Ultrahigh-performance planar β-Ga_2O_3 solar-blind Schottky photodiode detectors

The low dark current, high responsivity and high specific detectivity could be preferably achieved in detectors based on junctions, owing to the efficient constraint of carriers. Compared with the other junctions, planar Schottky junctions have simple structures and technological demands and are easy integrated. Herein, in this work, we prepared the β-Ga_2O_3 thin film by metalorganic chemical vapor deposition method to construct planar Ti/β-Ga_2O_3/Ni Schottky photodiode detectors with different onstate resistances. Fortunately, all the devices exhibit state-of-the-art performances, such as responsivity of 175–1372 A W~(-1),specific detectivity of 10~(14) Jones and external quantum efficiency of 85700%–671500%. In addition, the dependences of device performances on the on-state resistances indicate that the higher dark currents, photocurrents and photoresponsivities may well be obtained when on-state resistance is smaller, due to the less external power is used to overcome the impendence and condensance at the Ti/β-Ga_2O_3 and Ni/β-Ga_2O_3 interfaces, but contributing to higher electric current flow both in the dark and under illuminations.     

Genome-Wide Analysis Identified a Set of Conserved lncRNAs Associated with Domestication-Related Traits in Rice

Crop domestication, which gives rise to a number of desirable agronomic traits, represents a typical model system of plant evolution. Numerous genomic evidence has proven that noncoding RNAs such as microRNAs and phasiRNAs, as well as protein-coding genes, are selected during crop domestication. However, limited data shows plant long noncoding RNAs (lncRNAs) are also involved in this biological process. In this study, we performed strand-specific RNA sequencing of cultivated rice Oryza sativa ssp. japonica and O. sativa ssp. indica, and their wild progenitor O. rufipogon. We identified a total of 8528 lncRNAs, including 4072 lncRNAs in O. rufipogon, 2091 lncRNAs in japonica rice, and 2365 lncRNAs in indica rice. The lncRNAs expressed in wild rice were revealed to be shorter in length and had fewer exon numbers when compared with lncRNAs from cultivated rice. We also identified a number of conserved lncRNAs in the wild and cultivated rice. The functional study demonstrated that several of these conserved lncRNAs are associated with domestication-related traits in rice. Our findings revealed the feature and conservation of lncRNAs during rice domestication and will further promote functional studies of lncRNAs in rice.     

Stretchable,Antifreezing, Non-Drying,and Fast-Response Sensors Based on Cellulose Nanocomposite Hydrogels for Signal Detection

Conductive hydrogels have received widespread attention in the applications of biosensors, human–machine interface, and health recording electrodes. Herein, the conductive hydrogels integrated with antifreezing, water retention, reusable, and sensing performances are fabricated by introducing polyvinyl alcohol, cellulose nanofibril, MXene nanosheets, and glycerol. The as-prepared hydrogels present prominent electrical conductivity (2.58 mS cm⁻¹) and flexibility even at −18 °C. In addition, the hydrogels have favorable water retention performance and can reuse after heating and cooling. When used as sensors, the hydrogels illustrate high sensitivity (gauge factor of 2.30), fast response time (0.165 s), wide working strain range (559%), favorable linearity (R² = 0.999), and wide operating temperature range (−18 to 60 °C). The hydrogels can detect not only large strains of 10–200%, but also small strains of 1–5%, making them promising candidates for wearable sensors to monitor large and subtle movements.     

内燃式热风炉燃烧器结构优化

针对内燃式热风炉在燃烧期烟气中CO含量超标问题开展研究工作,提出一种改进型的矩形燃烧器结构,在煤气通道中加入挡板来改变高炉煤气的流动方向。以某公司3号高炉热风炉为研究对象,建立了内燃式热风炉矩形燃烧器和燃烧室的三维模型。利用CFD模拟技术对矩形燃烧器的原始结构和改进后的结构进行燃烧模拟,在矩形燃烧器中加入的煤气挡板分别采用45°、60°、75° 3种倾斜角度放置,分析在不同倾斜角度下的温度场和CO浓度场。与原始结构的结果进行对比,结果表明,优化结构之后燃烧室出口截面的温度场中高温区范围有所扩大,两端眼角处的CO平均体积分数有一定程度减少。当煤气挡板的倾斜角度为60°时出口截面平均温度上升最大,平均温度从1 669 K上升到1 676 K,出口烟气中的CO平均体积分数下降最多,CO平均体积分数从0.007 028%下降到0.005 678%。     

