Simplified formulae for designing coastal forest against tsunami run-up: one-dimensional approach

In the present study, laboratory experiments were conducted to validate the applicability of a numerical model based on one-dimensional nonlinear long-wave equations. The model includes drag and inertia resistance of trees to tsunami flow and porosity between trees and a simplified forest in a wave channel. It was confirmed that the water surface elevation and flow velocity by the numerical simulations agree well with the experimental results for various forest conditions of width and tree density. Further, the numerical model was applied to prototype conditions of a coastal forest of Pandanus odoratissimus to investigate the effects of forest conditions (width and tree density) and incident tsunami conditions (period and height) on run-up height and potential tsunami force. The modeling results were represented in curve-fit equations with the aim of providing simplified formulae for designing coastal forest against tsunamis. The run-up height and potential tsunami forces calculated by the curve-fit formulae and the numerical model agreed within ± 10% error.     

Presolar spinel grains from the Murray and Murchison carbonaceous chondrites

With a new type of ion microprobe, the NanoSIMS, we determined the oxygen isotopic compositions of small (<1μm) oxide grains in chemical separates from two CM2 carbonaceous meteorites, Murray and Murchison. Among 628 grains from Murray separate CF (mean diameter 0.15 μm) we discovered 15 presolar spinel and 3 presolar corundum grains, among 753 grains from Murray separate CG (mean diameter 0.45 μm) 9 presolar spinel grains, and among 473 grains from Murchison separate KIE (mean diameter 0.5 μm) 2 presolar spinel and 4 presolar corundum grains. The abundance of presolar spinel is highest (2.4%) in the smallest size fraction. The total abundance in the whole meteorite is at least 1 ppm, which makes spinel the third-most abundant presolar grain species after nanodiamonds (if indeed a significant fraction of them are presolar) and silicon carbide. The O-isotopic distribution of the spinel grains is very similar to that of presolar corundum, the only statistically significant difference being that there is a larger fraction of corundum grains with large ¹⁷O excesses (¹⁷O/¹⁶O > 1.5 × 10⁻³), which indicates parent stars with masses between 1.8 and 4.5 M_⊙.     

Annual variation of atmospheric carbonyl sulfide in the marine atmosphere in the Southern Indian Ocean

Measurements of the concentrations of carbonyl sulfide (COS) in the marine atmosphere were made over a period of two years in the southern Indian Ocean (Amsterdam Island, 37°50 S–77°31 E; March 1987–February 1988 and April 1989–February 1990). The mean atmospheric COS concentration for the whole period was 475±48 pptv (n=544). Atmospheric COS concentrations show no significant seasonal variation with a summer to winter ratio of 1.05. Taking into account the observed variability of the atmospheric COS concentration (10%), a value of 1.4 yr is estimated as a lower limit for the atmospheric COS lifetime. A comparison of the COS data at Amsterdam Island with those obtained in the Southern Hemisphere in the past 12 yr does not reveal any significant trend in the tropospheric background COS mixing ratio.     

FEM × DEM modelling of cohesive granular materials: Numerical homogenisation and multi-scale simulations

The article presents a multi-scale modelling approach of cohesive granular materials, its numerical implementation and its results. At microscopic level, Discrete Element Method (DEM) is used to model dense grains packing. At the macroscopic level, the numerical solution is obtained by a Finite Element Method (FEM). In order to bridge the micro- and macro-scales, the concept of Representative Elementary Volume (REV) is applied, in which the average REV stress and the consistent tangent operators are obtained in each macroscopic integration point as the results of DEM’s simulation. In this way, the numerical constitutive law is determined through the detailed modelling of the microstructure, taking into account the nature of granular materials. We first elaborate the principle of the computation homogenisation (FEM × DEM), then demonstrate the features of our multiscale computation in terms of a biaxial compression test. Macroscopic strain location is observed and discussed.     

