Mechanical alloying in the Al-Bi alloy system

Mechanical alloying (MA) was carried out to investigate the MA behaviour of the immiscible Al-10, 30 at % Bi alloys. After the MA processing, the Al and Bi were finely and homogeneously alloyed. The Bi crystallite size decreased to 25 nm and 30 nm in the Al-10 at % Bi and Al-30 at % Bi alloys, respectively. By increasing the MA time, the hardness increased up to a value of 80 H _v, which is larger than that obtained from the rule of mixtures. The lattice parameter of Bi decreased by about 0.27%, which shows the formation of a non-equilibrium hcp Bi super-saturated solid solution. The extended solubility of Al in Bi was 1.9% in the Al-30 at % Bi alloy. Due to the extended solubility, depression of the melting temperature of hcp Bi was confirmed in the mechanically alloyed Al-Bi alloys. The maximum depression in the temperature was about 10 K. The measured values corresponded well with those estimated from the extrapolation of the solidus line.     

���þ��ܰ�ȫ�Բ�������������

本文通过对在用钻机井架的现场实际测试,建立数据库、测评模型,对实测的数据用计算机技术进行分析,提出了初始弯曲应力;数据正态分布检验——x～2检验;建立回归方程;在给定置信度下测评当前承载能力的技术概念。解决了在用钻机A型井架的安全性评估问题,是一种较为合理、可靠、科学的测评技术和方法。     

Preparation of core–shell type nanoparticles of diblock copolymers of poly(L‐lactide)/poly(ethylene glycol) and their characterization in vitro

Core–shell type nanoparticles of poly(L ‐lactide)/poly(ethylene glycol) (LE) diblock copolymer were prepared by a dialysis technique. Their size was confirmed as 40–70 nm using photon correlation spectroscopy. The ¹H‐NMR analysis confirmed the formation of core–shell type nanoparticles and drug loading. The particle size, drug loading, and drug release rate of the LE nanoparticles were slightly changed by the initial solvents that were used. The drug release behavior of LE core–shell type nanoparticles showed an initial burst during the first 12 h and then a sustained release until 100 h. The degradation behavior of LE block copolymer nanoparticles was divided into three phases: the initial rapid degradation phase, the stationary phase, and the rapid degradation phase until complete degradation. It was suggested that lidocaine release kinetics were predominantly governed by the diffusion mechanism in the initial burst phase and after that by both of the diffusion and degradation mechanisms. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2625–2634, 2002     

一种新型同位素示踪剂载体及应用

同位素沾污、低注井同位素示踪剂因沉降造成的上返速度慢或无法上返、大孔道地层同位素示踪剂失踪等是影响注水开发油田后期吸水剖面测井资料质量的主要问题。同位素示踪剂载体的物理参数，尤其是其密度，是产生上述问题的重要因素。通过对同位素示踪剂载体技术指标优选而生产的一种新型同位素示踪剂，可以解决低注井同位素上返速度慢的问题，并能有效识别大孔道地层，减少同位素沾污。这种同位素示踪剂载体已在河南油田吸水剖面测井中应用，并见到了很好的效果。     

提高20t电弧炉炉衬寿命工艺实践

炉渣碱度、泡沫渣高度、吹氧角度、补炉方式等是影响20t电弧炉炉衬寿命的主要因素。为了提高炉衬寿命,莱钢炼钢厂采取了控制炉渣组成、泡沫渣全程埋弧操作、吹氧、喷补炉衬等多项措施,使炉衬寿命稳定在600炉次以上。     

钻杆防磨技术的现状和发展

在深井超深井勘探过程中，由于径向力、涡动、横向振动等因素的存在，随着钻井时间的增长，钻柱作用于套管内壁的侧向力增大，导致套管磨损的问题越来越严重。介绍了近年来钻杆防磨技术的发展，主要从钻杆接头表面处理和钻杆保护器2方面来研究防磨减磨措施的现状和发展。     

三相四线统一电能质量调节器的控制策略

针对电网输入电压的不平衡、非正弦及负载的不平衡、非线性特性，提出了一种基于三相静止坐标系下的三相四线统一电能质量调节器（UPQC）的协调控制策略。该策略将UPQC的串联变流器控制为基波正弦电流源，而并联变流器控制为基波正弦电压源，从而实现了三相四线UPQC对电能质量的综合控制能力，既改善了电网侧的电能质量问题，实现了电网输入电流的正弦及单位输入功率因数，也改善了负载侧的电能质量问题，实现了负载电压的平衡、额定及正弦。10 kVA系统实验装置的实验结果表明了该控制策略的有效性。     

龙开口水电站溢流坝段动力模型破坏试验研究

采用仿真混凝土材料研究了龙开口水电站溢流坝段在不同因素影响下的动力破坏特征,并通过对6个模型试验结果的分析探讨了溢流坝段的动力破坏机理。试验中考虑了坝体-库水的动力相互作用以及横河向地震动对大坝破坏的影响,采用规范谱波和场地谱波两种地震动激励进行模型超载破坏分析。试验结果为工程设计和评价溢流坝段的抗震性能提供依据。     

河流二维水质模型与地理信息系统的集成研究

根据水质预测、管理的不同需求,提出基于二维对流扩散方程的三种水质计算模式:连续点源排放水质模型,瞬时点源排放水质模型,有限体积法求解的数值解水质模型。基于MO进行GIS系统的组件式开发,实现了GIS平台下河势贴体河道二维正交网格的自动生成,解决了二维水体的空间网格离散问题。在此基础上,将三种类型的二维水质模型模块与GIS平台集成,以更好满足水质预测与管理在水质模型计算方式选取、计算精度与实现效率等方面的需求。     

某跨线桥施工支架方案设计

结合某大桥的概况,根据梁体施工工艺要求、现场实地勘察情况确定跨线施工方案,支架采用布架灵活、搭拆方便、承载力大的WDJ碗扣式多功能钢支架,部分预应力现浇连续箱梁采用支墩加纵梁预留门洞的支架现浇,取得良好效果。