Catalysis of gasification of coal-derived cokes and chars

Calcium is the most important in-situ catalyst for gasification of US coal chars in O₂, CO₂ and H₂O. It is a poor catalyst for gasification of chars by H₂. Potassium and sodium added to low-rank coals by ion exchange and high-rank coals by impregnation are excellent catalysts for char gasification in O₂, CO₂ and H₂O. Carbon monoxide inhibits catalysis of the CH₂O reaction by calcium, potassium and sodium; H₂ inhibits catalysis by calcium. Thus injection of synthesis gas into the gasifier will inhibit the CH₂O reaction. Iron is not an important catalyst for the gasification of chars in O₂, CO₂ and H₂O, because it is invariably in the oxidized state. Carbon monoxide disproportionates to deposit carbon from a dry synthesis gas mixture (3 vol H₂ + 1 vol CO) over potassium-, sodium- and iron-loaded lignite char and a raw bituminous coal char, high in pyrite, at 1123 K and 0.1 MPa pressure. The carbon is highly reactive, with the injection of 2.7 kPa H₂O to the synthesis gas resulting in net carbon gasification. The effect of traces of sulphur in the gas stream on catalysis of gasification or carbon-forming reactions by calcium, potassium, or sodium is not well understood at present. Traces of sulphur do, however, inhibit catalysis by iron.     

Miscibility behavior of blend of polyesteramides of linseed oil and dehydrated castor oil with poly(methacrylic acid)

Blending of two polymers in solution is a simple and cost‐effective technique to improve upon the physical and mechanical properties of the component polymers through synergism. To obtain maximum synergy in their properties, the component polymers should be miscible with each other on molecular scale. Polymer blends of complex physicomechanical properties are being actively investigated. Poly(methacrylic acid) (PMAA), a commercial polymer, yields transparent, hard, brittle, and water‐sensitive films. It has been blended with natural polymers like dextran, collagen, and gelatin to obtain films with improved physical and mechanical characteristics. Polyesteramides, which are easily synthesized from vegetable seeds oil, a sustainable resource, have found application in surface coatings. These oligomeric products do not make free standing films in the ambient condition. The polyesteramides from vegetable seeds oil can be used to obtain blend with PMMA of improved mechanical and water absorption properties. In this study, linseed oil polyesteramide (LOPEA) and dehydrated castor oil polyesteramide (DCPEA), the source oils with different unsaturation in their fatty acid chains, were blended with PMAA through mixing in solution in the ratio DCPEA/LOPEA: PMAA as 80/20, 70/30, 60/40, 50/50, 40/60, 30/70, and 20/80. In the first instance, the miscibility of the two components was investigated in solution by viscosity and ultrasonic measurements and in solid phase through differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). Moisture absorption by the blend was also studied. DCPEA and LOPEA show immiscibility with PMAA in solution phase while LOPEA with more unsaturation in the fatty acid chain of the oil was found more immiscible than DCPEA. DCPEA shows a narrow miscibility window in the solid phase while LOPEA was found immiscible with PMAA in the solid phase too. Uptake of moisture was found to be markedly reduced in the blends of DCPEA/LOPEA with PMAA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1367–1374, 2007:     

Quantitative preparation of long chain thioethers from an oxo-trans-2-enoic ester and a 9,12-dioxo-trans-10-enoic acid

Branched-chain thioethers have been prepared from methyl 4-oxo-trans-2-hexadecenoate and 9,12-dioxo-trans-10-octadecenoic acid. The reagents involved in these preparations were mercaptoacetic and mercaptopropionic acids. The yields of these thioethers are almost quantitative.     

Structure and Biological Significance of Triacylglycerols Containing Cyclopropene Acyl Moieties

Cyclopropene fatty acids are constituents of seed lipids of various plants, including sources of edible fats, such as cottonseed and kapok. Physiological and toxicological properties of lipids containing cyclopropene acyl moieties are reviewed and the difficulties encountered in the elucidation of the structures of triacylglycerols containing cyclopropene acyl moieties are discussed. A novel method for the analysis of such triacylglycerols is presented.     

Wear of graphite anodes during electrolysis of add sulphate solutions

Graphite electrodes were prepared by mixing calcined coke and coal tar pitch. They were pressed under 250 kg cm^–2 and heat treated up to 2800° C. Rectangles measuring 70 mm x 40 mm x 8 mm were anodically polarized under galvanostatic and potentiostatic conditions. Electrolyses were conducted at 10–50 mA cm^–2 for periods ranging from 10–120 hours in Na₂SO₄ solutions acidified with sulphuric acid to various pH values. The wear of graphite anodes increased with decreasing bath temperature, increasing acid concentration, decreasing pH of the electrolyte and increasing current density. A model is suggested which assumes that corrosion takes place via the formation of a lamellar crystal compound with the formula (C ₈ ⁰ O)(OH)₃HSO ₄ ^– ·2H₂SO₄.The compound is unstable at higher temperatures when corrosion is effected by oxidation of graphite by atomic oxygen. The formation of the carbon ions was found to be a necessary precondition for the formation of the complex.     

