Acoustic Mode Frequencies of the Sun During the Minimum Phase Between Solar Cycles 23 and 24

We investigate the spatial and temporal variations of the high-degree mode frequencies calculated over localized regions of the Sun during the extended minimum phase between solar cycles 23 and 24. The frequency shifts measured relative to the spatial average over the solar disk indicate that the correlation between the frequency shift and magnetic field strength during the low-activity phase is weak. The disk-averaged frequency shifts computed relative to a minimal activity period also reveal a moderate correlation with different activity indices, with a maximum linear correlation of about 72?%. From the investigation of the frequency shifts at different latitudinal bands, we do not find a consensus period for the onset of solar cycle 24. The frequency shifts corresponding to most of the latitudes in the northern hemisphere and 30° south of the equator indicate the minimum epoch to be February 2008, which is earlier than inferred from solar activity indices.     

Obituary

Geological sections are still best drawn at natural scale. Sections with vertical exaggerations are rarely drawn correctly, and even when computed carefully give a false notion of the structural features. Many schematic sections which are not drawn to scale and are supposed to explain a proposed new tectonic interpretation give such a distorted and frequently absurd picture of the structural features that they cannot be regarded as valid.     

Geology and petroleum potential of the Fairway Basin in the Tasman Sea

The Fairway Basin is a large, generally north – south-trending, sediment-filled structure in water 1500 – 3000 m deep, on the eastern slope of the Lord Howe Rise in the Tasman Sea, and is partly within Australian jurisdiction. It was poorly known until a few years ago, when seismic profiling and piston coring cruises were carried out. The basin, about 1100 km long and 120 – 200 km wide, can be divided into three segments—north, central and south—that trend northwest, north and north-northwest, respectively. All three segments probably formed by thinning of continental crust during breakup of Lord Howe Rise and surrounding aseismic continental ridges in the Late Cretaceous and Paleocene. Normal faulting, large inputs of terrigenous sediment and subsidence to bathyal marine depths occurred during that time. A period of compression, perhaps related to overthrusting on New Caledonia, occurred in the Eocene, leading to uplift (and in parts, erosion) of northern Lord Howe Rise, and reversal of faulting in the basin. By the Oligocene, the area was again in bathyal depths, and pelagic ooze and some turbidites accumulated. The basinal sequence is generally 2000 – 4000 m thick, with 1200 – 3200 m of Cretaceous to Eocene sediment concentrated in depocentres, capped by 500 – 800 m of Oligocene and younger sediment. In the depocentres, numerous sedimentary diapirs pierce sedimentary sequences. The sedimentary diapirs appear to be fed by Cretaceous muds deposited during rifting. Often, these diapirs are overlain by faults extending to the seafloor, and hummocky bathymetry is possibly caused by fluid escape. The overall geology suggests that the Fairway Basin may be a large frontier hydrocarbon province. Seismic profiles display a bottom-simulating reflector above many depocentres, 500 – 700 m below the seafloor. The bottom-simulating reflector has positive polarity, which could result from a diagenetic phase transformation, a thin gas hydrate layer with a sharp top, or from the sharp base of a gas layer (probably beneath gas hydrates). Standard piston cores taken above diapirs and apparent fluid-escape features have recovered little gas. Other than drilling, the next steps in assessing petroleum potential are to clearly document fluid-escape structures, and to sample any fluids emitted for hydrocarbons.     

The effect of Ca-Tschermaks component on trace element partitioning between clinopyroxene and silicate melt

