Tunable microfluidic microlenses

A novel type of liquid microlens, bounded by a microfabricated, distensible membrane and activated by a microfluidic liquid-handling system, is presented. By use of an elastomer membrane fabricated by spin coating onto a dry-etched silicon substrate, the liquid-filled cavity acts as a lens whereby applied pressure changes the membrane distension and thus the focal length. Both plano-convex and plano-concave lenses, individual elements as well as arrays, were fabricated and tested. The lens surface roughness was seen to be approximately 9 nm rms, and the focal length could be tuned from 1 to 18 mm. This lens represents a robust, self-contained tunable optical structure suitable for use in, for example, a medical environment.     

Psychological impact of air velocity variations in a ventilated room

Two experiments investigated the psychological impact of two velocity conditions (constant low velocity (V1) and variations of low and high velocity (V2)) in two temperature conditions (Experiment 1: an air temperature increase from 21 degrees C to 24 degrees C; Experiment 2: an air temperature increase from 25 degrees C to 27 degrees C) in females and males, aged 16 to 18 years, under realistic classroom conditions during an exposure period of 80 min. It was predicted that the V2 room condition compared to the V1 room condition would be more beneficial for subjects' perceived room temperature and air quality, self-reported affect and cognitive performance. The results obtained showed no significant effects on cognitive performance. However and as predicted, in Experiment 1, the subjects in the V2 compared to those in the V1 room condition felt that the air temperature decreased (while it de facto increased) and reported a constant level of high activation. In Experiment 2, the subjects in the V2 room condition felt that the air temperature increased less and reported that their unactivated unpleasantness increased less and activated pleasantness decreased less than it did for subjects in the V1 room condition. All this indicates, as was suggested by Wig? et al. (2002), that a cooling effect, induced by air velocity variations, might be beneficial for subjects in a ventilated room and that their perceived pleasantness of the indoor climate could be met at a higher room temperature than otherwise.     

Length-dependent extraction of single-walled carbon nanotubes

A two-phase liquid-liquid extraction process is presented which is capable of extracting water-soluble single-walled carbon nanotubes into an organic phase. The extraction utilizes electrostatic interactions between a common phase transfer agent and the sidewall functional groups on the nanotubes. Large length-dependent van der Waals forces for nanotubes allow the ability to control the length of nanotubes extracted into the organic phase as demonstrated by atomic force microscopy.     

Docosahexaenoic acid supplementation in vegetarians effectively increases omega-3 index: A randomized trial

Low red blood cell (RBC) membrane content of FPA+DHA (hereafter called omega-3 index) has recently been described as an indicator for increased risk of death from coronary heart disease. The relationship between plasma and RBC FA, focusing on omega-3 index, and the response to DHA supplementation were investigated in a double-blind, randomized, placebo-controlled, intervention study. Healthy vegetarians (87 f, 17 m) consumed daily a microalgae oil from Ulkenia sp. (0.94 g DHA/d) or olive oil (placebo) for 8 wk. DHA supplementation significantly increased DHA in RBC total lipids (7.9 vs. 4.4 wt%), in RBC PE (12.1 vs. 6.5 wt%), in RBC PC (3.8 vs. 1.4 wt%), and in plasma phospholipids (PL) (7.4 vs. 2.8 wt%), whereas EPA levels rose to a much lesser extent. Microalgae oil supplementation increased the omega-3 index from 4.8 to 8.4 wt%. After intervention, 69% of DHA-supplemented subjects (but no subject of the placebo group) reached an omega-3 index above the desirable value of 8 wt%. Omega-3 index and EPA+DHA levels in RBC PE, RBC PC, and plasma PL were closely correlated (r always >0.9). We conclude that an 8-wk supplementation with 0.94 g DHA/d from microalgae oil achieves a beneficial omega-3 index of ≥8% in most subjects with low basal EPA+DHA status. RBC total FA analyses can be used instead of RBC lipid fraction analyses for assessing essential FA status, e.g., in clinical studies.     

Biotransformation of 2-Benzoxazolinone to 2-Amino-(3<Emphasis Type="Italic">H</Emphasis>)-Phenoxazin-3-one and 2-Acetylamino-(3<Emphasis Type="Italic">H</Emphasis>)-Phenoxazin-3-one in Soil

An alternative to the use of synthetic pesticides is to exploit the natural defense chemicals produced by cereals. An important class of allelochemicals is cyclic hydroxamic acids and related benzoxazolinones. A prolonged degradation experiment of the allelochemical compound from rye 2-benzoxazolinone (BOA) was carried out for up to 90 d at 15°C at three different concentration levels, 3, 3000, and 30,000 nmol BOA· g soil^–1, respectively, in a sandy loam soil. Two main degradation products, 2-amino-(3H)-phenoxazin-3-one (APO) and 2-acetylamino-(3H)-phenoxazin-3-one (AAPO), were identified and quantified by LC-ESI-MS-MS. The half-life of BOA increased with higher levels of BOA added to the soil. Half-lives of BOA, APO, and AAPO were determined by fitting a single first-order model to the degradation data. Half-life of BOA was determined to be 0.6 d in the 3 nmol BOA g soil^–1 treatment. Half-lives of BOA, APO, and AAPO were 3.1, 2.7, and 2.1 d, respectively, in the 3000 nmol BOA· g soil^–1 treatment. In the 30,000 nmol BOA· g soil^–1 treatment, the half-lives were 31 d for BOA and 45 d for APO. The microbial community structure was not affected by addition of BOA to the soil as investigated by analysis of signature fatty acids. The results suggest that the exploitability of BOA for crop protection is dependent on the existing concentration of BOA in the soil and the timing of incorporation of hydroxamic acid synthesizing crops into the soil.     

