Stable isotope study of the Archaean rocks of the Vredefort impact structure,central Kaapvaal Craton,South Africa

The Vredefort dome in the Kaapvaal Craton was formed as a result of the impact of a large meteorite at 2.02 Ga. The central core of Archaean granitic basement rocks is surrounded by a collar of uplifted and overturned strata of the Witwatersrand Supergroup, exposing a substantial depth section of the Archaean crust. Orthogneisses of the core show little variation in whole-rock δ ¹⁸O value, with the majority being between 8 and 10‰, with a mean of 9.2‰ (n = 35). Quartz and feldspar have per mil differences that are consistent with O-isotope equilibrium at high temperatures, suggesting minimal interaction with fluids during subsequent cooling. These data refute previous suggestions that the Outer Granite Gneiss (OGG) and Inlandsee Leucogranofels (ILG) of the core represent middle and lower crust, respectively. Granulite-facies greenstone remnants from the ILG have δ ¹⁸O values that are on average 1.5‰ higher than the ILG host rocks and are unlikely, therefore, to represent the residuum from the partial melting event that formed the host rock. Witwatersrand Supergroup sedimentary rocks of the collar, which were metamorphosed at greenschist-to amphibolite-facies conditions, generally have lower δ ¹⁸O values than the core rocks with a mean value for metapelites of 7.7‰ (n = 45). Overall, through an ∼20 km thick section of crust, there is a general increase in whole-rock δ ¹⁸O value with increasing depth. This is the reverse of what is normal in the crust, largely because the collar rocks have δ ¹⁸O values that are unusually low in comparison with metamorphosed sedimentary rocks worldwide. The collar rocks have δD values ranging from −35 to −115‰ (average −62‰, n = 29), which are consistent with interaction with water of meteoric origin, having a δD of about −25 to −45‰. We suggest that fluid movement through the collar rocks was enhanced by impact-induced secondary permeability in the dome structure. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

基于主成分分析的东江流域水资源承载能力评价

本文分别介绍了主成分分析法的原理和算法,并将其运用到东江流域水资源承载能力评价中,并且与模糊综合评价结果进行比较。结果表明：两评价方法的评价结果都是东江流域水资源承载能力呈现中上游高下游低的分布趋势,对此提出水资源可持续利用的对策,以促进流域水资源与社会经济的协调发展。     

Geomagnetic multipoles, 1829 to 1960

Summary Using the results of spherical harmonic analyses of the geomagnetic field for some fourteen different epochs, includingGauss' first analysis for epoch 1835, and theErman-Petersen analysis for epoch 1829, the strength and axes of geomagnetic multipoles have been computed. In particular, a dipole from the three first order spherical harmonic coefficients, a quadrupole from five second order coefficients, and an octupole from seven third order coefficients. The axes of the quadrupole and octupole have moved quite rapidly when compared with movements of the dipole axis, and show a general movement westwards. Although the strength of the dipole has generally diminished, the strengths of the quadrupole and octupole have generally increased.On leave National University of La Plata, Argentina     

Inhomogeneous substrate analysis using EM300 backscatter imagery

Backscatter reflectivity from multibeam echo-sounders provides a powerful tool to efficiently characterize seafloor substrates. A comprehensive EM300 bathymetric and backscatter survey has been completed of Cook Strait, in central New Zealand. This paper presents a detailed analysis of the realtime corrections applied to the raw EM300 multibeam data and additional corrections required to compute angular variations of the backscatter strength. The corrections, including the local absorption coefficient, the influence of seafloor topography and sound refraction in the water column, are determined for different Cook Strait seafloor substrates. Modifying MB-System software code, we extracted the backscatter signal parameters in order to quantify the raw backscatter strength and apply additional processing. Profiles of backscatter strength versus incidence angle were computed for a variety of sites characterized by flat seafloor and homogeneous substrates, and for which ground-truth data were available. For each homogeneous site, different but characteristic backscatter profiles are observed that can be interpreted in terms of sediment facies. To analyze heterogeneous substrates, we present a statistical technique, based on a 3-dimensional distribution of (incidence angle, backscatter strength) couples that preserves geological information of the substrate components. This analysis, using backscatter data acquired on a submarine volcano, north of New Zealand, clearly differentiates soft sediments and lava flows within a heterogeneous substrate.     

Thickening of the oceanic layer in the Pacific Ocean

A statistical analysis of published seismic refraction results in the Pacific Ocean confirms the existence of a progressive thickening of the oceanic layer with age, following an inverse exponential law. There is no strong indication in the Pacific data of an increase in the thickness of layer 2 with decreasing spreading rate.Contribution No. 93 of the Département Scientifique of the Centre Océanologique de Bretagne, B.P. 337, 29200, Brest, France.     

