Drying of Sewage Sludge During Composting in an Updraft Dryer with the Concept of Using Self-Energy Generated Within the System

An innovative technology for sewage treatment systems is proposed. A mixture of sewage sludge and char particle is subjected to drying in the progress of composting in an updraft column. Exothermic heat generated during composting is utilized for energy of sludge drying. The char particle in the mixture contributes to enhancement of composting and drying rate. This study presents drying and composting behaviors of sludge to examine the effect of char addition. A fundamental drying experiment was carried out by hot-air heating of the sample in a small vessel. The drying characteristic curve for a mixture of sludge and char was greater than the sample of only sludge over a whole period if the drying rates were compared with the same moisture content. The drying behavior could be analyzed with a reasonable agreement by the water front receding model. The enhancement effect of drying and composting of sludge by char addition was confirmed by examination using a pilot scale of the updraft column whose volume was 50 m³. Sludge with 400% dry base (80% wet base) in moisture content could be dried successfully to lower moisture content than 67% dry base (40% wet base) only by exothermic heat during composting without supplying any auxiliary energy from the outside, and the treatment time was reduced by mixing char in sludge. The behavior was analyzed with a satisfactory agreement by a theoretical model employing moisture diffusion parameters determined from the drying characteristic curve.     

Hole Doping Mechanism in Bismuth Cuprates

The role of oxygen for the hole doping has been investigated for single-phased (Bi,Pb)₂Sr₂Ca₂Cu₃O. _z Defects introduced by oxygen have been clarified to be interstitial atoms by pycnometric density measurements. The c axis decreases and the modulation periods along the b axis also decrease with increasing oxygen content in the crystal. It is likely that extra oxygen ions exist between the BiO double layers and those oxygen ions are responsible for the modulation. Samples with oxygen content ranging from 9.99 to 10.18 showed superconductivity. The critical temperature T _c , exhibited a maximum value (109 K) at 10.07 oxygen atoms in the formula unit, which coincided with the average Cu valence of 2.13. The data indicated that hole formation was governed by oxygenation reaction in this system.     

Effect of in-flight particle behavior on the morphology of flame sprayed Er2O3 splats

The morphology and microstructure of splats impact the comprehensive capability of a new coating methodology called chelate flame spraying (CFS). This study addresses the quantitative characterization of the spread morphologies of flame sprayed Er₂O₃ splats directly deposited under different spray conditions on aluminum alloy substrates with a mirror finish. The influence of the in-flight particle temperature and velocity, carrier gas type, and carrier gas ratio on the solidification mechanism of molten droplets was investigated. Image analysis methods were employed to identify single splats from the morphology observed with field-emission scanning electron microscopy (FE-SEM). In addition, Er₂O₃ films were synthesized on an Al–Mg alloy (A5052) substrate using N₂ or O₂ as the carrier gas. When O₂ was used as the carrier gas, 109-μm-thick films were deposited on the A5052 substrate. The cross-sectional porosity of the films was 3.8%. In contrast, films with 101-μm thickness were synthesized on the A5052 substrate when N₂ was used as the carrier gas. The cross-sectional porosity of these films was 13.8%. The results showed that the carrier gas type (N₂) and carrier gas ratio had a significant effect on the flattening behavior of the molten droplets. A spraying method combined with multidimensional modes is proposed to control the morphology of the splats.     

Enhanced Development of Azoxymethane-Induced Colonic Preneoplastic Lesions in Hypertensive Rats

Metabolic syndrome is associated with an increased risk of colorectal cancer. This study investigated the impact of hypertension, a component of metabolic syndrome, on azoxymethane (AOM)-induced colorectal carcinogenesis using SHRSP/Izm (SHRSP) non-diabetic/hypertensive rats and SHRSP.Z-Lepr^fa/IzmDmcr (SHRSP-ZF) diabetic/hypertensive rats. Male 6-week-old SHRSP, SHRSP-ZF, and control non-diabetic/normotensive Wister Kyoto/Izm (WKY) rats were given 2 weekly intraperitoneal injections of AOM (20 mg/kg body weight). Two weeks after the last injection of AOM, the SHRSP and SHRSP-ZF rats became hypertensive compared to the control WKY rats. Serum levels of angiotensin-II, the active product of the renin-angiotensin system, were elevated in both SHRSP and SHRSP-ZF rats, but only the SHRSP-ZF rats developed insulin resistance, dyslipidemia, and hyperleptinemia and exhibited an increase in adipose tissue. The development of AOM-induced colonic preneoplastic lesions and aberrant crypts foci, was significantly accelerated in both SHRSP and SHRSP-ZF hypertensive rats, compared to WKY normotensive rats. Furthermore, induction of oxidative stress and exacerbation of inflammation were observed in the colonic mucosa and systemically in SHRSP and SHRSP-ZF rats. Our findings suggest that hypertension plays a role in the early stage of colorectal carcinogenesis by inducing oxidative stress and chronic inflammation, which might be associated with activation of the renin-angiotensin system.     

Possible Mechanism of Inhibition of 6-Methoxy-Benzoxazolin-2(3H)-One on Germination of Cress (Lepidium sativum L.)

