Finite‐element analysis of laminated rubber bearing of building frame under seismic excitation

Finite element analysis is carried out for a building frame supported by laminated rubber bearings to simultaneously investigate global displacement and local stress responses under seismic excitation. The frame members and the rubber bearings are discretized into hexahedral solid elements with more than 3 million degrees of freedom. The material property of rubber is represented by the Ogden model, and the frame is assumed to remain in elastic range. It is shown that the time histories of non‐uniform stress distribution and rocking behavior of the rubber bearings under a frame subjected to seismic excitation can be successfully evaluated, and detailed responses of base and frame can be evaluated through large‐scale finite element analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

Roles of Continental Shelves and Marginal Seas in the Biogeochemical Cycles of the North Pacific Ocean

Most marginal seas in the North Pacific are fed by nutrients supported mainly by upwelling and many are undersaturated with respect to atmospheric CO₂ in the surface water mainly as a result of the biological pump and winter cooling. These seas absorb CO₂ at an average rate of 1.1 ± 0.3 mol C m⁻²yr⁻¹ but release N₂/N₂O at an average rate of 0.07 ± 0.03 mol N m⁻²yr⁻¹. Most of primary production, however, is regenerated on the shelves, and only less than 15% is transported to the open oceans as dissolved and particulate organic carbon (POC) with a small amount of POC deposited in the sediments. It is estimated that seawater in the marginal seas in the North Pacific alone may have taken up 1.6 ± 0.3 Gt (10¹⁵ g) of excess carbon, including 0.21 ± 0.05 Gt for the Bering Sea, 0.18 ± 0.08 Gt for the Okhotsk Sea; 0.31 ± 0.05 Gt for the Japan/East Sea; 0.07 ± 0.02 Gt for the East China and Yellow Seas; 0.80 ± 0.15 Gt for the South China Sea; and 0.015 ± 0.005 Gt for the Gulf of California. More importantly, high latitude marginal seas such as the Bering and Okhotsk Seas may act as conveyer belts in exporting 0.1 ± 0.08 Gt C anthropogenic, excess CO₂ into the North Pacific Intermediate Water per year. The upward migration of calcite and aragonite saturation horizons due to the penetration of excess CO₂ may also make the shelf deposits on the Bering and Okhotsk Seas more susceptible to dissolution, which would then neutralize excess CO₂ in the near future. Further, because most nutrients come from upwelling, increased water consumption on land and damming of major rivers may reduce freshwater output and the buoyancy effect on the shelves. As a result, upwelling, nutrient input and biological productivity may all be reduced in the future. As a final note, the Japan/East Sea has started to show responses to global warming. Warmer surface layer has reduced upwelling of nutrient-rich subsurface water, resulting in a decline of spring phytoplankton biomass. Less bottom water formation because of less winter cooling may lead to the disappearance of the bottom water as early as 2040. Or else, an anoxic condition may form as early as 2200 AD. This revised version was published online in July 2006 with corrections to the Cover Date.     

Measurement of Impact Ejecta from Regolith Targets in Oblique Impacts

This paper reports the results of experiments on projectile impact into regolith targets at various impact angles. Copper projectiles of 240 mg are accelerated to 197 to 272 m s⁻¹ using an electromagnetic gun. The ejecta are detected by thin Al foil targets as secondary targets, and the resulting holes on the foil are measured to derive the spatial distribution of the ejecta. The ejecta that penetrated the foil are concentrated toward the downrange azimuths of impacting projectiles in oblique impacts. In order to investigate the ejecta velocity distribution, the nondimensional volume of ejecta with velocities higher than a given value is calculated from the spatial distribution. In the case of the vertical impact of the projectile, most ejecta have velocities lower than 24% of the projectile speed (∼50 m s⁻¹), and there are only several ejecta with velocities higher than 72 m s⁻¹. This result confirms the existence of an upper limit to the ejection velocity in the ejecta velocity distribution (Hartmann cutoff velocity) (W. K. Hartmann, 1985, Icarus63, 69-98). On the other hand, it is found that, in the oblique impacts, there are a large number of ejecta with velocities higher than the Hartmann cutoff velocity. The relative quantity of ejecta above the Hartmann cutoff velocity increases as the projectile impact angle decreases. Taking these results with the results of S. Yamamoto and A. M. Nakamura (1997, Icarus128, 160-170) from impact experiments using an impact angle of 30°, it can be concluded that the ejecta from these regolith targets exhibit a bimodal velocity distribution. Below a few tens of m s⁻¹, we see the expected velocity distribution of ejecta, but above this velocity we see a separate group of high-velocity ejecta.     