长江三峡工程对长江口外流场的影响

长江三峡枢纽工程是综合开发利用长江水利资源的一项举世瞩目的大工程，建成后将对我国社会主义建设带来巨大的经济效益。但是，也必须考虑到它对长江下游流域以至河口及其邻近海域的生态环境带来的影响。因此，必须在工程建设之前进行深入研究。 根据“三峡工程对长江河口区生态与环境的影响和对策”这一课题的要求，本文就三峡工程对长江口区流场的影响作一初步分析。     

清水沟流路期间黄河三角洲区潮波运动的模拟和预测

为了探讨黄河三角洲附近潮波运动的变化特征，乐肯堂等(1995)用二维数值模式模拟了1855-1984年该海区的潮汐和潮流的分布变化，并着重考察了M2和S2分潮的无潮点，以及规则全日潮区的位置变化。乐肯堂等(1995)的研究表明，黄河尾闾的摆动以及由此而造成的黄河三角洲之进退，是该海区潮波特征发生变化的主要外因。自从1976年黄河尾闾改道清水沟以来，该流路已稳定运行了20多年，由此造成了河口附近沙嘴不断向莱州湾内延伸，因而对该区的潮波分布特征产生了显著影响。从黄河三角洲区的经济可持续发展和海洋生态环境的可持续发展的目的出发来规划今后黄河尾闾的走向，就必须对以下两个问题进行深入研究：(1)清水沟流路是否还能长期稳定下去；(2)如果清水沟流路长期稳定不变，并且按照清水沟流路期间黄河三角洲向莱州湾推进的方式来推演10a后黄河三角洲的形势，那么到2010年该区的潮波运动将会发生什么变化。为此，在本文中我们仍然采用乐肯堂等(1995)已经过验证的数值模式和数值预的方法对上述问题作初步探讨。     

Isolation and characterisation of pristane metabolites formed in vivo by rainbow trout

Pristane (2,6,10,14 -tetramethylpentadecane) occurs ubiquitously in the marine environment. This hydrocarbon may be of biogenic or petrogenic origin.¹ Recently it has been shown that residual amounts of this branched alkane increased in marine organisms after an oil spill.^2,3 The lack of data on the fate of pristane in fish, added with the fact that this compound was considered by some authors as a non-metabolisable substance in vertebrates, including man,⁴ led us to investigate the capability of fish to metabolise pristane. In this study, urinary and fecal excretion, tissue distribution and metabolism of ³H-pristane were analysed in Salmo gairdneri R. after a single intragastric dose. In addition to unchanged hydrocarbon, various labelled compounds have been isolated and identified in liver, bile, faeces, urine and surrounding water, demonstrating that pristane was first oxidised to alcohols (pristanol and pristane-diol) and to acid (pristanic acid). The elimination of these compounds occurred in the form of conjugated products (primarily glucuronides) as well as free metabolites.     

Automatic Registration of TOBI Side-Scan Sonar and Multi-Beam Bathymetry Images for Improved Data Fusion

Deep towed side-scan sonar vehicles such as TOBI acquire high quality imagery of the seafloor with very high spatial resolution but poor locational accuracy. Fusion of the side-scan sonar data with bathymetry data from an independent source is often desirable to reduce ambiguity in geological interpretations, to aid in slant-range correction and to enhance seafloor representation. The main obstacle to fusion is accurate registration of the two datasets.The application of hierarchical chamfer matching to the registration of TOBI side-scan sonar images and multi-beam swath bathymetry is described. This matches low level features such as edges in the TOBI image, with corresponding features in a synthetic TOBI image created by simulating the flight of the TOBI vehicle through the bathymetry. The method is completely automatic, relatively fast and robust, and much easier than manual registration. It allows accurate positioning of the TOBI vehicle, enhancing its usefulness as a research tool. The method is illustrated by automatic registration of TOBI and multi-beam bathymetry data from the Mid-Atlantic Ridge.     

Open sea berths for liquid bulk carriers

The transfer of liquid bulk through flexible transfer lines can be accomplished despite relatively large ship motions. For this reason, open sea berth terminals have replaced conventional harbors in many places. The thorough understanding of moored ships dynamics when subjected to waves, wind and currents, combined with the use of flexible dolphins, flexible fenders, asymmetric constant-tension winches and nylon tails permit us to design open sea berth terminals for relatively exposed areas. The design of an integrated system of marine sensors to continuously monitor all the critical elements-ship motion and mooring and fender forces-will enhance the operational procedure whilst insuring safe operations. A berth code can then be established for insuring the maximum efficiency of the terminal on the basis of the measurement of these critical elements.