Seasonal variations of atmospheric sulfur dioxide and dimethylsulfide concentrations at Amsterdam Island in the southern Indian Ocean

Daily measurements of atmospheric sulfur dioxide (SO₂) concentrations were performed from March 1989 to January 1991 at Amsterdam Island (37°50 S–77°30 E), a remote site located in the southern Indian Ocean. Long-range transport of continental air masses was studied using Radon (²²²Rn) as continental tracer. Average monthly SO₂ concentrations range from less than 0.2 to 3.9 nmol m^-3 (annual average = 0.7 nmol m^-3) and present a seasonal cycle with a minimum in winter and a maximum in summer, similar to that described for atmospheric DMS concentrations measured during the same period. Clear diel correlation between atmospheric DMS and SO₂ concentrations is also observed during summer. A photochemical box model using measured atmospheric DMS concentrations as input data reproduces the seasonal variations in the measured atmospheric SO₂ concentrations within ±30%. Comparing between computed and measured SO₂ concentrations allowed us to estimate a yield of SO₂ from DMS oxidation of about 70%.     

Reliability index in geotechnics

In this paper, the reliability index β is examined for its applicability in geotechnics. A statistical finite difference scheme is proposed to evaluate partial derivatives of the limit state function, enabling the computation of the reliability index β. Through illustrative examples, it is demonstrated that the proposed procedure gives results in excellent agreement with those obtained by the Monte Carlo simulation method, and yet it involves considerable savings in computing time. Extension of the reliability index method to cover many classes of problems involving correlated variables is highlighted.     

Palaeo-hydrogeological control on groundwater As levels in Red River delta,Vietnam

To study the geological control on groundwater As concentrations in Red River delta, depth-specific groundwater sampling and geophysical logging in 11 monitoring wells was conducted along a 45 km transect across the southern and central part of the delta, and the literature on the Red River delta’s Quaternary geological development was reviewed. The water samples (n = 30) were analyzed for As, major ions, Fe²⁺, H₂S, NH₄, CH₄, δ¹⁸O and δD, and the geophysical log suite included natural gamma-ray, formation and fluid electrical conductivity. The SW part of the transect intersects deposits of grey estuarine clays and deltaic sands in a 15–20 km wide and 50–60 m deep Holocene incised valley. The NE part of the transect consists of 60–120 m of Pleistocene yellowish alluvial deposits underneath 10–30 m of estuarine clay overlain by a 10–20 m veneer of Holocene sediments. The distribution of δ¹⁸O-values (range −12.2‰ to −6.3‰) and hydraulic head in the sample wells indicate that the estuarine clay units divide the flow system into an upper Holocene aquifer and a lower Pleistocene aquifer. The groundwater samples were all anoxic, and contained Fe²⁺ (0.03–2.0 mM), Mn (0.7–320 μM), SO₄ (<2.1 μM–0.75 mM), H₂S (<0.1–7.0 μM), NH₄ (0.03–4.4 mM), and CH₄ (0.08–14.5 mM). Generally, higher concentrations of NH₄ and CH₄ and low concentrations of SO₄ were found in the SW part of the transect, dominated by Holocene deposits, while the opposite was the case for the NE part of the transect. The distribution of the groundwater As concentration (<0.013–11.7 μM; median 0.12 μM (9 μg/L)) is related to the distribution of NH₄, CH₄ and SO₄. Low concentrations of As (?0.32 μM) were found in the Pleistocene aquifer, while the highest As concentrations were found in the Holocene aquifer. PHREEQC-2 speciation calculations indicated that Fe²⁺ and H₂S concentrations are controlled by equilibrium for disordered mackinawite and precipitation of siderite. An elevated groundwater salinity (Cl range 0.19–65.1 mM) was observed in both aquifers, and dominated in the deep aquifer. A negative correlation between aqueous As and an estimate of reduced SO₄ was observed, indicating that Fe sulphide precipitation poses a secondary control on the groundwater As concentration.     

