels) were then characterized with an ultraviolet–visible spectrometer, dynamic light scattering, Fourier transform infrared, and nuclear magnetic resonance. Atomic force microscopy was also used to investigate the different morphologies of the particles after the synthesized latexes were dried at different pH values. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

pH and salt responsive poly(N,N-dimethylaminoethyl methacrylate) cylindrical brushes and their quaternized derivatives

We present the synthesis and characterization of poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) cylindrical brushes, their pH responsiveness, and the corresponding quaternized analog, poly{[2-(methacryloyloxy)ethyl] trimethylammonium iodide} (PMETAI) brushes. PDMAEMA brushes were prepared by atom transfer radical polymerization (ATRP) using the grafting-from strategy. Initiating efficiencies of the ATRP processes were determined by cleaving the side-chains and gel permeation chromatography (GPC) analysis. Due to the slow initiation and steric hindrance, the initiating efficiency is only around 50%. The PDMAEMA brushes show worm-like structures and pH responsiveness, as proven by dynamic light scattering (DLS), atomic force microscopy (AFM), and cryogenic transmission electron microscopy (cryo-TEM) measurements. Strong cationic polyelectrolyte PMETAI brushes were produced by quaternization of the PDMAEMA brushes. AFM and cryo-TEM images showed similar worm-like morphologies for the PMETAI brushes. The PMETAI brushes collapsed in solution with high concentration of monovalent salt, as proven by DLS and AFM results.     

Effects and properties of poly(arylene ether benzonitrile)s of various molecular weights blended with sulfonated poly(ether ether ketone)

Poly(arylene ether benzonitrile) (PAEBN) was synthesized with 2,6‐dichlorobenzonitrile and biphenol. PAEBNs with various molecular weights (MWs), 1,640,000 and 185,000 g/mol, were synthesized by control of the stoichiometry of the monomers and were blended with sulfonated poly(ether ether ketone) (SPEEK). The effects of MW on the water uptake, swelling, methanol permeability, and proton conductivity of the SPEEK/PAEBN blend membranes were investigated. The molecular mobility of the SPEEK/PAEBN blends was also examined in this study. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

导向剂加入方式对Y型沸石合成的影响

以煤系高岭土为原料,采用液态补硅手段调节体系SiO2/Al2O3、导向剂两步加入法合成了Y型沸石.考察了导向剂不同加入方式对Y型沸石合成的影响.采用合理的导向剂两步加入法,特别是通过控制导向剂第二步加入的时间,可明显缩短Y型沸石的晶化时间,并有效地减少P型沸石的生成.     

钢包炉(LF)预熔精炼渣的研究

预熔精炼渣具有成分均匀，性能稳定，储存时不吸水等特点，钢包炉中使用预熔精炼渣时成渣均匀且速度快，具有较强的吸附钢中非金属夹杂的能力。综合脱硫率高等冶金效果。有显著净化钢液作用。     

浅谈浸出油厂厂区消防设计

浸出油厂的厂区消防安全是保证企业正常生产的关键.本文对浸出油厂厂区总平面布置、防火间距、消防通道及消防设施等几个方面作了系统阐述.     

丰满流域可能最大暴雨与可能最大洪水分析研究

依据丰满漉域的水文气象资料,计算丰满流域可能最大暴雨,推求白丰区间的可能最大洪水并进行成果合理性分析.     

采煤机液压系统油液污染监测与控制方法研究

分析引起采煤机液压系统油液污染的主要根源，在油液污染动态平衡分析的基础上，提出了实现采煤机液压系统油液污染监测和污染控制基本方法。     

KEIO/72000/0.003型电抗器替代进口设计

本文通过分析电炉电极间短路电流，确定电抗器主要技术参数及设计依据。