The chemical composition and nickel,cobalt, copper,zinc and lead contents of Nanao Bay sediments

The contents of major and some of the minor elements, nickel, cobalt, copper, zinc and lead were studied on sediments collected from three inlets of Nanao Bay located at eastern side of Noto Peninsula. Little variation was found on the average contents of silicon, iron, titanium, aluminum, manganese, magnesium and potassium among the sediments of West, South and North Bays in Nanao Bay. Whereas significant difference was found on the contents of calcium, chlorine, sulfur and nitrogen among sediments of three bays.As to the minor elements, the average contents of nickel (20±5 ppm), cobalt (5±1 ppm), copper (18±5 ppm) and lead (17±8 ppm) are relatively low but zinc content is high in these sediments comparing with those of coastal deposit around Japan Island. From the results obtained here, it became clear that no environmental contamination of nickel, cobalt, copper and lead, and a little organic pollution were found in Nanao Bay sediments.     

Lunar photometric properties at wavelengths 0.5-1.6 μm acquired by SELENE Spectral Profiler and their dependency on local albedo and latitudinal zones

The lunar photometric function, which describes the dependency of the observed radiance on the observation geometry, is used for photometric correction of lunar visible/near-infrared data. A precise photometric correction parameter set is crucial for many applications including mineral identification and reflectance map mosaics. We present, for the first time, spectrally continuous photometric correction parameters for both sides of the Moon for wavelengths in the range 0.5-1.6 μm and solar phase angles between 5° and 85°, derived from Kaguya (SELENE) Spectral Profiler (SP) data. Since the measured radiance also depends on the surface albedo, we developed a statistical method for selecting areas with relatively uniform albedos from a nearly 7000-orbit SP data set. Using the selected data set, we obtained empirical photometric correction parameter sets for three albedo groups (high, medium, and low). We did this because the photometric function depends on the albedo, especially at phase angles below about 20° for which the shadow hiding opposition effect is appreciable. We determined the parameters in 160 bands and discovered a small variation in the opposition effect due to the albedo variation of mafic mineral absorption. The consistency of the photometric correction was checked by comparing observations made at different times of the same area on the lunar surface. Variations in the spectra obtained were lower than 2%, except for the large phase angle data in mare. Lastly, we developed a correction method for low solar elevation data, which is required for high latitude regions. By investigating low solar elevation data, we introduced an additional correction method. We used the new photometric correction to generate a 1° mesh global lunar reflectance map cube in a wavelength range of 0.5-1.6 μm. Surprisingly, these maps reveal that high latitude (?75°) regions in both the north and south have much lower spectral continuum slopes (color ratio r_1547.7nm/r_752.8nm ? 1.8) than the low and medium latitude regions, which implies lower degrees of space weathering.     

Zircon U–Pb ages of granitic and mafic dikes associated with granitoids and metamorphic rocks of the Ryoke Belt in the eastern Kii Peninsula,southwest Japan

Zircon U–Pb dates for felsic and intermediate to mafic dikes intruding into the Ryoke granitoids and metamorphic rocks at selected outcrops in the Takamiyama area of the eastern Kii Peninsula, southwest Japan, were determined along with their geology and petrography to reveal the history of Cretaceous magmatism. At each outcrop, the felsic and intermediate to mafic dikes exhibit specific structures that are indicative of magma intermingling and have coeval intrusion ages of ca. 81–77 Ma. Our zircon U–Pb data complement previously published data, suggesting that the mafic magmatism continued intermittently from 83 to 76 Ma in the Takamiyama area and that magmatism migrated eastward within the Ryoke Belt. A comparison of intrusion ages between a dike and a host Ryoke granitoid at one outcrop indicates that the host rock experienced ductile deformation at ~88 to ~83 Ma. Judging from the small number of zircons and the concordant date distributions, we didn't recognize the evidence suggesting the partial melting of the host rocks, as Nakajima et al. (Journal of the Geological Society of Japan, 2021, 127, 69–78) reported.     

