Particle swarm optimization algorithm driven by multichaotic number generator

In this paper, the utilization of different chaotic systems as pseudo-random number generators (PRNGs) for velocity calculation in the PSO algorithm are proposed. Two chaos-based PRNGs are used alternately within one run of the PSO algorithm and dynamically switched over when a certain criterion is met. By using this unique technique, it is possible to improve the performance of PSO algorithm as it is demonstrated on different benchmark functions.     

The good,the bad and the ugly – three approaches to management of human waste in a high-mountain environment

Each year, millions of mountaineers visit high-mountain areas. They generate tonnes of faeces and cubic hectometres of urine annually. Thus, proper disposal of human waste is important for the conservation and appropriate management of high-mountain areas. The management can address the issue in three ways: the good (complete/non-invasive); the bad (partial/superficial); and the ugly (invasive). With use of those categories, 20 selected summits from different parts of the world have been evaluated, separately in respect to faeces and urine. It was expected that correct or incorrect disposal of human waste would depend on the changing altitude and/or development level. Disappointingly, the correlation between selection criteria (better or worse solution) and the increase of altitude does not exist. Similarly, the increase of the development level does not play a significant role, especially when urine is taken under consideration. The problem is more global than was thought. The paper makes recommendations which could lead to reduction of this problem.     

Enhanced analytical method for IP mobility handover schemes cost evaluation

Seamless service delivery for mobile users complemented with Quality of Service provisioning for their real-time applications have a hot topic in the field of mobile communication in recent years. Seamless mobility goes hand in hand with Mobile IPv6 protocol. Since many different handover schemes trying to solve the Quality of Service issues have been developed a need for means for comparison has arisen. This paper presents an enhanced universal analytical method for comparison of handover schemes. The method focuses on two important aspects influencing the handover performance—binding update cost and packet delivery cost. The use of the proposed method is presented for comparison of four most common handover schemes—MIPv6, HMIPv6, FMIPv6 and F-HMIPv6.     

Hsp100 Molecular Chaperone ClpB and Its Role in Virulence of Bacterial Pathogens

This review focuses on the molecular chaperone ClpB that belongs to the Hsp100/Clp subfamily of the AAA+ ATPases and its biological function in selected bacterial pathogens, causing a variety of human infectious diseases, including zoonoses. It has been established that ClpB disaggregates and reactivates aggregated cellular proteins. It has been postulated that ClpB’s protein disaggregation activity supports the survival of pathogenic bacteria under host-induced stresses (e.g., high temperature and oxidative stress), which allows them to rapidly adapt to the human host and establish infection. Interestingly, ClpB may also perform other functions in pathogenic bacteria, which are required for their virulence. Since ClpB is not found in human cells, this chaperone emerges as an attractive target for novel antimicrobial therapies in combating bacterial infections.     

Novel inorganic precursors [Co4.32Zn1.68(HCO2)18(C2H8N)6]/SiO2 and Co4.32Zn1.68(HCO2)18(C2H8N)6]/Al2O3 for Fischer–Tropsch synthesis

The silica- and alumina-supported Co–Zn catalysts were synthesized by thermal decomposition of new inorganic precursors [Co_4.32Zn_1.68(HCO₂)₁₈(C₂H₈N)₆]/SiO₂ or Al₂O₃. A novel coordination polymer formulated as [Co_4.32Zn_1.68(HCO₂)₁₈(C₂H₈N)₆] (1) was prepared using the solvothermal technique and characterized by elemental analysis, FT-infrared spectroscopy. Thermal stability of the complex 1 was investigated by thermogravimetric analysis and differential scanning calorimetry, and its structure was determined by single-crystal X-ray diffraction. Characterization of catalysts was carried out using powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and BET specific surface area. The catalysts were evaluated for Fischer–Tropsch synthesis (FTS) in the temperature range 200–300 °C. The results revealed that the synthesized catalysts have higher selectivity to the desired products at 260 °C. The performance of the catalysts was compared to those of catalysts constructed via impregnation method and the fabricated catalysts show higher activity and selectivity than the reference catalysts.     

