Natural Gradient Tracer Test to Evaluate Natural Attenuation of MTBE Under Anaerobic Conditions

A natural gradient tracer test using perdeuterated MTBE was conducted in an anaerobic aquifer to determine the relative importance of dispersion and degradation in reducing MTBE concentrations in ground water. Preliminary ground water chemistry and hydraulic conductivity data were used to place the tracer within an existing dissolved MTBE plume at Port Hueneme, California. Following one year of transport, the tracer plume was characterized in detail.
Longitudinal dispersion was identified as the dominant mechanism for lowering the perdeuterated MTBE concentrations. The method of moments was used to determine the longitudinal and lateral dispersion coefficients (0.85 m²/day and 0.08 m²/day, respectively). A mass-balance analysis, carried out after one year of transport, accounted for 110% of the injected mass and indicated that no significant mass loss occurred. The plume structure created by zones of higher and lower hydraulic conductivity at the site was complex, consisting of several localized areas of high tracer concentration in a lower concentration plume. This is important because the aquifer has generally been characterized as exhibiting fairly minor heterogeneity. In addition, the tracer plume followed a curved flowpath that deviated from the more macroscopic direction of ground water flow inferred from local ground water elevation measurements and the behavior of the existing plume. Understanding the mass balance, plume structure, curvature of the tracer plume, and consequently natural attenuation behavior required the detailed sampling approach employed in this study. These data imply that a detailed understanding of site hydrogeology and an extensive sampling network may be critical for the correct interpretation of monitored natural attenuation of MTBE.     

Application of discovery process models in estimating petroleum resources at the play level in China

Discovery process modeling has gained wide acceptance in the Chinese exploration community. In recent years, a variety of discovery process models have been applied to the prediction of undiscovered petroleum resources at the play level in sedimentary basins in China. However, challenging problems have been encountered, particularly when one method alone has been applied to small plays in nonmarine sedimentary basins or in plays with an unusual order of discovery wells. This paper presents results gotten by using the lognormal discovery process model of the Geological Survey of Canada and the geoanchored method for three petroleum plays in basins with different geologic settings. Although the predicted shapes of the parentsize distributions which use these two models, were not always similar, the expected values of the total resources and the number of fields (pools) to be discovered are comparable. The combined use of two discovery process models in the same play compensates for the weaknesses in one method compared with the other and vice versa. Thus, more reliable estimates are the result.     

Productivity Profiles of PhD-Granting Geography Departments in the Unites States: 1980–1994

In our study, 48 U.S. departments that grant geography PhDs are compared along four measures of academic productivity. Using 1980–1994 as the base period, research productivity of faculty was assessed by counting book titles, as well as authorships in 77 journals. Teaching productivity was determined by placement of PhDs in graduate programs of geography in North America, and by a weighted index of teaching outcomes. Data were summed for departments, but are reported primarily as productivity per person (per FTE count). The results point to a wide variety of departmental profiles, from those departments that appear to emphasize teaching outcomes to those that are more productive in book publishing and journal authorship, with several exhibiting a balance between teaching and research.     

ELF and VLF wave generation by HF heating: A comparison of AM and CW techniques

Antenna field 2 of the Tromsø Heating facility consists of six rows of six horizontal crossed full wave dipoles aligned with the rows running geographic east-west. In previous experiments on ELF/VLF wave generation it has been the practice to feed the rows in parallel, with HF radiation amplitude modulated at the ELF/VLF frequency it was desired to radiate (AM configuration). Here we describe how the antenna array was also configured so that it could be fed with a continuous wave (CW) input power but still carry information at an ELF/VLF frequency. To effect this the three southern most rows of the antenna array were driven with a CW signal at 4.04 MHz and the three northernmost rows with a CW signal at frequency greater than 4.04 MHz by the ELF/VLF frequency it was desired to radiate (CW configuration). Experiments were performed with modulation/difference frequencies of 565 and 2005 Hz and the signals were received at the Lycksele Geophysical Observatory, 500 km south of the heating facility. The signals were typically 11 dB greater in the AM than the CW configuration, despite the fact that the average power delivered to the ionosphere in the CW configuration was four times that in the AM configuration. Significant harmonic radiation (both odd and even) was produced in the AM configuration but no harmonic radiation was detected in the CW configuration. A simple theory has been developed to model the fields produced by HF heating using the two techniques (AM,CW). A good agreement has been obtained between the experimental observations and model computations. The model has been extended to show how the relative efficiency of generation, AM/CW, varies with the frequency of the ELF/VLF radiation and HF antenna element spacing. Radiation patterns for the ‘ionospheric ELF/VLF antenna’ have also been derived for the two generation techniques.