Quantitative assessment of motion correction for high angular resolution diffusion imaging

Several methods have been proposed for motion correction of high angular resolution diffusion imaging (HARDI) data. There have been few comparisons of these methods, partly due to a lack of quantitative metrics of performance. We compare two motion correction strategies using two figures of merit: displacement introduced by the motion correction and the 95% confidence interval of the cone of uncertainty of voxels with prolate tensors. What follows is a general approach for assessing motion correction of HARDI data that may have broad application for quality assurance and optimization of postprocessing protocols. Our analysis demonstrates two important issues related to motion correction of HARDI data: (1) although neither method we tested was dramatically superior in performance, both were dramatically better than performing no motion correction, and (2) iteration of motion correction can improve the final results. Based on the results demonstrated here, iterative motion correction is strongly recommended for HARDI acquisitions.     

Transient bonds and chemical reactivity of molecules

Electron delocalization between the reagent and reactant molecules is the principal driving force of chemical reactions. It brings about the formation of new bonds and the cleavage of old bonds. By taking the aromatic substitution reaction as an example, we have shown the orbitals participating in electron delocalization. The interacting orbitals obtained are localized around the reaction sites, showing the chemical bonds that should be generated and broken transiently along the reaction path. By projecting a reference orbital function that has been chosen to specify the bond being formed on to the MOs of the reactant molecules, the reactive orbitals that are very similar to the interacting orbital have been obtained. The local potential of the reaction site for electron donation estimated for substituted benzene molecules by using these projected orbitals shows a fair correlation with the experimental scale of the electron-donating and -withdrawing strength of substituent groups. The reactivity is shown to be governed by local electronegativity and local chemical hardness and also by the localizability of interaction on the reaction site. © 1996 John Wiley & Sons, Inc.     

Cyclization reaction of polyacrylonitrile and poly(styrene-co-acrylonitrile) studied by PVT measurements

Pressure, volume, temperature (PVT) measurements reveal that during the intramolecular cyclization reaction of poly(acrylonitrile) (PAN) and poly(styrene-co-acrylonitrile) (SAN) the volume decreases. This volume contraction becomes smaller with increasing styrene content in the random copolymers and should be related to the simultaneous decrease of longer acrylonitrile homo-sequences. The onset temperature of the cyclization reaction is raised with higher styrene contents in the random copolymers. Thus, it can be excluded that the cyclization reaction has a major influence on the discoloration process of SAN samples having relatively small acrylonitrile contents (less than 50 mol-%) during thermal annealing below 300°C.     

Cu-DNAzyme facilitates highly sensitive immunoassay

A simple Cu-DNAzyme system is used for signal transduction of a CuO nanoparticle-labeled immunoassay, which makes the immunoassay fast, simple, cost-effective, and sensitive, thus promising for biomedical applications and point-of-care testing.     

Volume polarization holographic recording in thick phenanthrenequinone-doped poly(methyl methacrylate) photopolymer

Volume polarization holographic recording in phenanthrenequinone-doped poly (methyl methacrylate) photopolymer is obtained. Photoinduced birefringence in a 2 mm thick sample is measured by a phase-modulated ellipsometry. The birefringence induced in this material by linearly polarized beam at 514 nm reaches 1.2×10(-5). In addition, ability for recording volume polarization grating using two different polarization configurations is demonstrated and compared. The experimental results show that the diffraction efficiency of the hologram reaches to ～40% by using two orthogonal circularly polarized beams.     

Reinvestigation of the thermoelectric properties of Ag8GeTe6

High‐density polycrystalline samples (above 98% of the theoretical density) of Ag₈GeTe₆ were prepared by solid‐state reactions of Ag₂Te, GeTe, and Te, followed by hot‐pressing. The thermoelectric properties were measured at temperatures ranging from room temperature to around 700 K. The thermal conductivity values were extremely low (0.25 Wm^–1 K^–1 at room temperature), and consequently Ag₈GeTe₆ exhibited a relatively high thermoelectric figure of merit, ZT = 0.48 at 703 K. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Investigating the Dynamic Viscoelasticity of Single Polymer Chains using Atomic Force Microscopy

In single‐molecule force spectroscopy (SMFS), many studies have focused on the elasticity and conformation of polymer chains, but little attention has been devoted to the dynamic properties of single polymer chains. In this study, we measured the energy dissipation and elastic properties of single polystyrene (PS) chains in toluene, methanol, and N,N‐dimethylformamide using a homemade piezo‐control and data acquisition system externally coupled to a commercial atomic force microscope (AFM), which provided more accurate information regarding the dynamic properties of the PS chains. We quantitatively measured the chain length‐dependent changes in the stiffness and viscosity of a single chain using a phenomenological model consistent with the theory of viscoelasticity for polymer chains in dilute solution. The effective viscosity of a polymer chain can be determined using the Kirkwood model, which is independent of the intrinsic viscosity of the solvent and dependent on the interaction between the polymer and solvent. The results indicated that the viscosity of a single PS chain is dominated by the interaction between the polymer and solvent. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1736–1743     

Preparation of free‐standing silicone particles in aqueous heterogeneous system

To prepare cross‐linked silicone (silicone rubber) particles in an aqueous medium, we investigated two synthesis methods involving a miniemulsion system. The first method was based on cationic ring‐opening polymerization of cyclic siloxane, which is a common synthetic route for linear silicone oil and uses octamethylcyclotetrasiloxane (D₄) as the monomer and dimeric D₄ (bis‐D₄) as the cross‐linker. Although this method produces silicone particles, the particles do not remain in the particulate state after drying because of low cross‐linking density. The polymerization mechanism of this method was also investigated, which proceeds under the ring‐opening reaction of D₄ in monomer droplets and upon polycondensation of hydrolyzed D₄, which occurs in the water phase (ie, outside the monomer droplets). This mechanism implied that introducing the cross‐linking structure into particles is difficult because of the low solubility of bis‐D₄ in water. To overcome these difficulties, we demonstrated a second method of preparing silicone particles based on the thiol‐Michael addition reaction between thiol‐terminated silicone oil and triacrylate in miniemulsion systems. Transmission electron microscopy images indicated that the silicone particles obtained in the particulate state upon drying and the aggregates of these particles showed elasticity.     

Rhodium-Catalyzed ortho-Bromination of O-Phenyl Carbamates Accelerated by a Secondary Amide-Pendant Cyclopentadienyl Ligand

It has been established that a newly developed cyclopentadienyl rhodium(III) [Cp^ARh^III] complex, bearing an acidic secondary amide moiety on the Cp ring, is able to catalyze the ortho-bromination of O-phenyl carbamates with N-bromosuccinimide (NBS) at room temperature. The presence of the acidic secondary amide moiety on the Cp^A ligand accelerates the bromination by the hydrogen bond between the acidic NH group of the Cp^A ligand and the carbonyl group of NBS.