Synthesis of trimethylene carbonate/ϵ‐caprolactone copolymers initiated with zinc alkoxide: influence of copolymer chain microstructure on thermal and mechanical properties

Ethylzinc(II ) ethoxide is a highly active and efficient initiator for the bulk polymerization of 1,3‐trimethylene carbonate and its copolymerization with ? ‐caprolactone. This initiator allows one to obtain (co)polymers with high molar masses in quite a short time. Significant difference in co‐monomer reactivity and relatively low participation of intermolecular transesterification processes lead to the obtained copolymers being characterized by a gradient chain microstructure. In ¹³C NMR spectra, in all regions, we observed the presence of triads which were distinctly represented by four peaks for the carbonyl signal. Mechanical tests showed that copolymers containing 70% and more of ? ‐caprolactone presented a relatively high Young's modulus and a very high maximum elongation factor; therefore these materials are promising in many biomedical applications. Due to the high reaction rate, we also made an attempt at copolymerization using reactive extrusion which gave promising results. © 2017 Society of Chemical Industry     

The pin power distribution in theVVER-1000 mock-up on the LR-0 research reactor

The pin power density distribution in reactor is an important quantity, necessary for the adequate assessment of fuel conditions and of core structures and pressure vessel radiation embrittlement as well.The paper shows the detailed comparison of calculated and experimentally determined pin by pin power distribution. To verify the reliability of measured data used for comparison with calculated data, the symmetrically located pins were measured. The calculations have been done with deterministic and Monte Carlo approach. The effect of different data libraries used for calculations are discussed as well.     

Insulating and Other Physical Properties of CoO‐Doped Zinc Oxyfluoride‐Borate Glass‐Ceramics

Zinc oxy fluoro borate glasses mixed with different concentrations of CoO (ranging from 0 to 2.0 mol%) are synthesized and subsequently crystallized. The scanning electron microscopy pictures have exhibited crystallinity. Differential scanning calorimetric studies have indicated that the prepared samples consist of multiple crystal phases. The X‐ray diffraction patterns have indicated that the glass‐ceramic samples are composed of αZn(BO₂)_2, (Zn)₃(BO₃)_2, CoF₂, CoF₃, Co₃FB₇O₁₃, ZnCo₂O₄, Co₃O₄ crystalline phases. The optical absorption and photoluminescence studies have indicated that there is a gradual increase of tetrahedral cobalt ion concentration with increase of CoO concentration in the glass network. IR spectroscopic studies have pointed out increased degree of polymerization of the zinc oxy fluoro borate glass network with increase of CoO content. The analysis of results of dielectric properties indicated increase of insulating strength of the glass‐ceramics with increase of CoO content. Finally, the dielectric breakdown strength of the samples is measured at room temperature in air medium and it is found to increase from 12.9 to 19.2 kV/cm with increase of CoO from 0.2 to 2.0 mol%. The reasons for such increase of breakdown strength are discussed quantitatively in terms of dielectric parameters with aid of data on spectroscopic properties.     

The effect of polyethylene crystallinity and polarity on thermal stability and controlled release of essential oils in antimicrobial films

Antimicrobial packaging can preserve and increase shelf life of free preservatives food products. Active materials present in the packaging material can migrate, in a controlled manner, to the food surface, avoiding bacterial and fungal proliferation and keeping the food product edible for longer periods of time. Essential oils (EO) are natural antimicrobial agents that can be released to the headspace with no direct contact between the package and the food. To minimize loses of EO during high heat melt processing, a three stages process was implemented and tested. Antimicrobial films were prepared by melt mixing a variety of polyethylene copolymers in the presence of organo‐modified montmorillonite nano clay (NC) and thymol, an EO present in oregano and thyme. A controlled EO desorption from films can be achieved by changing the polymer crystallinity and polarity. As the crystallinity increased, the thermal stability of the EO during the extrusion process improved. The addition of NC affects the structure and homogeneity of the crystals. The combination of high polymer crystallinity and chemical affinity between EO and NC increased the thermal stability of the EO during film processing, enabling to control the desorption rate. The effect of multilayer structure based on varied densities and polarities was also studied. Increasing the polarity of the outer layers in multilayered film reduced the EO desorption rate as a result of chemical interactions between the polymer and the EO. The final antimicrobial activity of the films was also found to be dependent on the EO partitioning. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40309.