Al2O3f＋Cr／ZL109混杂复合材料的复合振动钻削加工

用挤压铸造法制备了三氧化二铝短纤维和碳短纤维混杂增强ZL109合金复合材料、并采用永磁复合激振方式进行了轴向与扭转复合振动钻削加工，研究了该材料的钻削加工性及振幅和振动频率对钻削力、钻头磨损和孔精度的影响。结果表明。采用这种复合振动钻削方式．可更明显降低钻削力和提高加工精度。选择合理的振动参数。也可以减轻刀具磨损，因而可改善Al2I3f Cf／ZL109混杂复合材料的钻削加工性。     

A new family of heparin-binding growth/differentiation factors: increased midkine expression in Wilms' tumor and other human carcinomas

Midkine (MK) and heparin-binding growth-associated molecule/pleiotrophin form a new family of heparin-binding growth/differentiation factors. We studied MK gene expression in human tumors. In normal human reference tissues, MK was highly expressed in the mucosal tissue of the small intestine, moderately in the thyroid, weakly in the tissues of the lung, colon, stomach, kidney, and spleen, and not at all in the liver. All of 6 surgically removed specimens of Wilms' tumor highly expressed MK. Also, a moderate to intense level of MK expression was noted in the majority of surgically removed hepatocellular carcinomas. The MK mRNA level was analyzed in a number of cultured and nude mice-transplanted lines of human tumors. In stomach, colon, pancreatic, lung, and esophageal carcinomas, a moderate to high level of MK expression was found in the majority of them. These results suggest an important role of MK in the development and/or biological behavior of tumors and raised a possibility to use MK as a diagnostic marker. Heparin-binding growth associated molecule/pleiotrophin mRNA was low or scarcely detectable in samples analyzed thus far except for significant levels of the expression that were observed in PA-1 teratocarcinoma cells and in some surgical specimens of Wilms' tumor.     

Anode‐voltage‐control circuit for compensation of luminance deterioration

Abstract— An external driving circuit that has realized long lifetime, power‐consumption control, and peak luminance for organic light‐emitting diode (OLED) displays have been developed. This circuit realizes an effective method for constant‐anode‐voltage (CV) driving refered to as clamped inverter (CI) driving. The feature of CV driving is to achieve low‐power consumption compared with constant‐anode‐current (CC) driving and to control the power consumption and peak luminance according to the image because display luminance can be easily changed by controlling the anode voltage. On the other hand, CV driving has the problem that luminance deterioration appears to be serious compared with that of CC driving because the current of the OLED element decreases according to usage time. To cope with this, a lifetime compensation circuit that has increased the anode voltage so that it compensates for the luminance deterioration has been developed. This circuit can compensate not only the decrease in current but also the decrease in luminance at a constant current that CC driving cannot. However, increasing the anode voltage causes an increase in stress on the OLED element. The influence of stress on OLED lifetime was verified. As a result, it was confirmed that this circuit can extend the lifetime by 32% even if the anode voltage is increased, causing stress on the OLED structure.     

Nonlinear effects on spin waves in3He-4He dilute solutions

Spin dynamics of³He-⁴He dilute solution have been studied in the collisionless regime by NMR methods. In cw NMR experiments, we observed spin waves in a magnetic field gradient. The frequency difference between the first mode and the others obeyed a two-thirds power law in the strength of the field gradient. By using a pulsed NMR method, nonlinear spin dynamics were studied. We observed the large amplitude spin waves after an rf pulse. The frequency of each spin-wave mode depended on the tipping angle. By using the parameter determined in the present experiment, the numerical calculated results based on Leggett-Rice theory are in good agreement with the results of the pulsed NMR experiments.     

Shorter-wavelength lithography utilizing MRS-type negative resists

New negative photoresists, called MRS-type resists, are successfully applied to deep-UV 1:1 projection printing and 365 nm 10:1 reduction projection printing. The MRS-type resists are characterized by intense absorption of exposure light and absence of swelling in aqueous developer solutions. They resolve steep profile submicron images in a 1.0 μ thick film. They are not adversely affected by reflected light from water surfaces. In order to use MRS-type resists with broader development latitude, optimizing the extent of light absorption is important because the resist profiles strongly depend on development conditions due to increasing solubility towards the resist bottom.     

Effect of oxygen on the wettability of sapphire by liquid palladium

The surface tension of liquid palladium and the contact angle between liquid palladium and sapphire have been measured at 1833 K as a function of oxygen pressure by the sessile drop method. Oxygen acted as a surface-active element on the surface of liquid palladium and at the interface between liquid palladium and sapphire, resulting in the decrease of the surface tension and the contact angle. The work of adhesion calculated from their values increased with increasing oxygen pressure, and had a constant value above 400 Pa. The maximum excess concentration of oxygen was estimated to be 7.3×10^–6 mol m^–2 for the surface and 6.9×10^–6 mol m^–2 for the interface.     

Design of a memory‐based prefilter supplementing a robust PID control system

For systems with uncertainties, lots of PID parameter tuning methods have been proposed from the view point of the robust stability theory. However, the control performance becomes conservative using robust PID controllers. In this paper, a new two‐degree‐of‐freedom (2DOF) controller, which can improve the tracking properties, is proposed for nonlinear systems. According to the proposed method, the prefilter is designed as the PD compensator whose control parameters are tuned by the idea of a memory‐based modeling (MBM) method. Since the MBM method is a type of local modeling methods for nonlinear systems, PD parameters can be tuned adequately in an online manner corresponding to nonlinear properties. Finally, the effectiveness of the newly proposed control scheme is numerically evaluated on a simulation example. Copyright © 2008 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

An application of rapid freezing,freeze substitution–fixation for scanning electron microscopy

A combined technique of the rapid freezing, freeze substitution–fixation method and the osmium–DMSO-osmium method was devised. By this combined method we clearly observed the architecture of intracellular components in three dimensions. Morphological characteristics were generally similar to those of tissue prepared by the osmium–DMSO-osmium method but different in some respects. Mucigen droplets in intestinal goblet cells, for example, appeared as separated spheres, while in specimens prepared by chemical fixation they were observed as a mass of fused droplets. In the Golgi complex, all cisternae were extremely flat, although they usually dilated on the cis side after chemical fixation. Particles on the mitochondrial tubules of liver cells were well distinguished. They were mushroom shaped, as are those observed by negative staining. The combined method, that is, the rapid freezing, osmium–DMSO-osmium method, is thought to be effective for studying the true structure of intracellular components by scanning electron microscopy.     

Cu-NMR study on high-T c cuprate La1.89Ca1.11Cu2O6+δ (La2126)

Cu-NMR spectra and the nuclear spin-lattice relaxation rate T ₁ ^-1 have been studied intensively on the bilayer type high-T_c cuprate La_1.89Ca_1.11Cu₂O₆₊ (La2126). The resonance line shift showed a monotonic decrease with lowering temperature in the normal state, indicating that this compound belongs to the lightly-doped region. The Curie-Weiss temperature dependence of (T₁T)^–1 in the normal state shows that the pseudo spin-gap does not always exist in the light-doped bilayer systems.