We have studied the influence of Ca-Tschermaks (Calcium Tschermaks or CaTs) content of clinopyroxene on the partitioning of trace elements between this phase and silicate melt at fixed temperature and pressure. Ion probe analyses of experiments carried out in the system Na₂O–CaO–MgO–Al₂O₃–SiO₂, at 0.1 MPa and 1218°C, produced crystal-melt partition coefficients (D) of 36 trace elements (Li, Cl, Sc, Ti, V, Cr, Fe, Co, Ge, Sr, Y, Zr, Nb, Mo, Ru, Rh, In, Sn, Sb, Ba, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Hf, Ta and W), for clinopyroxene compositions between 10 and 32 mol% CaTs. Partition coefficients for 2+ to 5+ cations show, for each charge, a near parabolic dependence of log D on ionic radius of the substituting cation, for partitioning into both the M1 and M2 sites of clinopyroxene. Fitting the results to the elastic strain model of Blundy and Wood [Blundy, J.D., Wood, B.J., 1994. Prediction of crystal-melt partition coefficients from elastic moduli. Nature 372, 452–454] we obtain results for the strain-free partition coefficients of theoretical cations (D₀), with site radius r₀, and for the site's Young's Modulus (E).

In agreement with earlier data our results show that increasing ^ivAl concentration in cpx is matched by increasing D, E_M1, E_M2 and D₀ for tri-, tetra- and pentavalent cations. The degree of fractionation between chemically similar elements (i.e. Ta/Nb, Zr/Hf) also increases. In contrast, D values for mono-, di- and hexavalent cations decrease with increasing ^ivAl in the cpx. The large suite of trace elements used has allowed us to study the effects of cation charge on D₀, r₀ and E. We have found that D₀ and r₀ decrease with increasing cation charge, e.g. r₀=0.66 Å for 4+ cations and 0.59 Å for 5+ cations substituting into M1. Values of E_M1 and E_M2 increase with cation charge as well as with increasing ^ivAl content. The increase in E_M2 is linear and close to the trend set by Hazen and Finger [Hazen, R.M., Finger, L.W., 1979. Bulk modulus-volume relationship for cation–anion polyhedra. J. Geophys. Res. 84 (10) 6723–6728] for oxides. E_M1 values are much higher and do not fit the trend predicted by the Hazen and Finger relationship.     

Three-dimensional modelling of a Holocene tufa system in the Lathkill Valley, north Derbyshire, using ground-penetrating radar

Unlithified and partly lithified carbonate sequences are ideally suited to the application of ground‐penetrating radar (GPR), augmented by percussion augering and shallow seismic techniques, all tied to present‐day topography using global positioning system (GPS) methods. This methodology provides the first clear information on the distribution and geometry of lithofacies within buried tufa complexes. The approach has been applied to a thick succession of Holocene tufas filling a gorge site along a 3·5‐km length of the River Lathkill, north Derbyshire. Earlier studies have demonstrated the presence of up to 16 m of tufas and sapropels associated with two transverse tufa dams (barrages). These strata have been accumulating throughout the Holocene, although tufa developments at present are of minor extent. Internal tufa morphologies are recorded by GPR as ‘bright’, laterally continuous reflections for lithified, concretionary and lithoclast‐rich horizons. The ‘brightest’ reflectors occur within well‐cemented barrages and delineate core areas and prograding buttress zones. In contrast, unlithified lime muds and sapropels produce low‐contrast reflections. Lithostratigraphic control and depth calibration of the GPR profiles was provided by percussion augering at selected sites. Six distinct lithofacies and four secondary barrages are identified in the study. Constructional and destructional events can be identified and correlated within the GPR profile network, and the internal growth morphologies of the barrages are apparent. GPR profiles also clearly define the evolution of the facies geometries. Three phases of tufa development can be recognized within the GPR data and greatly extend our understanding of Holocene tufa‐forming processes in valley sites: (a) Early Holocene barrage build‐ups but with limited paludal deposition; (b) Middle Holocene ponding and sapropel accumulation under ‘warm’ conditions; and (c) Late Holocene barrage termination and valley levelling, probably coincidental with anthropogenic activity. This type of multidisciplinary approach should be considered as an essential prerequisite to all biostratigraphic and geochemical studies of Holocene freshwater carbonate sites.     

