Crystal structures and phase transformation of deuterated lithium imide, Li2ND

Half-Heusler compounds of Sn-doped TiCoSb “TiCoSn_xSb_1−x (x = 0.0, 0.01, and 0.05)” were prepared and their thermoelectric properties were measured above room temperature. From the EDX analysis, all the samples have three phases: the TiCoSn_xSb_1−x, Co-rich, and Ti-rich phases. The values of the thermoelectric power increase with Sn doping, and a positive thermoelectric power is obtained in the sample of TiCoSn_0.05Sb_0.95. The thermal conductivity decreases both with increasing temperature and with Sn content. The maximum value of ZT for p-type material is 0.030 at 988 K in the sample of TiCoSn_0.05Sb_0.95.     

Scalable digital hardware for a trapped ion quantum computer

Quantum Information Processing - Many of the challenges of scaling quantum computer hardware lie at the interface between the qubits and the classical control signals used to manipulate them....     

Validation of GOES and MODIS active fire detection products using ASTER and ETM+ data

In this study we implemented a comprehensive analysis to validate the MODIS and GOES satellite active fire detection products (MOD14 and WFABBA, respectively) and characterize their major sources of omission and commission errors which have important implications for a large community of fire data users. Our analyses were primarily based on the use of 30 m resolution ASTER and ETM+ imagery as our validation data. We found that at the 50% true positive detection probability mark, WFABBA requires four times more active fire area than is necessary for MOD14 to achieve the same probability of detection, despite the 16× factor separating the nominal spatial resolutions of the two products. Approximately 75% and 95% of all fires sampled were omitted by the MOD14 and WFABBA instantaneous products, respectively; whereas an omission error of 38% was obtained for WFABBA when considering the 30-minute interval of the GOES data. Commission errors for MOD14 and WFABBA were found to be similar and highly dependent on the vegetation conditions of the areas imaged, with the larger commission errors (approximately 35%) estimated over regions of active deforestation. Nonetheless, the vast majority (> 80%) of the commission errors were indeed associated with recent burning activity where scars could be visually confirmed in the higher resolution data. Differences in thermal dynamics of vegetated and non-vegetated areas were found to produce a reduction of approximately 50% in the commission errors estimated towards the hours of maximum fire activity (i.e., early-afternoon hours) which coincided with the MODIS/Aqua overpass. Lastly, we demonstrate the potential use of temporal metrics applied to the mid-infrared bands of MODIS and GOES data to reduce the commission errors found with the validation analyses.     

Optimization of clamped circular piezoelectric composite actuators

This paper addresses the design of clamped circular piezoceramic composite unimorph and bimorph configurations, specifically the conflicting requirements of maximum volume displacement for a prescribed bandwidth. An optimization problem is formulated that implements analytical solutions for unimorph and bimorph configurations using laminated plate theory, including the use of oppositely polarized piezoceramic patches. A range of actuator geometric parameters are studied, and bounds for volume displacement and natural frequency of optimal designs are determined and presented via design curves. In the selected design space, Pareto optimization results for unimorph and bimorph configurations show that optimal volume displacement is related to the bandwidth by a universal power law such that the product of the square of the natural frequency and the displaced volume, a “gain-bandwidth” product, is a constant. Characteristic trends are also described that are independent of the actuator radius for the Pareto optimal piezoceramic patch thickness and radius versus normalized bandwidth. The results are relevant, for example, in the design of zero-net mass-flux or synthetic jet actuators used in flow control applications.     

Magnetic quadrupole doublet focusing system for high energy ions

A high energy focused ion beam microprobe using a doublet arrangement of short magnetic quadrupole lenses was used to focus 1-3 MeV protons to spot sizes of 1x1 microm2 and 1-4.5 MeV carbon and silicon ion beams to spot sizes of 1.5x1.5 microm2. The results presented clearly demonstrate that this simple doublet configuration can provide high energy microbeams for microanalysis and microfabrication applications.     

Generalization of the ordinary state-based peridynamic model for isotropic linear viscoelasticity

This paper presents a generalization of the original ordinary state-based peridynamic model for isotropic linear viscoelasticity. The viscoelastic material response is represented using the thermodynamically acceptable Prony series approach. It can feature as many Prony terms as required and accounts for viscoelastic spherical and deviatoric components. The model was derived from an equivalence between peridynamic viscoelastic parameters and those appearing in classical continuum mechanics, by equating the free energy densities expressed in both frameworks. The model was simplified to a uni-dimensional expression and implemented to simulate a creep-recovery test. This implementation was finally validated by comparing peridynamic predictions to those predicted from classical continuum mechanics. An exact correspondence between peridynamics and the classical continuum approach was shown when the peridynamic horizon becomes small, meaning peridynamics tends toward classical continuum mechanics. This work provides a clear and direct means to researchers dealing with viscoelastic phenomena to tackle their problem within the peridynamic framework.     

A particle‐based moving interface method (PMIM) for modeling the large deformation of boundaries in soft matter systems

The mechanics of the interaction between a fluid and a soft interface undergoing large deformations appear in many places, such as in biological systems or industrial processes. We present an Eulerian approach that describes the mechanics of an interface and its interactions with a surrounding fluid via the so‐called Navier boundary condition. The interface is modeled as a curvilinear surface with arbitrary mechanical properties across which discontinuities in pressure and tangential fluid velocity can be accounted for using a modified version of the extended finite element method. The coupling between the interface and the fluid is enforced through the use of Lagrange multipliers. The tracking and evolution of the interface are then handled in a Lagrangian step with the grid‐based particle method. We show that this method is ideal to describe large membrane deformations and Navier boundary conditions on the interface with velocity/pressure discontinuities. The validity of the model is assessed by evaluating the numerical convergence for a axisymmetrical flow past a spherical capsule with various surface properties. We show the effect of slip length on the shear flow past a two‐dimensional capsule and simulate the compression of an elastic membrane lying on a viscous fluid substrate. Copyright © 2015 John Wiley & Sons, Ltd.     

Improving content visibility for high‐ambient‐illumination viewable display and energy‐saving display

Abstract— Nowadays, low‐contrast viewing of LC displays (LCDs) occurs very often, which includes the viewing of mobile LCDs at high ambient illumination and the viewing of LCDs at low‐power mode. These cases result in low‐content visibility and low contrast, leading to an unpleasant viewing experience. In this paper, a technique to improve the perceived contrast and visibility of images at low‐contrast viewing conditions is proposed. The proposed approach enhances image brightness with content and ambient adaptive image brightening and highlights visual parts and boundaries with non‐photorealistic rendering. The proposed technique enables longer battery life for mobile LC devices and makes mobile LC devices viewable at high ambient illumination. It also enables TVs with extreme low‐power consumption and smart‐grid responsive TVs.     

Path Flow and Trip Matrix Estimation Using Link Flow Density

A macroscopic model is presented that simultaneously estimates route flows and trip matrices for congested road networks using data on link densities instead of link flows. The advantage of this approach is that it avoids errors that may occur in the individual links’ flow-cost relationships when congestion is heavy. Under the proposed methodology, both the flows and the matrices are estimated by the model using an image of the network such as an aerial photograph in which the number of vehicles on each link can be identified. The model itself is formulated as a maximum entropy optimization problem subject to linear constraints given by vehicle densities on the links, and is validated using analytic examples and traffic microsimulations. The results demonstrate the superiority of the link-density approach over the traditional flow-based method.