Breaking a remote user authentication scheme for multi-server architecture

Lin et al., (2003) proposed a remote user authentication scheme for multi-server architecture. In this paper, we breaks this scheme by giving an attack. Our attack allows an adversary to impersonate any user in the system, as long as a single authentication message of that user is observed.     

EBSP study of the annealing behavior of aluminum deformed by equal channel angular processing

Commercial purity aluminum (99.5%) was fabricated by equal channel angular pressing (ECAP) up to total accumulated strains of approx. 10. The annealing behavior of material deformed to total strains of approx. 1 and 10 was investigated, using heat treatments of 2 h at various temperatures from 100 to 500 °C. The microstructure of the annealed materials was characterized using the electron back-scatter pattern technique. A number of parameters were determined including the distribution and average values of both the boundary spacings and misorientations. For samples deformed to a total strain of 1, annealing resulted in discontinuous recrystallization. For samples deformed to a total strain of 10, annealing resulted in microstructures exhibiting characteristics of both uniform coarsening and, in a number of places, of discontinuous recrystallization. An attempt was made, based on the boundary spacing distributions, to separate these two components. The grain size after annealing was still however small, being just 6.4 μm after 2 h at 300 °C.     

复合固体超强酸SO42-/Fe2O3-γ-Al2O3催化合成丁酸丁酯

采用沉淀硫酸化法制备了复合固体超强酸催化剂SO2-4/Fe2O3-γ-Al2O3,确定了其最佳制备工艺条件:硫酸浸渍浓度为0.6 mol/L,浸渍时间4 h;焙烧温度550℃,焙烧时间3 h.并采用该催化剂合成丁酸丁酯,考察了物料配比、催化剂用量和反应时间对酯化反应的影响,确定了丁酸丁酯的最佳合成条件:丁醇与丁酸摩尔比为1.4:1,催化剂用量0.9%(以反应物质量计),回流条件下反应3.0 h,在此最佳合成条件下,酯化率可达95.6%.     

Application of an anisotropic perfectly matched layer absorber for open boundary truncation in the multiresolution time domain scheme

We apply an anisotropic perfectly matched layer (APML) absorber for open boundary truncation in implementation of the multiresolution time domain (MRTD) scheme. We develop an APML update algorithm to handle a general APML region in the MRTD formulations with the content of the leapfrog algorithm applied in the conventional finite-difference time-domain method. We also discuss the boundary truncations for both perfectly electric conductor (PEC) and perfectly magnetic conductor (PMC) walls using the image techniques. We validate the algorithm by analyzing various guided wave and antenna structures. It is found that the APML performs well for absorbing electromagnetic waves in the MRTD algorithm.     

RFID电子门票解决方案(三)

继第二、三期的专题连载(一)和(二)之后,这次介绍门票系统的扩展和系统的优势,并且给出了各种门票的对比表。     

移动通信系统"单通"故障浅析

重点分析了移动通信系统中,无线及交换系统内语音单通故障的成因；并以朗讯 CDMA 交换系统为例,提出语音系统优化建议；最后结合运维工作,阐述单通故障的处理流程与几种有效处理思路及工具。     

基于素性检验思想的不可约多项式判断

论文将Fermat素性检验的思想运用于不可约多项式的判断,给出了一个对于不可约判断问题的Monte Carlo 算法,分析了该算法的计算复杂度问题,并且给出了次数在200以内的检验结果。     

基于C6711处理器cdma2000 1X系统前向信道信号的处理

在cdma20001x前向信道中,要对一段信号进行传送,一般选用QPSK调制,因为QPSK调制比QAM更适合噪音环境。采用TI6000系列的TMS320C6711芯片处理前向信道信号,可以对复杂性和实时性较高的信号做采集、量化、编码、调制等实时处理,主要功能通过软件编程实现,从而使系统具有结构灵活、可靠性高、可扩展等优点。     

Acquisition and pattern recognition of spectrum information of welding metal transfer

With the creation of a pattern recognition system for metal transfer mode, this article has collected five kinds of spectrum signals in gas metal arc welding (MIG, MAG and CO₂) and take them as training samples. These samples have been pretreated by computer, several key characteristic parameters of the spectrum signal have been creatively extracted, and a corresponding recognition function and a minimum-distance-classifier have been constructed. The results show that the pattern recognition of several kinds of metal transfer modes for the metal gas arc welding can be done successfully, and relative important parameters in welding process, such as the frequency of droplet transfer and the approximate diameter of each droplet, can also be obtained.