6-Methoxy-benzoxazolin-2(3H)-one (MBOA) inhibited the germination of cress (Lepidium sativum L.) seeds at concentrations greater than 0.03 mM. Inhibition was overcome by sucrose, suggesting that MBOA may inhibit sugar metabolism in cress seeds. Induction of α-amylase activity in seeds was also inhibited by MBOA at concentrations greater than 0.03 mM. Inhibition of both germination and induction of α-amylase activity increased with increasing concentrations of MBOA, and the extent of germination correlated positively with the activity of α-amylase in the seeds. MBOA added to a reaction mixture for α-amylase assay did not affect enzyme activity, indicating that MBOA does not inhibit in vitro α-amylase activity. Cress seeds germinated approximately 16 hr after incubation, and inhibition of α-amylase by MBOA occurred within 6 hr after incubation. These results suggest that MBOA may inhibit the germination of cress seeds by inhibiting the induction of α-amylase activity, because α-amylase plays a key role in the conversion of reserve carbohydrate into soluble sugars, a prerequisite for seed germination.     

Robust and accurate prediction of thermal error of machining centers under operations with cutting fluid supply

A novel temperature measuring system named LATSIS was proposed to realize a robust and accurate prediction of the thermal deformation of machining centers, even under external disturbances such as cutting fluid supply. LATSIS enables a drastic increase in the number of sensors employed for measuring the temperature of the machine tool. Thus, the entire temperature distribution can be obtained by interpolating the measured temperature 3-dimensionally without calculating the heat conduction. A set of experiments was conducted in which the LATSIS was employed to predict the TCP error. A total of 284 sensors were placed on the machining center, and the TCP error was predicted based on the measured temperature for the situation with/without the cutting fluid supply. The results of the prediction showed good agreement with the measured TCP error even during the initial transient temperature change as well as in the cooling phase after the machine halt. The TCP error with the cutting fluid supply is accurately predicted. LATSIS was proven to be a robust and accurate method for predicting the thermal deformation of machine tools, and is a promising technology for future manufacturing systems.     

Current steel forgings and their properties for steam generator of nuclear power plant

Current steel forgings used for the construction of steam generators (SGs) for a nuclear power plant (NPP) were introduced from the following three (3) features. (1) Integral type steel forgings such as (i) primary head integrated with nozzles, manways and supports, (ii) steam drum head integrated with nozzle and handhole, (iii) conical shell integrated with cylindrical sections and handholes, have been developed to enhance the structural integrity of the component and to make fabrication and inspection including in-service inspection easier. (2) The high strength steel such as SA508 Cl.3a has been adopted to decrease the weight of components, resulting in enhancement of aseismatic properties of SG. (3) Low Si SA508 Cl.3 steel with the addition of Al was investigated and was applied to a heavy thick tube sheet forging, to minimize the macro- and micro-segregations in the ingot.     

Cytoskeletal Protein 4.1G Is Essential for the Primary Ciliogenesis and Osteoblast Differentiation in Bone Formation

The primary cilium is a hair-like immotile organelle with specific membrane receptors, including the receptor of Hedgehog signaling, smoothened. The cilium organized in preosteoblasts promotes differentiation of the cells into osteoblasts (osteoblast differentiation) by mediating Hedgehog signaling to achieve bone formation. Notably, 4.1G is a plasma membrane-associated cytoskeletal protein that plays essential roles in various tissues, including the peripheral nervous system, testis, and retina. However, its function in the bone remains unexplored. In this study, we identified 4.1G expression in the bone. We found that, in the 4.1G-knockout mice, calcium deposits and primary cilium formation were suppressed in the trabecular bone, which is preosteoblast-rich region of the newborn tibia, indicating that 4.1G is a prerequisite for osteoblast differentiation by organizing the primary cilia in preosteoblasts. Next, we found that the primary cilium was elongated in the differentiating mouse preosteoblast cell line MC3T3-E1, whereas the knockdown of 4.1G suppressed its elongation. Moreover, 4.1G-knockdown suppressed the induction of the cilia-mediated Hedgehog signaling and subsequent osteoblast differentiation. These results demonstrate a new regulatory mechanism of 4.1G in bone formation that promotes the primary ciliogenesis in the differentiating preosteoblasts and induction of cilia-mediated osteoblast differentiation, resulting in bone formation at the newborn stage.     

新一代超小型DIP-IPM

为了满足空调、洗衣机、冰箱等白色家电对高效、高性能的需要,三菱电机开发了新一代超小型第四代(Ver.4)双列直插封装的智能功率模块(Dual-In-linePackageIntelligentPowerModule,简称DIP-IPM)。本文首先分析了第四代超小型DIP-IPM内部电路的构成和功能,然后详细介绍了第四代DIP-IPM生产过程中的关键技术,包括无铅化、高热传导性绝缘片、chip-to-chip导线直接连接以及ASIC技术,最后与第三代(Ver.3)DIP-IPM进行了比较。     

Photonic bandgap fibers with high birefringence

A highly birefringent air-guiding photonic crystal fiber which provides guidance by a full two-dimensional photonic bandgap (PBG) effect is proposed. The fiber core is formed by introducing a large air hole that has an area of four unit cells of the cladding materials. It is shown from computed results by a full-vector finite element method that the proposed PBG fiber has birefringence of the order of 10/sup -3/.