Solvent extraction and stripping of silver ions in room-temperature ionic liquids containing calixarenes

We found that a calix[4]arene-bearing pyridine is soluble in a typical room-temperature ionic liquid (RTIL), 1-alkyl-3-methylimidazolium hexafluorophosphate. Pyridinocalix[4]arene showed a high extraction ability and selectivity for silver ions. The extraction performance of the calix[4]arene was greatly enhanced by dissolution in RTILs compared to in chloroform. In a competitive extraction test using five different metal ions (Ag+, Cu2+, Zn2+, Co2+, Ni2+), only silver ions were transferred by the calix[4]arene from the aqueous feed phase into the RTILs, through a cation-exchange mechanism. The pyridinocalix[4]arene was found to form a stable 1:1 complex with silver ions, both by slope analysis and by Job's method. Since it is easy to strip silver ions from RTILs by controlling the aqueous-phase pH, the extraction performance of calix[4]arene in RTILs was maintained after five repeated uses.     

Hybrid surrogate-model-based multi-fidelity efficient global optimization applied to helicopter blade design

A multi-fidelity optimization technique by an efficient global optimization process using a hybrid surrogate model is investigated for solving real-world design problems. The model constructs the local deviation using the kriging method and the global model using a radial basis function. The expected improvement is computed to decide additional samples that can improve the model. The approach was first investigated by solving mathematical test problems. The results were compared with optimization results from an ordinary kriging method and a co-kriging method, and the proposed method produced the best solution. The proposed method was also applied to aerodynamic design optimization of helicopter blades to obtain the maximum blade efficiency. The optimal shape obtained by the proposed method achieved performance almost equivalent to that obtained using the high-fidelity, evaluation-based single-fidelity optimization. Comparing all three methods, the proposed method required the lowest total number of high-fidelity evaluation runs to obtain a converged solution.     

Electrical and Thermal Conductivity and Conduction Mechanism of Ge<Subscript>2</Subscript>Sb<Subscript>2</Subscript>Te<Subscript>5</Subscript> Alloy

Ge₂Sb₂Te₅ alloy has drawn much attention due to its application in phase-change random-access memory and potential as a thermoelectric material. Electrical and thermal conductivity are important material properties in both applications. The aim of this work is to investigate the temperature dependence of the electrical and thermal conductivity of Ge₂Sb₂Te₅ alloy and discuss the thermal conduction mechanism. The electrical resistivity and thermal conductivity of Ge₂Sb₂Te₅ alloy were measured from room temperature to 823 K by four-terminal and hot-strip method, respectively. With increasing temperature, the electrical resistivity increased while the thermal conductivity first decreased up to about 600 K then increased. The electronic component of the thermal conductivity was calculated from the Wiedemann–Franz law using the resistivity results. At room temperature, Ge₂Sb₂Te₅ alloy has large electronic thermal conductivity and low lattice thermal conductivity. Bipolar diffusion contributes more to the thermal conductivity with increasing temperature. The special crystallographic structure of Ge₂Sb₂Te₅ alloy accounts for the thermal conduction mechanism.     

Soft magnetic properties of NiFeTa thin films for biasing film applications in magnetoresistive elements

The effects of Ta addition on the magnetic properties of permalloy thin films have been investigated. The alloy compositions on a weight basis are (Ni₈₁Fe₁₉)_1-x Ta _x with 0 x 0.105, and the films are sputtered onto a glass substrate at between room temperature and 300 C. The saturation magnetization and anisotropic magnetic field decrease with increasing Ta content. The saturation magnetization is 0.75 T at 5 wt % Ta. The coercivity remains constant at 125 Am^-1. The electrical resistivity increases linearly with increasing Ta content, then saturates at approximately 7.5 wt% Ta. The saturation resistivity is approximately 1.00 m. The magnetoresistivity ratio (/) decreases with increasing Ta content, mainly due to increased electrical resistivity (). The magnetostriction changes from negative to positive with increasing Ta content and reaches nearly zero at 2 wt% Ta. The NiFeTa films containing 5–6 wt% Ta have potential for use as the soft-biasing film in magnetoresistive elements.     

Effect of gamma radiolysis on pit initiation of zircaloy-2 in water containing sea salt