纯铝等径角挤技术（I）——显微组织演化

研究了纯铝在 3种 (A、B和C)不同等径角挤工艺中的显微组织演化。结果表明 :纯铝经过等径角挤压变形后 ,其显微组织特征与加工路线有很大的关系。提出了立方元素扭转模型 ,分析了 3种不同加工路线的剪切面和剪切方向 ,较好地解释了采用 3种不同路线挤压后材料显微组织的演化规律。在路线C(各道次挤压间试样旋转 180°)中 ,每次挤压样品总是在相同的剪切面上发生剪切 ,每相邻道次之间的剪切方向相反 ,前一次变形产生的剪切应变被随后紧接着的下一次挤压所抵消 ,这导致了多余的剪切应变 ;在路线A(各道次挤压间试样不旋转 )中 ,有两个相交成 6 0°的剪切面 ,剪切交替地在两个剪切面上进行 ;在路线B(各道次挤压间试样旋转 90°)中 ,存在 4个不同的剪切面和剪切方向 ,挤压交替地在 4个剪切面上进行 ,X ,Y和Z平面上的晶粒都发生了剪切 ,这有利于等轴晶结构的形成     

低熔点Cu-P基中间合金及其变质效果

利用差示扫描量热仪(DSC)、扫描电子显微镜(SEM)和金相显微镜等手段对Cu-P基中间合金进行了研究。结果表明，在二元共晶Cu-P中间合金中加入一定量的Sn可制成低熔点的Cu-16Sn-8P中间合金；在此基础上研制出一种熔点为630℃左右的低熔点的多元Cu-P基中间合金。与Cu-P中间合金相比，该低熔点多元Cu-P基中间合金对过共晶AI-24Si合金具有更好的变质效果。同时，该中间合金对ZL109合金也具有良好的变质效果。     

550 MPa级中厚板矫直过程中表面凹坑缺陷的成因与对策

针对550 MPa级高强中厚板在矫直过程中极易出现氧化铁皮压入凹坑缺陷的问题，根据现场矫直工艺，研究了在不同温度下进行热变形时试样表面和横截面的形貌，钢基体与氧化铁皮界面处平直度的变化规律。结果表明，热变形温度为450 ℃时，表面氧化铁皮开始出现裂纹，且随着变形温度的降低，裂纹的数量逐渐增加；此外，氧化铁皮与钢基体之间的界面长度随变形温度的降低而呈直线增加，表明氧化铁皮与钢基体界面平直度随着热变形温度的降低越发粗糙、易脱落而形成凹坑缺陷。为此，应适当提高终轧温度以确保矫直时钢板表面温度大于450 ℃，同时提高钢板的运行速率，防止氧化铁皮在低温变形发生破碎和脱落的同时降低氧化铁皮厚度，从而减小因氧化铁皮脱落而造成凹坑缺陷的发生几率。     

SOLUTION BEHAVIOUR OF VARIOUS ALLOYING ELEMENTS IN Ni_3Si

The solid solubilities of 15 common alloying elements added to the Ll_2-type intermetalliccompound Ni_3Si at 900°C have been estimated,and their substitution modes have been de-duced from the direction of solubility lobe of the compound.It is shown that the alloyingbehaviours in Ni_3Si are determined by both size and electronic factors,i.e.,the substitutionmode is governed by electronic configuration and solubility by the both.An interactionparameter is presented to describe quantitatively the influence of electronic configuration onsubstitution mode and the solubility limit can be successfully explained together with atom radius.     

圆柱体锻件内多空洞闭合过程的模拟研究

为了提高锻件质量,减少锻件由于空洞缺陷导致的报废,采用数值模拟和物理模拟相结合的方法,研究了镦粗时圆柱体锻件内多个空洞闭合的过程.模拟结果表明,以双空洞为例,如空洞尺寸不同,大空洞附近变形大,小空洞对变形的影响是局部的;相同大小空洞在闭合过程中,圆柱体中部有封闭的应力、应变的等值线分布区域出现.研究结果推进了对这一问题地深入研究,指出数值模拟的有效性和其与物理模拟相结合的重要性.     

免疫遗传算法在烧结矿配料优化中的应用

运用免疫遗传算法和MATLAB语言 ,编制了钢铁烧结矿配料优化计算仿真程序 ,计算机仿真结果表明符合实际生产工艺要求 ,可直接应用于生产 ,提高各种烧结矿的综合利用率 ,降低成本 1 0 32 %。从而证明了免疫遗传算法是一种切实有效的优化方法 ,该算法为钢铁烧结矿配料问题的优化求解提供了新的思路和方法。