Geochemistry,zircon U–PB ages and HF isotopes of the Muong Luan granitoid pluton,Northwest Vietnam and its petrogenetic significance

The Indosinian Orogeny plays a significant role in tectonic background and magmatic evolution in Indochina and surrounding regions. Being a part product of the Indosinian magmatism in northwest Vietnam during late Permian–middle Triassic period, Muong Luan granitoid pluton dominantly consists of granodiorite, less diorite and granite. This pluton is located in the Song Ma suture and assigned to the Dien Bien complex. Geochemically, the Muong Luan granitoid rocks are characterized by a wide range of SiO₂ contents (59.9–75.1 wt%) and high K₂O contents. They display typical features of I‐type granites. The presence of hornblende and no muscovite and cordierite in the rocks further supports for I‐type character of granitoids. The emplacement age of the Muong Luan pluton obtained by LA–ICP–MS U–Pb zircon is at 242–235 Ma, corresponding to Indosinian time. Zircon ε_Hf values of –5.6 to –10.4, in combination with moderate Mg values of 34–45 suggested that the Muong Luan granitoid was derived from partial melting of mafic crustal source rocks, which are probably Paleoproterozoic in age as revealed by Hf model ages (T_DM2 = 1624–1923 Ma).     

Comparative modelling approaches of hydro-mechanical processes in sealing experiments at the Tournemire URL

In this paper, a comparative modelling exercise from the DECOVALEX-2015 project is presented. The exercise is based on in situ experiments, performed at the Tournemire Underground Research Laboratory (URL), run by the IRSN (Institut de Radioprotection et de Sûreté Nucléaire), in France. These experiments aim at identifying conditions (e.g. technical specifications, design, construction, and defects) that will affect the long-term performance of swelling clay-based sealing systems, which is of key importance for the safety of underground nuclear waste disposal facilities. A number of materials are being considered as seals; the current work focusses on a 70/30 MX80 bentonite–sand mixture initially compacted at a dry density of 1.94 Mg/m³. The performance of the sealing plug involves at least three different important components, which are the hydro-mechanical behaviour of the bentonite–sand core, the overall permeability of the surrounding argillite, and the influence of the technological gap between the core and the argillite. Two particular tests have been selected for a comparative modelling exercise: the WT-1 test, which was designed to study the rock mass permeability, and the PT-A1 test, which aimed at quantifying the evolution of the hydro-mechanical field within the bentonite–sand core. A number of independent teams have worked towards modelling these experiments, using different codes and input parameters calibrated on additional small-scale laboratory experiments. Their results are compared and discussed.     

The effect of flocculant solution transport and addition conditions on feedwell performance in gravity thickeners

Solid–liquid separation of tailings slurries in gravity thickeners relies on the efficient mixing of slurry and dilute polymer flocculant solutions within the feedwell. Computational fluid dynamics (CFD) can provide predictions of solids distribution, liquor velocity and shear rate within a feedwell, and with the incorporation of an adsorption model, can also assess the effectiveness of flocculant mixing. This study presents the first use of feedwell CFD to examine the effect of the flocculant inlet direction and velocity on the subsequent distribution and adsorption of flocculant. When flocculant is injected inside the feed stream, a high inlet nozzle velocity will maximise adsorption, with injection preferably vertically upward or towards the feedwell walls. For injection inside the dilution stream (vertical upflow of liquor within the feedwell), the flocculant should be directed either upwards or inwards away from the strong downward flow of the feed stream, with the velocity not critical.At flocculant inlet velocities predicted by CFD to enhance mixing and adsorption, the shear rate experienced within the injection pipe exceeds that in the feedwell, and the duration under higher shear may be greater. Pipe flow studies for several flocculants have confirmed reductions in activity at a solution concentration of 0.025 wt.%; this effect diminishes with greater dilution. Much of this lost activity is recovered on standing, indicating that the applied shear leads to a mixture of chain scission (irreversible) and entanglement (reversible). Minimising the duration of such shear effects on flocculant solution transport to the feedwell is essential, as the potential for increased flocculant demand and reduced flocculation efficiency can easily exceed any benefit from improved feedwell mixing.