Fischer–Tropsch principles of co-hydrogenation on iron catalysts

The temporal changes of product composition together with changes of the catalyst in composition and structure have been investigated for Fischer–Tropsch synthesis with an alkalized precipitated iron catalyst at 250°C, 1 MPa, using a special synthesis gas with a molar H₂/CO₂-ratio of three. It was observed that the steady state of synthesis developed in processes of self-organization during several episodes with individual kinetic regimes. Thetrue FT catalyst apparently was constructed at reaction conditions under complete consumption of -iron and formation of iron carbide (Fe₅C₂). The magnetite phase disappeared partially and a new unknown (probably FeO_x) phase was formed. It has been concluded from the data of chain growth and branching probability that during self-organization only the number of sites increased but their nature remained unchanged. Strong spatial constraints appear to apply at the sites. On iron catalysts, the FT sites are very stable, invariant against changes in reaction conditions, in contrast to FT synthesis on cobalt. There the sites show a dynamic behavior.     

Exchanging the substrate specificities of pyruvate decarboxylase from Zymomonas mobilis and benzoylformate decarboxylase from Pseudomonas putida

Pyruvate decarboxylase from Zymomonas mobilis (PDC) and benzoylformate decarboxylase from Pseudomonas putida (BFD) are thiamine diphosphate-dependent enzymes that decarboxylate 2-keto acids. Although they share a common homotetrameric structure they have relatively low sequence similarity and different substrate spectra. PDC prefers short aliphatic substrates whereas BFD favours aromatic 2-keto acids. These preferences are also reflected in their carboligation reactions. PDC catalyses the conversion of benzaldehyde and acetaldehyde to (R)-phenylacetylcarbinol and predominantly (S)-acetoin, whereas (R)-benzoin and mainly (S)-2-hydroxypropiophenone are the products of BFD catalysis. Comparison of the X-ray structures of both enzymes identified two residues in each that were likely to be involved in determining substrate specificity. Site-directed mutagenesis was used to interchange these residues in both BFD and PDC. The substrate range and kinetic parameters for the decarboxylation reaction were studied for each variant. The most successful variants, PDCI472A and BFDA460I, catalysed the decarboxylation of benzoylformate and pyruvate, respectively, although both variants now preferred the long-chain aliphatic substrates, 2-ketopentanoic and 2-ketohexanoic acid. With respect to the carboligase activity, PDCI472A proved to be a real chimera between PDC and BFD whereas BFDA460I/F464I provided the most interesting result with an almost complete reversal of the stereochemistry of its 2-hydroxypropiophenone product.     

Sediment dilution method to determine sorption coefficients of hydrophobic organic chemicals

Sorption coefficients of hydrophobic organic chemicals (HOC) to sediments and soils can easily be underestimated in traditional batch experiments, especially because analysis of the aqueous concentration often includes compounds sorbed to colloidal organic matter. In this work, a "sediment dilution approach" has been combined with measurements of freely dissolved concentrations to determine sorption coefficients of five chlorobenzenes and two chloroanilines in spiked sediment and of two unknown chemicals in field-contaminated sediment. A range of sediment suspensions with different sediment-water ratios was made. Freely dissolved concentrations in these suspensions were measured by negligible depletion solid-phase microextraction (nd-SPME). Sediment-water sorption coefficients (KD) were derived from the decrease of the freely dissolved concentrations as a function of the "dilution factor" (DF = volume water/mass sediment). The determined sorption coefficients were very similar to literature values. The experimental setup provides sorption coefficients without the need for total extractions, and the negligible depletion SPME technique does not require phase separation. The proposed method might be an alternative for batch equilibrium experiments to determine sorption coefficients.     

Predicting methyl tert-butyl ether, tert-butyl formate, and tert-butyl alcohol levels in the environment using the fugacity approach

Through its extensive use as a fuel oxygenate, methyl tert-butyl ether (MTBE) is found nearly ubiquitouslythroughout the environment. To better understand the environmental fate of MTBE, fugacity models are commonly used. However, models developed by the scientific community and by governmental bodies differ in their predictions of relative MTBE concentrations for relevant environmental compartments and of seasonal concentration variations; further, to date they have not considered the formation of transformation products. In this study, the sensitivity of predicted environmental concentrations of MTBE and its two major degradation products, tert-butyl formate (TBF) and tert-butyl alcohol (TBA), to all types of model input parameters is analyzed in a probabilistic sensitivity analysis. This analysis allowed for an assessment of the most influential parameters for predicting soil, water, and air concentrations and thereby provided insight into why previous modeling studies on MTBE differed. Further, the information from the sensitivity analysis was used to parametrize a multispecies transformation model for predicting European concentration levels of MTBE and, for the first time, TBF and TBA. Water and air concentrations of MTBE predicted with the transformation model were in good agreement with measurements of environmental samples. No studies are available on environmental TBF and TBA levels to compare with model predictions; however, the modeling results indicate that, in the water phase, TBA concentrations may reach appreciable levels. One major uncertainty identified regarding the prediction of TBA levels was the fraction of TBA formed from atmospheric MTBE and TBF.