On the energy integral for first post-Newtonian approximation

The post-Newtonian approximation for general relativity is widely adopted by the geodesy and astronomy communities. It has been successfully exploited for the inclusion of relativistic effects in practically all geodetic applications and techniques such as satellite/lunar laser ranging and very long baseline interferometry. Presently, the levels of accuracy required in geodetic techniques require that reference frames, planetary and satellite orbits and signal propagation be treated within the post-Newtonian regime. For arbitrary scalar W and vector gravitational potentials \(W^j (j=1,2,3)\), we present a novel derivation of the energy associated with a test particle in the post-Newtonian regime. The integral so obtained appears not to have been given previously in the literature and is deduced through algebraic manipulation on seeking a Jacobi-like integral associated with the standard post-Newtonian equations of motion. The new integral is independently verified through a variational formulation using the post-Newtonian metric components and is subsequently verified by numerical integration of the post-Newtonian equations of motion.     

Solar-Cycle Variation of Subsurface-Flow Divergence: A Proxy of Magnetic Activity?

We study the solar-cycle variation of subsurface flows from the surface to a depth of 16 Mm. We have analyzed Global Oscillation Network Group (GONG) Dopplergrams with a ring-diagram analysis covering about 15 years and Helioseismic and Magnetic Imager (HMI) Dopplergrams covering more than 6 years. After subtracting the average rotation rate and meridional flow, we have calculated the divergence of the horizontal residual flows from the maximum of Solar Cycle 23 through the declining phase of Cycle 24. The subsurface flows are mainly divergent at quiet regions and convergent at locations of high magnetic activity. The relationship is essentially linear between divergence and magnetic activity at all activity levels at depths shallower than about 10 Mm. At greater depths, the relationship changes sign at locations of high activity; the flows are increasingly divergent at locations with a magnetic activity index (MAI) greater than about 24 G. The flows are more convergent by about a factor of two during the rising phase of Cycle 24 than during the declining phase of Cycle 23 at locations of medium and high activity (about 10 to 40 G MAI) from the surface to at least 10 Mm. The subsurface divergence pattern of Solar Cycle 24 first appears during the declining phase of Cycle 23 and is present during the extended minimum. It appears several years before the magnetic pattern of the new cycle is noticeable in synoptic maps. Using linear regression, we estimate the amount of magnetic activity that would be required to generate the precursor pattern and find that it should be almost twice the amount of activity that is observed.     

Describing and generating facies models for reservoir characterisation: 2D map view

This paper documents a new method for describing channel-related sedimentary deposits based on formal language theory. Using this method an analogue model of a sedimentary deposit can be encoded as a grammar. A program, called a parser, has been developed which can generate stochastic maps of these sedimentary deposits based on information in a specified grammar. The maps of sedimentary deposits generated by the parser have the same type, spatial arrangement, shape and size distribution as the analogue model. The successful generation of depositional maps represents a crucial step in the ongoing development of a new technique designed to generate 3D static geological models of sedimentary successions. The maps can be conditioned to match sparse hard data in the form of channel segments interpreted from seismic horizon maps.     

Effect of polychromatic X‐ray microtomography imaging on the amino acid content of the Murchison CM chondrite

X‐ray microcomputed tomography (μCT) is a useful means of characterizing cosmochemical samples such as meteorites or robotically returned samples. However, there are occasional concerns that the use of μCT may be detrimental to the organic components of a chondrite. Small organic compounds such as amino acids comprise up to ~10% of the total solvent extractable carbon in CM carbonaceous chondrites. We irradiated three samples of the Murchison CM carbonaceous chondrite under conditions akin to and harsher than those typically used during typical benchtop X‐ray μCT imaging experiments to determine if detectable changes in the amino acid abundance and distribution relative to a nonexposed Murchison control sample occurred. After subjecting three meteorite samples to ionizing radiation dosages between ~300 Gray (Gy) and 3 kGy with bremstrahlung X‐rays, we analyzed the amino acid content of each sample. Within sampling and analytical errors, we cannot discern differences in the amino acid abundances and amino acid enantiomeric ratios when comparing the control samples (nonexposed Murchison) and the irradiated samples. We conclude that a polychromatic X‐ray μCT experiment does not alter the abundances of amino acids to a degree greater than how well those abundances are measured with our techniques and therefore any damage to amino acids is minimal.