Shape optimization of a micromixer with staggered herringbone groove

Shape optimization of a staggered herringbone groove micromixer using three-dimensional Navier-Stokes analysis has been carried out. The analysis of the degree of mixing is performed by the calculation of spatial data statistics. The calculation of the variance of the mass fraction at various nodes on a plane in the channel is used to quantify mixing. A numerical optimization technique is applied to optimize the shape of the grooves on a single wall of the channel. Two design variables, namely, the ratio of the groove depth to channel height ratio and the angle of the groove, are selected for optimization. A mixing index is used as the objective function. The results of the optimization show that the mixing is very sensitive to the shape of the groove which can be used in controlling the mixing in microdevices. The mixing is affected by the depth of the groove much more than the angle of the groove.     

Graft Copolymerization of Acrylamide onto Oil Palm Empty Fruit Bunch (OPEFB) Fiber

Grafting of acrylamide (AAm) onto oil palm empty fruits bunch fiber using hydrogen peroxide as initiator and methyl acrylate as comonomer was investigated. The amount of comonomer needed to make grafting of acrylamide possible was determined. The percentage of poly(acrylamide) and the comonomer in the final graft copolymer was estimated by elemental analysis. Results obtained indicated that methyl acrylate facilitated the incorporation of acrylamide monomer onto OPEFB. The reactivity ratios for both monomers were determined by using Fineman–Ross plot. The effects of reaction temperature and period as well as amount of the initiator, solvent, monomer and comonomer on the percentage of grafting at fixed amount of comonomer (11 mmol) were studied. Maximum percentage of grafting was achieved when the amount of initiator and solvent 3.98×10⁻³ mol and 50 mL respectively. The optimum reaction temperature was 50 ^○C and the reaction period was 90 min. Highest percentage of grafting was 232% when 25.6 mmol of acrylamide was used under these optimum conditions. The presence of functional group in the grafted polymer is characterized by infrared spectroscopy and the surface morphology is observed by scanning electron microscopy. Thermoanalytic investigation on OPEFB and OPEFB-g-PAAM were carried out to evaluate the thermal stability and respective activation energy of the materials.     

Metal recovery in a pilot-scale rotating cylindrical wiper-blade electrode system

The performance of an experimental pilot-scale electrochemical reactor using a rotating cylindrical electrode equipped with wiper blades is described. Data obtained from monopolar depositing and bipolar stripping—depositing of copper from dilute aqueous electrolytes are presented and certain economic aspects of metal recovery are discussed.     

UV‐radiation–induced preirradiation grafting of methyl methacrylate onto lignocellulose fiber in an aqueous medium and characterization

The preirradiation method of grafting has been established by ultraviolet radiation. Methyl methacrylate (MMA) was grafted onto jute fiber in an aqueous medium. The variation of graft weight with UV‐radiation time, monomer concentration, and reaction time was investigated. The conversion of monomer into homopolymer and graft copolymer was evaluated. The graft weight passes through a maximum value (～ 122%) with UV‐radiation time. The optimum value of the monomer concentration was evaluated for maximum degree of grafting. Graft copolymerization of MMA onto lignocellulose fiber significantly increases the elongation at break (～ 65%) compared to that of the “as‐received” sample. However, a linear decrease on breaking load was observed with the increase of graft weight. The estimation of degree of grafting was achieved using an IR technique by correlating band intensities with the degree of grafting. Considering the water‐absorption property, the grafted sample showed a maximum up to 61% decrease in hydrophilicity compared to that of the as‐received sample. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1667–1675, 2004     

Polyurethane composites based on oil palm empty fruit bunches: Effect of isocyanate/hydroxyl ratio and chemical modification of empty fruit bunches with toluene diisocyanate and hexamethylene diisocyanate on mechanical properties

This study focuses on the effect of isocyanate (NCO)/hydroxyl (OH) group ratios and chemical modification of oil palm empty fruit bunches (EFBs) with toluene diisocyanate (TDI) and hexamethylene diisocyanate (HMDI) on the mechanical properties of EFB–polyurethane (PU) composites. The tensile, flexural, and impact properties are affected by the NCO/OH ratios. The tensile strengths, flexural strengths, and toughness increase as the NCO/OH increases; however, the modulus decreases. The reduction in the modulus is attributable to the increased flexibility of the PU linkages. Chemical modification of the EFBs increases the tensile strength, flexural strength, and toughness; however, the modulus is lowered as the percentage of treated EFB is increased. Impact strength results show that the strength increases as the NCO/OH ratio is increased. At NCO/OH ratios of 1.0 and 1.1, the composites with HMDI‐treated fibers exhibit higher impact strength than those with TDI‐treated and untreated fibers, respectively. This may be due to the longer and more flexible chain length of HMDI as compared to TDI, which enables the composites to absorb more energy before failure. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007