Microstructural evolution of a commercial ultrafine alumina powder densified by different methods

The densification and grain growth of bodies made from a commercial ultrafine alumina powder was investigated. The primary powder was initially subjected to dry (uniaxial cold pressing) and wet shaping (slip casting), followed by conventional (CS)-, two step (TSS)-, and microwave (MS) sintering to explore the effect of each series of treatments on the densification and microstructural evolution of the specimens. It was demonstrated that a uniform microstructure with higher density would be obtained using the wet shaping method. In addition, microwave sintering was found to be more effective into the densification of the specimens and in yielding a finer grain structure. It is believed that the high heating rate and effective particle packing are responsible for the improvements in these properties. On this basis, it was also demonstrated that the fracture toughness of the samples increased significantly through the application of microwave sintering.     

Agitation of Herschel–Bulkley fluids with the Scaba–anchor coaxial mixers

The design of the coaxial mixers depends on many interrelated parameters including the geometry and dimensions of the mixing vessel, the location and type of the impellers, speed ratio, impeller diameter, rotation mode, and fluid rheology. No study has been reported in the literature regarding the mixing performance of the coaxial mixers in the agitation of yield-pseudoplastic fluids. Thus, the main objective of this study was to evaluate the performance of a Scaba–anchor coaxial mixer (a novel configuration) in the mixing of xanthan gum solutions (yield-pseudoplastic fluids). The Herschel–Bulkley model was used to describe the rheological behavior of the xanthan gum solutions. To develop new correlations for the generalized Reynolds and power numbers of the coaxial mixers employed in the agitation of this class of non-Newtonian fluids, we utilized numerous experimental and computational fluid dynamics (CFD) data. The new correlations were tested successfully at different operating conditions (e.g. speed ratio, fluid rheology, and operation mode).     

Pearlite determination in plain carbon steel by eddy current method

Eddy current method has been used for the evaluation of pearlitic microstructure in low to high plain carbon steels. Plain carbon steel samples were heat treated in a furnace. Half of these were slowly cooled in the furnace and half in the air. This resulted in different pearlitic microstructures in the samples. Eddy current readings for all the samples were recorded and studied. It was found that eddy current measurement can be used for obtaining reliable and quick detection of pearlitic percentage in plain carbon steels.     

Effect of dust-neutral collisions on the dust characteristics in a magnetized plasma sheath

The characteristics of dust in a plasma sheath are investigated in the presence of an external magnetic field and taking into account the dust-neutral collision force. The continuity and momentum equations of ions and dust particles are solved numerically with various magnitudes of collision force by using the fluid model. The numerical results have revealed that the collision force reduces the dust gyro radius, changes the positions of the extrema of the dust density and the velocity in the depth direction. It is shown that the collision force reduces the dust kinetic energy which has no fluctuation even in a strong external magnetic field.     

Optimization of hole-making operations: a tabu-search approach

This paper reports a tabu-search approach to minimize the total processing cost for hole-making operations. Four issues, namely, tool travel scheduling, tool switch scheduling, tool selection, and machining speed specification have been simultaneously addressed in this study. The total processing cost consists of tooling cost, machining cost, non-productive tool travelling cost, and tool switching cost. This problem has a structure similar to the Travelling Salesman Problem (TSP) and hence is NP-complete. In addition, the problem under consideration is more complex since the cost associated with each operation is both sequence-dependent and position-dependent. To provide an efficient solution procedure, a tabu search approach is used. To improve the search performance two new neighbourhood generation and move selection policies have been proposed and tested. The decisions on the above issues can be made simultaneously based on the output of the proposed algorithm. The results obtained from computational experiments show that the total processing cost can be significantly reduced within a reasonable search time. The effects of some search parameters and diversification strategies on the search performance have also been investigated.     

Multiple Abiotic Stresses Applied Simultaneously Elicit Distinct Responses in Two Contrasting Rice Cultivars

Rice crops are often subject to multiple abiotic stresses simultaneously in both natural and cultivated environments, resulting in yield reductions beyond those expected from single stress. We report physiological changes after a 4 day exposure to combined drought, salt and extreme temperature treatments, following a 2 day salinity pre-treatment in two rice genotypes—Nipponbare (a paddy rice) and IAC1131 (an upland landrace). Stomata closed after two days of combined stresses, causing intercellular CO2 concentrations and assimilation rates to diminish rapidly. Abscisic acid (ABA) levels increased at least five-fold but did not differ significantly between the genotypes. Tandem Mass Tag isotopic labelling quantitative proteomics revealed 6215 reproducibly identified proteins in mature leaves across the two genotypes and three time points (0, 2 and 4 days of stress). Of these, 987 were differentially expressed due to stress (cf. control plants), including 41 proteins that changed significantly in abundance in all stressed plants. Heat shock proteins, late embryogenesis abundant proteins and photosynthesis-related proteins were consistently responsive to stress in both Nipponbare and IAC1131. Remarkably, even after 2 days of stress there were almost six times fewer proteins differentially expressed in IAC1131 than Nipponbare. This contrast in the translational response to multiple stresses is consistent with the known tolerance of IAC1131 to dryland conditions.     

广域保护中基于能量守恒原理的母线及输电线差动保护

提出一种基于能量守恒原理的纵联差动保护,对线路两端或母线各端的有功功率进行比较,若各端功率的和超出整定值,则判定为区内故障。在典型400 kV输电系统模型上,运用MATLAB仿真软件对所提出的原理进行了仿真验证。仿真结果表明,该方法比传统电流比率差动保护更加可靠且计算量小,因而可缩短动作时间。该方法能检测所有故障类型,适应于超高压远距离输电线路。     

Increasing ethylene production as a high value hydrocarbon in Fischer-Tropsch (FT) reactor: A concept reactor for combining FT with oxidative coupling of methane

The paper proposes a concept configuration of reactors for coupling OCM and FTS, and presents systematic simulation results. FTS section is a combination of fixed bed and membrane fluidized bed reactor, and feed of the FT reactor is supplied by OCM. The reactor configuration is compared with the consecutive reactors of OCM and one fixed bed FT reactor. Effects of CH₄/O₂ ratio, percent of N₂ in the feed, contact time, and input temperature on the yield of ethylene and valuable hydrocarbons are studied. The results show that compared with one FTS reactor configuration, the dual FTS reactor configuration is more effective and thus gives much higher product yields. Furthermore, a main decrease is observed in the formation of CO₂ and CH₄.