Mesoscale structures of two types of cold-air outbreaks over the East China Sea and the effect of coastal sea surface temperature

Two types of cold-air outbreaks over the Yellow and East China Seas are investigated using a regional mesoscale model. Distinct patterns of surface turbulent heat fluxes and precipitation are identified between the two cases. The sea surface heat flux and frictional velocity are strongly influenced by mesoscale differences between high- and low-resolution datasets of sea surface temperature (SST). The influence of the SST difference on atmospheric water is spread to the downstream area of the outbreak with the phase transition of water. The air mass transformation around 800?hPa over the Kuroshio is partly influenced by the upstream SST difference. In particular, the SST difference near the mouth of the Yanzi River strongly modifies the air mass around Taiwan. Thus, in addition to the Kuroshio front, the mesoscale Chinese coastal SST structure is also important in the air mass transformation over the East China Sea.     

Nonlinear behavior of high-damping rubber bearings under horizontal bidirectional loading: full-scale tests and analytical modeling

Horizontal bidirectional loading tests are conducted for real-sized high-damping rubber (HDR) bearings with diameters of 700 mm (HDR700) and 1300 mm (HDR1300). The hysteresis loops of these bearings under bidirectional horizontal loadings are compared with those under unidirectional loadings. The results show that the bearing force measurement in the primary direction of loading increases when there is displacement in the orthogonal direction. Unusually, the maximum restoring force in the orthogonal direction to the primary loading direction occurs near zero displacement. On the basis of the observations of the restoring forces, a rate-independent model is proposed. This model simulates well the test results under both bidirectional loading and unidirectional loading. It can reproduce the irregular restoring forces characteristics around zero displacement as described above. Bidirectional loading induced twist deformation in the HDR bearings that increased local shear strains. This phenomenon results in an early failure as observed in HDR700. The additional shear strain is estimated based on the twist deformation measured by video image analysis. The comparison of the nominal total shear stress demonstrates that the increase of shear stress because of bidirectional loading occurs when the average shear strain is larger than about 200%. The larger the shear strain, the greater the bidirectional effect. It is shown that the nominal total shear stress of average strain of 350% under bidirectional circular loading pattern is approximately the same as the average shear strain of 400% under unidirectional loading. This means that the average shear strain of 350% under a bidirectional circular loading corresponds to a local shear strain of 400%. Copyright © 2012 John Wiley & Sons, Ltd.     

Dynamic evolution of nutrient discharge under stormflow and baseflow conditions in a coastal agricultural watershed in Ishigaki Island,Okinawa, Japan

Excessive terrestrial nutrient loadings adversely impact coral reefs by primarily enhancing growth of macroalgae, potentially leading to a phase‐shift phenomenon. Hydrological processes and other spatial and temporal factors affecting nutrient discharge must be examined to be able to formulate effective measures for reducing nutrient export to adjacent reefs. During storm events and baseflow periods, water samples were obtained from the tropical Todoroki River, which drains an intensively agricultural watershed into Shiraho coral reef. In situ nutrient analyzers were deployed for 6 months to hourly measure dissolved nutrient (NO₃⁻‐N and PO₄³⁻‐P) concentrations. Total phosphorus (TP) and suspended solid concentration (TSS) were increased by higher rainfall intensity (r = 0·94, p < 0·01) and river discharge Q (r = 0·88, p < 0·01). In contrast, NO₃⁻‐N concentration tends to decrease drastically (e.g. from 3 to 1 mg l⁻¹) during flood events. When base flow starts to dominate afterwards, NO₃⁻‐N manifested an increasing trend, but decreases when baseflow discharge becomes low. This counter‐clockwise hysteresis for NO₃⁻‐N highlights the significant influence of groundwater discharge. N delivery can therefore be considered a persistent process compared to sediment and P discharge, which are highly episodic in nature. Based on GIS analysis, nutrient concentration along the Todoroki River was largely affected by the percentage of sugarcane/bare areas and bedrock type. The spatial distribution of N concentration in the river reflects the considerable influence of subsurface geology—higher N levels in limestone‐dominated areas. P concentrations were directly related to the total length of artificial drainage, which enhances sediment transport. The use of high‐resolution monitoring data coupled with GIS‐based spatial analysis therefore enabled the clarification of control factors and the difference in the spatio‐temporal discharge characteristics between N and P. Thus, although erosion‐reduction schemes would reduce P discharge, other approaches (e.g. minimize fertilizer) are needed to reduce N discharge. Copyright © 2010 John Wiley & Sons, Ltd.