In spent fuel pools at the Fukushima Daiichi Nuclear Power Station (1F), seawater was injected for cooling purposes after the tsunami disaster in March 2011. It is well known that the chloride in the seawater has the potential to cause localized corrosion (e.g., pitting corrosion) in metals. In this study, we evaluated the pitting potentials of zircaloy-2, the material used in the fuel cladding tubes in 1F, as a function of chloride concentration. To accomplish this, we used artificial seawater under gamma-ray irradiation and investigated the effect of radiolysis on pit initiation of zircaloy-2 in water containing sea salt. Changes in the composition of water containing sea salt were analyzed as well, both before and after gamma-ray irradiation. The characteristics of the resultant oxide films formed on zircaloy-2 were evaluated by X-ray photoelectron spectroscopy and electrochemical impedance spectroscopy. The experimental results showed that the pitting potential under irradiation was slightly higher than that under conditions in which no radiation was present, and that the pitting potential decreased with increasing chloride concentration in the presence as well as the absence of radiation. Solution analyses for water containing sea salt showed that hydrogen peroxide was generated by irradiation. The oxide film was composed of zirconium oxide and was made thicker during the irradiation. The higher pitting potential could thus be explained by the capacity of hydrogen peroxide to oxidize the surface and enhance oxide film formation. Under gamma-ray irradiation, the zircaloy-2 surface with an oxide film formed by radiolysis products was found to be resistant to pitting in the presence of chloride.     

Capacitance-voltage and leakage-current characteristics of sol-gel-derived crystalline and amorphous SrTa2O6 thin films

SrTa₂O₆ (STA) is a promising high-dielectric-constant (ε) material. In this study, STA thin films were fabricated using the sol-gel method. The capacitance-voltage and leakage-current characteristics of crystalline and amorphous STA thin-film capacitors were investigated. STA thin films crystallized at an annealing temperature of 800 °C. Crystalline STA thin films exhibited a high ε of about 110, whereas amorphous STA thin films showed a much lower ε of about 26-41. However, amorphous STA thin films had a much more constant capacitance as a function of voltage. Of the amorphous thin films, the one annealed at 700 °C had the highest ε of about 41, the lowest leakage current of 10^− 8 A/cm², and a very constant capacitance as a function of voltage with a quadratic voltage-capacitance coefficient (α) of 27 ppm/V². The crystalline STA thin film had a negative α that was independent of frequency, which suggests that dipolar relaxation occurs and is responsible for the large change in the capacitance. The amorphous thin films had a positive α that decreased with increasing frequency, which implies that electrode polarization occurs.     

Nanofork for single cells adhesion measurement via ESEM-nanomanipulator system

In this paper, single cells adhesion force was measured using a nanofork. The nanofork was used to pick up a single cell on a line array substrate inside an environmental scanning electron microscope (ESEM). The line array substrate was used to provide small gaps between the single cells and the substrate. Therefore, the nanofork could be inserted through these gaps in order to successfully pick up a single cell. Adhesion force was measured during the cell pick-up process from the deflection of the cantilever beam. The nanofork was fabricated using focused ion beam (FIB) etching process while the line array substrate was fabricated using nanoimprinting technology. As to investigate the effect of contact area on the strength of the adhesion force, two sizes of gap distance of line array substrate were used, i.e., 1 μm and 2 μm. Results showed that cells attached on the 1 μm gap line array substrate required more force to be released as compared to the cells attached on the 1 μm gap line array substrate.     

Lead recovery from PbZrO3 using wet ball-mill technique and hydrothermal synthesis of alpha-zirconium phosphate from wastewater for resource recovery

Lead recovery from lead zirconate (PbZrO(3)) ceramics was investigated using a wet ball-mill treatment in H(2)SO(4) aqueous solution. Subsequently crystalline alpha-zirconium phosphate (alpha-Zr(HPO(4))(2).H(2)O) was synthesized using a hydrothermal technique in order for the resource recovery of zirconium in the wastewater after the wet ball-mill treatment. A wet ball-mill treatment in 4.5M H(2)SO(4) aqueous solution for 24h was capable of converting more than 99.9% of the Pb initially included in the PbZrO(3) to solid state PbSO(4) with a purity of 98%. On the other hand, the Zr in the PbZrO(3) was dissolved into the acidic solution during the treatment. The Pb and Zr metal elements coexisting in PbZrO(3) were successfully separated by the wet ball-mill technique. Then, resource recovery of zirconium in the wastewater was examined. Crystalline alpha-Zr(HPO(4))(2).H(2)O was synthesized by hydrothermal treatments in 3.1-12.5M H(3)PO(4) aqueous solutions at temperatures of 120-240 degrees C for a duration of 70h. The hydrothermally prepared powders were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM), and then they were also evaluated in terms of cation exchange capacity (CEC) measurement and thermogravimetric (TG) analysis.     

Experimental study of perforation and cracking of water-filled aluminum tubes impacted by steel spheres

Water-filled aluminum tubes were subjected to impact by six steel spherical projectiles of different diameters at impact velocities of 40–200 m/s. The effects of the diameter of the steel projectiles and of the material properties of the tubes on cracking and perforation were discussed. Water decreased the wall strength of the aluminum alloy tubes, and the impact velocity at which a steel projectile first passes through the tube wall decreased with increasing diameter of the steel projectile. Using the velocity at which the steel projectile perforates the tube wall, empirical equations of the energies required to perforate the tube wall were derived. Also, the energy balance in the steel projectile during a collision is discussed referring to the pressure history in the filled water and the velocities of the steel projectile before and after collision.